Self-Locking Pins

Self-Locking Pins

Lifting Pins feature quick-connect design.

Constructed with 17-4 PH stainless steel forged lifting ring, stainless steel Kwik-Lok(TM) Lifting Pins combine positive-locking pin, push button release design with 5:1 strength factor. Products accommodate range of lifting hooks or hardware, and load spreader bar on each ring helps prevent accidental actuation. Inch sizes offer pin diameters from Â-¼-5/8 in., grip lengths from 0.5-3.00...

Read More »
Positive Locking Pins offer alternative to detent pins.
Self-Locking Pins

Positive Locking Pins offer alternative to detent pins.

QUEST(TM) Series Kwik-Lok(TM) Positive Locking Pins feature 303 stainless steel body and recessed button with polycarbonate resin handle for impact, low temperature, and chemical resistance. Suited for commercial use in OEM and consumer products, units offer nominal pin diameters from 3/16-1 in. or 5-25 mm with ½-6 in. or 10-100 mm grip lengths.

Read More »
Threaded Detent Pins are held by spring force.
Self-Locking Pins

Threaded Detent Pins are held by spring force.

Solid alignment pins have ground shank and threaded end for knob handle, and locking balls hold pin in place by spring force. Knob handles can be permanently secured with thread-locking adhesive. Available in stainless steel, products come in standard shank diameters from 3/16-Â-½ in. and various grip lengths. Products require users to push to insert and pull to remove.

Read More »
Side Thrust Pins are available in metric sizes.
Self-Locking Pins

Side Thrust Pins are available in metric sizes.

By pressing pin body into proper bore size and depth, Side Thrust Pins hold, position, or clamp workpieces. Four versions are available: single sided with stainless steel ball and stainless steel spring, single sided with plastic ball and stainless steel spring, single sided with black oxide finish steel ball and elasticized plastic spring, and double sided with black oxide finish steel ball and...

Read More »
Side Thrust Pins and Bushings come in metric sizes.
Self-Locking Pins

Side Thrust Pins and Bushings come in metric sizes.

Suitable for holding, positioning, and clamping of workpieces, Side Thrust Pins feature knurled aluminum body that requires hole tolerance of H8. Available in light, standard, or heavy-duty end pressures, pins are zinc-plated hardened steel or Delrin plastic. Versions with NBR/perbunan rubber seal are gold-passivated and those without seal are silver-passivated. Made of steel with black oxide...

Read More »
Press Fit Side Thrust Pins are tapped without pin.
Self-Locking Pins

Press Fit Side Thrust Pins are tapped without pin.

Used in holding, positioning, and clamping of workpieces, Press Fit Side Thrust Assemblies have knurled body with aluminum, gold passivated finish. They require bore of H8 tolerance. While various sized assemblies are available in light-, standard-, or heavy-duty end pressures, all incorporate steel thrust plate hardened with black oxide finish and seals of NBR/perbunan rubber. User can design...

Read More »
Side Thrust Pin features threaded body.
Self-Locking Pins

Side Thrust Pin features threaded body.

Spring-loaded Side Thrust Pin has elements for holding, positioning, and clamping of workpieces. Protruding height can be adjusted with threaded body. Made of steel, thrust pin is zinc-plated and hardened. Version with seal has yellow finish, while unit without seal has blue passivated finish.

Read More »
Detent Pins meet or exceed Mil-P-45952/1.
Self-Locking Pins

Detent Pins meet or exceed Mil-P-45952/1.

Kwik-Lok(TM) Heavy Duty Detent Pins are shoulder-style alignment pins for applications that do not require positive locking ball. Heavy-duty spring and 2 spring-loaded stainless steel balls provide high pullout force. Available in stainless steel and alloy steel, units range from 3/16-1 in. and 5-25 mm. Ring is included for attachment of optional lanyard.

Read More »
Ball Lock Pins feature clamping length compensation.
Self-Locking Pins

Ball Lock Pins feature clamping length compensation.

Three-Prong, Self-Locking, Ball Lock Pins feature nylon plastic grip handle with heat tolerance up to 80°C, and stainless steel pin, ball, and spring. They provide rapid clamping and simultaneous play-free clamping of thin components. By depressing spring-loaded push button, 2 balls are freed and by releasing push button, balls are locked. Split rings with various lengths of chain are...

Read More »
Ball Lock/Detent Pins offer precision alignment.
Self-Locking Pins

Ball Lock/Detent Pins offer precision alignment.

Marine Ball Lock Pins have 300 Series stainless steel handle and button, and Marine Detent Pins are made of stainless steel. Ball-lock pins come with L, T, button, or ring handles. Single-acting lifting pins are also available, as well as adjustable grip length pins and 3 types of double-acting pins. Ball-lock pins are positive locking, while detent pins have spring-loaded locking balls.

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics