Circular Cold Saw efficiently cuts large materials.
Model HCS 150 Behringer Eisele Automatic Carbide Circular Cold Saw is designed specifically to cut materials up to 5.9 in. in dia for solid rounds and squares up to 5.3 in. in size. System cuts ferrous metals at 90° with carbide-tipped saw blades ranging from 14.1-18.1 in. in diameter. Controlled by PLC, unit can store numerically controlled program applications such as number of pieces to...
Read More »
Cross Cut Saw offers intelligent optimization.
Utilizing scanning technology and System TM's optimizing software, Opti-Kap 5003 provides optimal utilization of lumber, delivering high capacity with minimum of wood waste. Cross cut saw can be mixed and matched with System TM's Opti-Feed and Opti-Stack solutions.
Read More »
Dado Sets cut thin-width grooves.
Available in 2 different sets, Thin Kerf Dados cut grooves in thin plywood, MDF, or melamine boards. Two-piece set includes two 24-tooth outside saw blades and set of magnetic adjusting shims for 3/16 in. cuts, while 3-piece set includes outside saw blades plus 1/16 in. chipper with magnetic shims for creating cuts from 3/16 to Â-¼ in. Both work on table or radial arm saws with 5/8 in. bore....
Read More »
Circular Cold Saws Offer Flexible Cutting Alternative and Superior Finishes, Often Eliminating Secondary Operations
Morgantown, PA (March 27, 2009) - Designed and built in its engineering centers and factories in Germany, the Behringer Eisele brand of circular cold saws and automatic miter saws delivers high performance and fine finish cutting of steel, aluminum and other non-ferrous metals for almost every application and budget. The Behringer Eisele line is sold and serviced throughout North America from its...
Read More »
Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components
A comprehensive exploration of a new wrought copper alloy wire used in powder metallurgical infiltration methods.
Read More »Kalamazoo Industries Products Receive CE Certification for Sale In Europe
Kalamazoo Industries announced it has received CE certification on its line of wet saws and can manufacture sanders to that European standard for sale into the countries of the European Union (EU) and the European Economic Area (EEA). Kalamazoo Industries models covered include K10SW abrasive saw, K12-14CS masonry saw, K12-14MS metallurgical saw, the K12-14W abrasive cut-off saw and the KM20-22...
Read More »
Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw
Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw Eliminates Abrasive Particle Dispersion Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw features an enclosed wet cutting area with dual coolant nozzles to effectively eliminate the dispersion of abrasive particles into the workplace. The saw has a 14-inch abrasive wheel, a 5 HP, 3 phase , 1725 RPM TEFC motor, dual moveable...
Read More »Kalamazoo Industries Model K20SW-PHV Semi-Automatic Wet Cut Saw Offers Precise Feed Control
Kalamazoo Industries Model K20SW-PHV Semi-Automatic Wet Cut Saw has an air-over-oil precise feed control and variable feed rate from 0-12 FPM for precise feed control. Capacity is up to 4-inch solids, 6-inch shapes. The saw is semi-automatic, with the saw head returning at the end of cut. The saw features an air chain vise 1/3 HP coolant pump, cast iron upper arm and trunnions, a 15 HP TEFC, 3...
Read More »
Circular Sawing Machine suits auto exhaust manufacturing.
With cycle time of seconds, Model KKS450 'R' can cut two 2 in. stainless steel exhaust tubes side-by-side. Machine features 3 in. thick table for rigidity and facilitating location of jigs/fixtures commonly employed in automotive applications. Adjustable long-stroke top clamp with electronic relief adjustment and 2nd work height position facilitate unloading/loading of components. Employing...
Read More »
Metal Cutting Circular Saws feature dry cutting technology.
Equipped with 15 A motor that delivers 2,500 rpm, 9 in. Metal Devil® provides max cutting depth of 3Â-¼ in. and can cut up to 3 in. square tubing. It includes laser guide, 0-45° bevel cutting, and quick-release chip collection cover. Powered by 9 A motor that provides 3,500 rpm, 7 in. Metal Devil® cuts ¼ in. thick mild steel. It features retractable blade guard,...
Read More »Cross-Cut Saws feature precise tolerances to ±0.005 in.
Offering adjustable cut lengths to 60 in., USX-Series Cross-Cut Saws let manufacturers dedicate existing horizontal panel saw to rip cutting and then send linear strips to cross cut saw. Products have totally concealed blades, scoring, and full length pneumatic hold-down. Offered with manual or computerized controllers, automatic pusher indexing systems, and material grippers, saws feature up to...
Read More »
Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »
