Shaft Collars

Mounting Shaft Collars come in 11 sizes from 0.5-2.0 in. ID.
Shaft Collars

Mounting Shaft Collars come in 11 sizes from 0.5-2.0 in. ID.

Stafford Accu-Mount(TM) Collars are suited for securing gears, pulleys, and sprockets onto shaft, and permit adjustability. Split design features 1 solid, square, and flat side, with 4 mounting holes for attaching components, and second side that clamps securely to shaft. Providing centering hub and rigid mounting method for various drive components, collars have smooth bore to protect shafts....

Read More »
Service creates hub that evenly distributes clamping power.
Shaft Collars

Service creates hub that evenly distributes clamping power.

Designed to optimize hub performance, Hub Treatment Service converts plain hubs on virtually any drive component into integral non-marring clamp that can be bored to size and finished with or without keyway. Treatment enables repositioning and provides vibration resistance. Integral clamp, or Accu-Clamp(TM) feature, retains integrity of hub and integrates self-centering clamping collar, which is...

Read More »
Shaft Collars feature instrument quality.
Shaft Collars

Shaft Collars feature instrument quality.

Suited for designers of medical, pharmaceutical, and scientific instruments or precision equipment, Stafford IQ Shaft Collars feature one-piece construction with radiused outside edges, 32 RMS finish on all surfaces, and self-locking clamping screw. Instruments are precision-balanced for use on high-speed rotating equipment and are offered in electro-polished stainless steel, steel, with hot...

Read More »
Plastic Shaft Collars feature stainless steel fasteners.
Shaft Collars

Plastic Shaft Collars feature stainless steel fasteners.

Machined from Delrin® and nylon, Plastic Shaft Collars come in 1- and 2-piece styles in sizes from Â-¼-3 in. ID. They can also be supplied as specials in sizes up to 14 in. ID with custom features such as square, hex, and threaded bores. Approved by FDA/USDA for food processing equipment, collars are suitable for mixers, conveyors, feeders, and packaging machinery requiring chemical,...

Read More »
Shaft Collars feature machined wrench flats.
Shaft Collars

Shaft Collars feature machined wrench flats.

Available in Â-½-1½ in. bore sizes for shafts and in 3/8-1½ in. sizes for SCH 40 pipe, Wrenching Shaft Collars are 2-piece collars with machined flats on OD that accept standard open-end wrenches. Machined from steel and fully split, they have smooth bores to provide additional protection for precision shafts, pipe, and thin-wall tubing. Allowing users to turn shafts and pipe...

Read More »
Steel Shaft Collars feature weldable design.
Shaft Collars

Steel Shaft Collars feature weldable design.

Machined from AISI 1018 steel, Weldable Shaft Collars are available in 1- and 2-piece styles to let users custom fabricate all types of drive, motion control, and structural components. Units are supplied standard in sizes from Â-¼-6 in. ID with specials up to 16 in. ID offered. Collars are suitable for creating parts such as gears, pinions, king pins, and levers.

Read More »
Stainless Steel Shaft Collars resist corrosion.
Shaft Collars

Stainless Steel Shaft Collars resist corrosion.

Made of 316 SS, Shaft Collars are available in 1- and 2-piece clamp-style designs with bore sizes from 1/8-2 in. and 3-50 mm. All are single point faced to ensure perpendicularity and proper alignment. Collars are suitable for medical, food processing, and pharmaceutical applications where washdown is required and contamination from corrosion must be avoided. Resistance to chloride corrosion...

Read More »
Shaft Collars lock in place when released.
Shaft Collars

Shaft Collars lock in place when released.

Suited for machinery or static applications, U-Clip shaft collars hold reels and tools in place on hardened or non-hardened shafts. Quick release, one-piece units are hand installed and have holding force of 55-80 lb depending on U-Clip size. They are available in 10, 12, 15, 16, 20, and 22 mm sizes, and feature spring loaded release plate that permits slide on/off action.

Read More »
Shaft Collars Feature up to 16" Bore
Shaft Collars

Shaft Collars Feature up to 16" Bore

Large bore shaft collars that are suitable for all types of large-scale construction, manufacturing, processing, and material handling equipment are available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Large Bore Shaft Collars are offered in one- and two-piece config-urations in inch, metric, and pipe sizes up to 16 I.D. and varying O.D.'s. Manufactured to...

Read More »
Shaft Collars

Torque Transmission Offers New Shaft Locking Options

Application-Matched Technologies Improve Pulley-To-Shaft Locking Fairport Harbor, OH - March 16, 2007 - Torque Transmission, an innovator in the engineering and manufacturer of high-quality, fractional horsepower drive components, has announced new options for customers requiring shaft locking mechanism for its line of high-performance gears and pulleys. Manufacturers are looking for ways to...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers