PowerPC Board enables flexible expansion using PMC modules.
Basic Automation Board 760 is available with 933 MHz PowerPC 750 GX CPU with 1 MB on-chip cache or 600-800 MHz PowerPC 750 FX with 512 KB cache. It includes 8 MB flash EPROM, 512 KB boot ROM, 32-1,024 MB SDRAM, Discovery I chip set, PCI local bus, and 32-bit VMEbus. Board supports OS-9 and VxWorks real-time operating systems, as well as ELinOS as embedded LINUX. It meets requirements associated...
Read More »
Single Board Computer suits fanless applications.
Featuring 128 Mb SDRAM, 3.5 in. Model ECM-3612 incorporates passively cooled VIA ESP10K 1 GHz/667 MHz processor, which consumes 7 W of power, eliminating need for CPU fan. VGA function with 32 Mb of shared memory is built-in to VIA VT8606 TwisterT chipset and can simultaneously display on CRT monitors and 18-bit dual channel LVDS LCD panels. AC'97 Codec sound chip provides stereo, full duplex...
Read More »
Single Board Computer suits space-restricted applications.
Offered with or without PCI-104 expansion slot for expandability, AR-B1520 fanless SBC features SiS 550 SoC architecture and integrates Compact Flash Type II socket for alternative storage devices. Unit has 4 serial ports for connectivity to serial devices, while VGA/LVDS interface supports CRT and TFT LCD display. Applications include thin client, automation, kiosk, and industrial control.
Read More »CPU Board suits PC/104 systems.
Based on Elan SC520 running at 133 MHz, Model 303 is equipped with 32 MB soldered-on flash memory, Compact Flash memory card, and sockets for 128 MB of SDRAM. System BIOS is programmed into on-board flash, enabling portable applications and operation system via Compact Flash module. Board includes 2 RS-232 ports, 4 three-wire ports, hard drive storage through IDE port, and rapid communications...
Read More »
Custom Progressive Metal Stamping for Manufacturing EMI Shielding
A Guide to Containing EM Radiation Through Custom Progressive Metal Stamping
Read More »Low-Power 486 CPU Module suits harsh environments.
Offering standalone capability and flexible I/O options, AX12200 STPC Atlas 133 MHz PC/104 CPU module is designed for continuous operation. Entry-level CPU card with integrated CPU and chipset requires +5 V power and measures 3.6 x 3.8 in. It features 4 COM ports with 1 RS/232/422/485 and 4 channels digital I/O. Along with support for CRT and TFT LCDs, product provides CompactFlash(TM) socket...
Read More »
I/O and Processor Modules target telecom manufacturers.
Telum(TM) AdvancedMC(TM) Modules provide telecom equipment manufacturers with range of options for creating carrier grade network applications featuring IntelÃ-® PentiumÃ-® M processors. Model PCIE-AMC-7S Chassis allows PCI-Express-based workstations or servers to control backplane populated with hot swappable AdvancedMC modules plugged directly into backplane. Standalone 2U 19 in....
Read More »PC/104+ CPU Module features onboard 10/100 Mbps LAN.
Designed for fanless operation, PFM-620S supports onboard IntelÃ-® ULV CeleronÃ-® 400 or 650 MHz processors. Product allows use of PC/104-bus devices, as well as PCI-104 and PC/104+ add-on devices, and is suited for 5 V single voltage input requirement applications. Graphics chip section allow resolutions to 1,280 x 1,024 pixels for CRT operation and 1,024 x 768 pixels for LCD output; TTL...
Read More »
CPU Card features 7 USB 2.0 ports.
Half-size Model HSB-835A employs Intel'sÃ-® 82865G chipset, which supports frequencies up to 3.2 GHz with FSB running at 400/533/800 MHz. It provides memory capacity up to 4 GB using DDR DRAM and supports dual-channel DDR memory interface. Additional features include onboard VGA controller, AGP 8X 2D/3D graphics accelerator, AC-97 Codec Audio, and support for one 10/100/1000Base-T Ethernet...
Read More »
Module/Board provide flexible development environment.
Offered with pre-installed operating system, Colibri SODIMM sized computer module is based on Intel XScale PXA270 processor. It runs at up to 520 MHz and consumes 800 mW of power optimized with Wireless Intel Speedstep Technology. Colibri also provides 10/100 Ethernet, 4-wire resistive touchscreen support, and interfaces for MemoryStick, CompactFlash, PCMCIA, and SDCard. Integrated 16 bit stereo...
Read More »
Embedded Computer suits medical and defense applications.
Drawing less than 5 W of power, 3.55 x 3.775 in. Lynx board is powered by x86-compatible (486-class) AMD ÃÆ'ââ¬-
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
