Supports

Cable Support simplifies cable installation.
Supports

Cable Support simplifies cable installation.

X-Hook(TM), with Xylan® coating for smooth, frictionless surface, eliminates need for cable rollers. It is suitable for pulling cable and for use in corners, drop-outs, or any direction change in cable run. Three sizes are available and include Qwik-Latch(TM) cable retainer.

Read More »
Rail Systems install easily to support and manage cables.
Miscellaneous Trays

Rail Systems install easily to support and manage cables.

Data-Track® features built-in barrier and is NEMA and CSA tested to 12C. Suitable for narrow spaces, Verti-Rack® offers cable system separation and is expandable with Add-a-Rung®. Half-Rack® attaches directly to wall without spacers or brackets. Multi-Tier Half-Rack® holds up to 4 tiers in one installation. Data-Track, Half-Rack, and Multi-Tier Half-Rack need no...

Read More »
Cushioned Pads eliminate duty belt lower back and hip soreness.
Supports

Cushioned Pads eliminate duty belt lower back and hip soreness.

BACK-UP pads are made from polyester fabric to withstand rigors of every day use. They are wrapped around pants belt, and secured by hook-and-loop fastener. Duty belt is donned as usual, and rides on cushioned pads. For lower back problems, officers use them 1-2 in. on either side of spine. For relief from hip soreness, placement 1-2 in. in front of and in back of painful area is recommended.

Read More »
Bridle Ring Saddles support datacom cables.
Supports

Bridle Ring Saddles support datacom cables.

Bridle Ring Saddles are offered in 2 and 4 in. models. Pronounced rounded edge provides cable protection during installation. Two inch saddle is available separately for jobsite installation, and can be attached to bridle ring before or after cable installation. Through use of other fasteners, bridle ring saddle assemblies can be attached to variety of structures, providing quick installations...

Read More »
Peel-and-Stick Steel Fastener protects cables and tubes.
Cable Protectors

Peel-and-Stick Steel Fastener protects cables and tubes.

BM3M Stick-On Nail Plate protects cables, plastic pipes, and copper tubes from nails and screws. Requiring no tools or screws, product offers industrial-grade, double stick tape that adheres to wood and metal studs. Fastener complies with NEC Article 300.4 (A), (D), and (E). In addition to BM3M Stick-On Nail Plate, BM3 Hammer-On Nail Plate is also available.

Read More »
Support Bracket organizes MC/AC cables.
Supports

Support Bracket organizes MC/AC cables.

CADDY® MCS 100 properly spaces MC/AC cables to eliminate bundling and NEC derating issues. Multifunctional, modular bracket neatly isolates, supports, and secures cables while maintaining access and flexibility. It handles up to 8 MC/AC cables and range of sizes including 14-3, 14-4, 12-2, 12-3, 12-4, and 10-2. Mild steel bracket features electro-zinc finish and locking tab that prevents...

Read More »
Conveyor Hanger System eliminates welding and bolting.
Supports

Conveyor Hanger System eliminates welding and bolting.

With mechanical design, system utilizes Â-¾ in. piece of flame-cut steel plate machined in form of letter J. With J-hook facing down, piece is pre-welded horizontally aside top of steel angle. System is attached by wrapping J-hook around top of support channel. J-hook grips protruding edge of beam while vertical steel bar of hanger rests against back of supporting C-channel. Once in place,...

Read More »
Cable Support System provides pathway for wires and cables.
Supports

Cable Support System provides pathway for wires and cables.

CADDY CABLECAT CAT-CM utilizes U-Hooks and double J-Hooks with rounded support surfaces/edges to avoid over-bending and kinking of cables. Installation options include Rod-Mount, which allows for field assembly of hooks onto All-Thread Rod; Cantilever-Mount, which consists of U-Hooks mounted on brackets; and Strut-Mount, which uses sheet-metal U-hooks with quick-attach strut fasteners. Components...

Read More »
Clip positions and protects cable and pipe in metal studs.
Miscellaneous Clips

Clip positions and protects cable and pipe in metal studs.

CADDY(R) AR812 positions electrical and mechanical services cable in center of stud to comply with NEC 300-4(d). It provides anti-rattle support and protects conduit, pipe, and MC/AC cable from metal stud edges and penetrating nails and screws. One-piece, spring-steel design eliminates need for screws. Clips are UL listed for positioning in electrical applications.

Read More »
Safety Products protect users from work-related strain.
Supports

Safety Products protect users from work-related strain.

Back supports include Lifbak 5 in. belt, Flexbak(R) belt, Maxbak(R) weightlifting-style belt, and Deluxe Spanbak, constructed of spandex-type material. Kneepads, available in over 12 different knee pad designs, include MaxKnee and FlexKnee, Welding Knee, and Leather Knee. 6 different wrist supports include Dual-Flex(TM), Maxrist®, Flexrist(TM), A400, and A410. Anti-vibration and lifting...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers