Strain Reliefs

Strain Relief provides low vertical profile.

Strain Relief provides low vertical profile.

Strain relief is designed for Minitek(TM) 2.00 mm pitch Insulation Displacement Connector (IDC) cable receptacles. Assembled strain relief and IDC receptacle, including flat cable, measure 12.5 mm in height. Strain Relief offers additional retention force for cable attachment and protection of IDC contact terminations, making them suited for applications in harsh environments such as industrial...

Read More »

Electric Cord and Cable Grips offer pulse-free strain relief.

Suited for applications where limited clearance exists inside electrical cabinets/housings, Snap-In Cord Grips can be configured for electrical power, HVAC, and systems-management installations. They allow cords and cables from .079 to more than 1 in. dia to insert through grips, without binding or scraping of insulation which facilitates safe, secure passage. Grips are constructed from polyamide...

Read More »
AQV1 Molded Strain Relief

AQV1 Molded Strain Relief

MEGA Electronics Inc. is please to announce the addition of the AQV1 molded strain relief to our line of powercord products. The AQV1 has a PG11 thread made of PVC and is available with or without a Nylon locking ring. Capable of handling from 5mm to 10mm cable, the AQV1 can be molded onto cables for both the domestic and international markets. Available in a variety of colors and with various...

Read More »

Cable Management Device helps make workplaces safer.

Designed to keep excess cord lengths neatly contained, Cable Capture helps eliminate potential tripping hazards and allows cords to be identified and removed or added if necessary. Full-sized unit can hold up to 8 ft of standard AC cord, while Cable Capture Jr. holds up to 6 ft of small-diameter cord. Units can be connected together to completely control, organize, and hide multiple cords and...

Read More »
Strain Relief Clamp protects cords in critical applications.

Strain Relief Clamp protects cords in critical applications.

Made from galvanized steel, ETCO Strain Relief Clamps grip cable or cord inside equipment to protect against damage caused by pulling or stretching. They help extend cord life and reinforce cord connection in any high-voltage application. Offered in several configurations for use on round and flat parallel power cords, products are suited for protecting electric range and dryer cords as well as...

Read More »
Cordgrips offer liquid-tight seal.

Cordgrips offer liquid-tight seal.

Heyco-TITE family of cordgrips is suited for flexible wire cables and cords in electrical enclosures including NPT, metric, and PG threads, and is available in straight-thru, pigtail, and right angle configurations. They are made of 6/6 polyamide nylon with Buna N sealing glands, and are resistant to salt water and most common solvents. Units are UL listed, CSA certified, have IP rating of 68 per...

Read More »
Cord Grips have snap-in design for space-restricted areas.

Cord Grips have snap-in design for space-restricted areas.

Suited for fixed and mobile applications, Snap-In-Mount Cord Grips are custom-manufactured to accommodate cable and wire diameters from .079-1.00 and above. Smooth, rounded interior edges allow insertion of cords and cables through grips without binding or scraping of insulation. Constructed from polyamide 6/6 nylon, products resist pulling, twisting, and pulsing forces; are chemical-resistant;...

Read More »
Strain Relief Connectors provide pullout protection.

Strain Relief Connectors provide pullout protection.

Grip-Tite Connectors help secure and seal cords or cables entering enclosure or cabinet. Two-piece internal design features nylon gripper coupled with neoprene grommet. Body and gland nut are malleable iron with protective zinc electroplate finish. Suited for NEMA 4 enclosures and other wet locations, connectors are rated liquidtight, oiltight, and raintight. Sizes range from -½ to 3 in....

Read More »
Cord Grips connect and seal.

Cord Grips connect and seal.

Tuff-Seal strain-relief cord connectors, liquid tight connectors and watertight conduit hubs are available in six different materials of construction: diecast zinc for residential and commercial applications; aluminum for general industrial facilities; nylon for environments with high moisture content; steel for durability in tough environments; valox for use in washdowns; and stainless steel,...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics