Slitters

Pay-Out and Take-Up Reels

Duckbill Reel Slabber Makes Short Work of Peeling Off Left-on-Spool Loses

GRAND RAPIDS, MI - April 16, 2007 - One reason left-on-spool losses cannot be slit or rewound onto smaller rolls is because of the tension control problems they would cause on the rewinder. But that's not all. The left-on-spool paper is generally so wrinkled and torn or in some other way soiled or marred that it's simply unsellable. It must be stripped or slabbed of the reel and sent to the...

Read More »
Slitters

New Millennium Steel - Install of New SMS Demag Slitting Line

New Millennium Steel installed a new SMS Demag Ltd. slitting line at its steel processing and distribution center in Salem, Virginia. The line will have a capacity of .209 inches x 62 inches in slitting, processing 60,000 lb and run at a speed of up to 500 feet per minute while processing 11 cuts at maximum gauge. Its features include a single eccentric type, injecta-head" half head slitter...

Read More »
Marking Equipment

BMP Metals Inc. Uses Mate Sheetmarker® Tool to Score Protective PVC Covering on Stainless Steel Sheets Prior to Silk Screening - Enables 24/7 Fabricating of High End Barbecue Components

Mississauga, Ontario: 24/7 unattended machine operation is very important to high volume, progressive companies like BMP Metals Inc. With seven turret presses, three of which are operated continuously unattended whenever possible, finding a way to eliminate a slow and tedious hand operation for scoring protective PVC plastic covering on sheet metal parts was imperative By implementing the Mate...

Read More »
Slitters make precise shear or crush cuts.
Cutters and Cutting Machinery

Slitters make precise shear or crush cuts.

Suited for moderate-volume web processing lines, ACU-SLIT(TM) delivers clean, exact cuts to variety of rolled material. ACU-SLIT SLS shear cut slitter features spring-loaded upper knife that cuts up to 12 ft wide rolls in 3/8-1 in. strips. ACU-SLIT SLC crush cut slitter handles thicker, low-density materials such as filter media and non-wovens. Both models can be manual or motorized and are...

Read More »
Roll Splitters eliminate manual roll removal.
Splitters

Roll Splitters eliminate manual roll removal.

Model 30 and Model 72 automatically remove defective and/or out-of-spec plastic stretch film, paper, foil, and paper waste from cardboard cores in as little as 8 sec. Designed to replace manual methods for roll removal, machines feature safety gate and mandrel that must be closed and secured to permit operation as well as see-through safety cage. Model 30 and Model 72 handle max roll diameters of...

Read More »
Trim Removal System operates at speeds over 5,500 fpm.
Trimmers

Trim Removal System operates at speeds over 5,500 fpm.

Able to handle any thickness or width of material without clogging, Automated TrimPAC(TM) cuts and evacuates trim and waste. It is pre-engineered for installation with in-line cutter, material handling fan, piping, air separator, inlet pickups, and other elements. Custom options include silent infeeds, fan enclosures, static eliminators, and mobility package. Machine handles packaging films,...

Read More »
Slitter cuts large rolls of material down to size.
Slitters

Slitter cuts large rolls of material down to size.

MagnaSlitter provides low volume slitting of vinyls, mylars, reflectives, application tapes, and nonwovens. Positive-locking chuck system and steel alloy blade ensure clean, accurate slit. End-loading design allows for easy change of rolls. Options include air-brake-on-blade assembly and auto-increment to eliminate manual measurement.

Read More »
Slitter/Sheeter offers shaftless unwind.
Sheeters

Slitter/Sheeter offers shaftless unwind.

Roll-Fed System slits and sheets rolls of material weighing up to 8,000 lb. Material is slit, accumulated through controlled gravity loops to restrict material stretch, and cut using gap shear cutter. Gripper stacker grabs sheets and stacks them for use. Operator needs only to load roll, adjust sheet length and slit width, and unload stacks of finished material for next processing operation.

Read More »
Belt Slitter cuts light to heavy grade belting.
Slitters

Belt Slitter cuts light to heavy grade belting.

Next Generation(R) Power Belt Slitter is free standing, hydraulically operated, and self-contained. Rewind assemblies at in-feed and out-feed can be engaged or disengaged to facilitate winding, loading, and unloading. ACME screw-scissor lift system lifts rolls up to 50,000 lbs. Knife holders allow use of 5/8 and 3/4 in. Hyde-type blades or Stanley exacto razor blades. High-speed capability of 250...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics