Supports

AirLoc Wedgmounts Provide Building Floor Load Support & Vibration Isolation
Leg Levelers

AirLoc Wedgmounts Provide Building Floor Load Support & Vibration Isolation

It is a common occurrence that upper floor loadings in existing buildings are changed with the installation of new and frequently heavier machinery. Therefore, existing floors may reach their load limits. In addition, there is danger of exciting critical vibration frequencies when floors, with low natural frequencies, are coupled with the disturbing frequencies of machinery supported on them. In...

Read More »
Cable Retainer facilitates cable run direction changes.
Cable Hangers

Cable Retainer facilitates cable run direction changes.

Installed vertically or horizontally on racks, ceilings, and walls, CADDY® CATCR50 plastic, low-voltage cable support is designed for use with CAT 5e and higher, fiberoptic, and coaxial cable. Rounded edges avoid over-bending and kinking of cables, and closure has locking teeth that retain bundled cable in one-piece support. UL®-recognized for air-handling spaces, product requires...

Read More »
Independent Support Clips accommodate tall T-grids.
Miscellaneous Clips

Independent Support Clips accommodate tall T-grids.

Designed to meet requirements of NEC® Article 410.16-C, CADDY® IDS series accommodate 1Â-½ and 1¾ in. tall ceiling substructures (T-grids) in order to provide separate means of support for fixtures. Products have static load limit of 65 lb, and optional barrel nuts are available for low-profile track lighting. Packaged with all mounting hardware included, products do not...

Read More »
Equipment Supports are used on roofs and below raised floors.
Supports

Equipment Supports are used on roofs and below raised floors.

CADDY® PYRAMID Pipe and Equipment Support Models 50, 150, 300, and 600 consist of polyethylene foam block that absorbs shock and vibration but not water, and metal top with electro-galvanized finish that offers corrosion protection from weather and other environmental conditions. They hold up to 50, 150, 300, and 600 lb loads, respectively. Model 25 is all-plastic, 4 x 5 in. UV-rated...

Read More »
Supports

Support System holds working loads up to 44 lb.

Available in 6.6, 16.4, and 32.8 ft lengths, galvanized steel CADDY® SPEED LINK LD suspends static loads, even at angle, and offers alternative to jack chain and threaded rods in lighting, ductwork, and other installation projects. Wire rope measures 0.059 in. with crimped-on hook that holds working loads up to 44 lb with 5:1 safety factor. Stainless steel locking device ensures stability...

Read More »
Support System facilitates overhead lighting installations.
Wire Cable and Fiber Rope

Support System facilitates overhead lighting installations.

For overhead decking applications, CADDY® SPEED LINK LD comes with universal toggle/wire rope assembly in 6.6, 16.4, and 32.8 ft lengths. Optional Y-toggle consists of 20 or 31 in. length of wire rope with toggle on each end. Center of wire rope is looped and crimped. Universal support system suspends static loads, even at angles, such as lighting fixtures, speakers, alarm sensors, signage,...

Read More »
Supports

Cable Hanging Support facilitates trapeze installation.

Gripple Wire Cable Hanging Support attaches directly to FAS (Fast Assembly System) Profile, securely suspending wire cable tray from any overhead structure or ceiling deck. Gripple cable brake adjusts quickly and securely without requiring special tools. Suited for use with any width cable tray, system comes with 100 or 200 lb, 10 ft cable and 3 attachment options. Trapeze Clip accessory lets...

Read More »
Air-Terminal Bases minimize number of required parts.
Supports

Air-Terminal Bases minimize number of required parts.

Stamped from copper alloy or aluminum, LP302 universal air-terminal bases mount horizontally or vertically to provide lightning-protection installer with one product for adhesive or screw-down applications. Stampings' spring-like property keeps cable under pressure, while protrusions on bases prevent loosening and optimize cable-pullout strength. Bases, suitable for use with Class I up to 4/0...

Read More »
Rooftop Pipe Support features lightweight, sled design.
Supports

Rooftop Pipe Support features lightweight, sled design.

Offering alternative to wood blocks, straps, and clips, UV-rated CADDY® Rooftop Pipe Support features 4 x 5 in. footprint with sled design that distributes load evenly and protects roof membrane. Integral pipe-retaining mechanism ratchets down to hold pipes securely or can be set for loose guiding to accommodate for thermal changes. Weighing less than 1/3 lb, support holds up to three...

Read More »
Support System suspends static loads.
Supports

Support System suspends static loads.

Consisting of 1.5 mm wire rope with crimped-on hook, CADDY® SPEED LINK LD holds working loads up to 44 lb with 5:1 safety factor. Stainless steel locking device ensures stability and allows for additional vertical adjustment after wire insertion. System installs without drilling or tools and allows objects to be hung at an angle. Available in 6.6, 16.4, and 32.8 ft lengths, CADDY®...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers