Rope / Cable / Wire Cutters and Cutting Machinery

Thick Cable Cutter helps reduce repetitive motion injuries.
Rope / Cable / Wire Cutters and Cutting Machinery

Thick Cable Cutter helps reduce repetitive motion injuries.

Telco BigFoot(TM) ratcheting cable cutter lets datacom installers cut up to 2700 pair telephone cable or thick Stalpath® type communications cable with minimal stress on their hands and forearms. Use requires contractor to plant unit's over-molded boot on ground and push down on other handle; tool's mechanical leverage cuts cable instead of muscular force. Rounded, hardened steel blades...

Read More »
Multi Material Cutter delivers 600 lb of cutting force.
Rope / Cable / Wire Cutters and Cutting Machinery

Multi Material Cutter delivers 600 lb of cutting force.

Microprocessor-controlled MMC200 cuts round or flat material up to 3.94 in. wide and 5/8 in. thick and can be programmed to cut any length (in. or mm), with 1% or better tolerance. It is also programmable for up to 99 batches and 10 fixed feed rates. MMC200 is rated to cut up to 7,592, 2-in. pieces/hr through makerials such as copper wire and cable, silver solder, power cords, cellophane,...

Read More »
Rope / Cable / Wire Cutters and Cutting Machinery

Rescue Tool targets firefighters, EMTs, and police officers.

Weighing just over 1 lb, No. 88 Rescue Tool is made of drop-forged, 1080 high-carbon steel and combines 6 uses into one device. Tool has beveled plier head with cross-hatched teeth that twist and pull. Tapered pry wedge opens doors and windows, while spanner wrench tightens and loosens hose couplings, and hardened tool steel punch shatters safety glass. Additional features include gas shut-off...

Read More »
Eraser Co. to Display Products at the Assembly Technology Expo: Booth #1402
Rope / Cable / Wire Cutters and Cutting Machinery

Eraser Co. to Display Products at the Assembly Technology Expo: Booth #1402

(Syracuse, NY - August 7, 2008): The Eraser Company, Inc., manufacturers of wire, cable and tube processing equipment, will display their top quality industrial processing equipment at the 2008 Assembly Technology Expo in Rosemont (Chicago), IL from September 23rd through the 25th. This exciting show provides The Eraser Company, Inc. with the perfect venue for hands-on demonstration of their...

Read More »
Rope / Cable / Wire Cutters and Cutting Machinery

Eraser's Model CS800 Wire Cut & Strip

Eraser's Model CS800 Wire Cut & Strip is a fully programmable, fully electric bench top wire cutter and stripper. The unit can process wire from 10AWG - 30AWG and can quickly and precisely cut and partial strip 6,150 pieces per hour at 2.5 lengths (63.5 mmÂ-¸), and 5,700 pieces per hour at 4'' lengths (101.6 mm¸). With programmable batching and ten variable feed rates, the CS800 is...

Read More »
Rope / Cable / Wire Cutters and Cutting Machinery

Eraser's Model HCA20 Wire & Cable Cutter

Erase's Model HCA20 Wire & Cable Cutter is an ideal unit to quickly shear wire, cable or tubing up to 1.25 (31.75mmÂ-¸) in diameter. The unit utilizes dual electrical finger switches to operate the blade via an air cylinder. Model HCA20 incorporates a guillotine style blade to provide clean, square cutting of a variety of different material sizes and configurations. Maximum blade opening...

Read More »
Rope / Cable / Wire Cutters and Cutting Machinery

Wire Cutting/Stripping Machines use sensors for precise setup.

Kappa 350 and Kappa 330 incorporate sensor-based inductive measuring system for automatically detecting wire diameters to simplify cut and strip setup. Kappa 350 carries double-blade design for processing round conductors with cross section of up to 120 mmÂ-² and max outside dia of up to 35 mm. Kappa 330 is designed for processing cables with up to 35 mm² cross section, multi-core...

Read More »
Hand-Held Cable Cutter features ergonomic, molded grips.
Rope / Cable / Wire Cutters and Cutting Machinery

Hand-Held Cable Cutter features ergonomic, molded grips.

Able to cut copper and aluminum cables up to 2/0 AWG, 727M Cable Cutter has molded grips with hard underside for strength and soft, slip-resistant, ergonomic outside for comfort. Grip width optimizes load bearing area to facilitate handling, and hot riveted joint provides smooth opening/closing action. Product uses forged steel blanks that are heat-treated and precision-ground for extended life...

Read More »
Cable/Wire Strippers .
Rope / Cable / Wire Cutters and Cutting Machinery

Cable/Wire Strippers .

Including Models K90-10/2, K90-12/2, and K90-14/2, Bent-Nose NM Romex® Strippers feature tool steel black oxide finish, precision ground stripping holes, shear type cutting blades, and Klein-Kurve® handles. Units eliminate need to angle tool, wire, or hand, enabling precise removal of outer jacket of non-metallic cable. They strip, cut, and loop 10, 12, or 14 AWG solid wire, and cleanly...

Read More »
Insulated Tools are certified to 10,000 Vac/1,500 Vdc.
Rope / Cable / Wire Cutters and Cutting Machinery

Insulated Tools are certified to 10,000 Vac/1,500 Vdc.

Certified according to EN/IEC 60900, ASTM F1505, NFPA-70E, Professional Series Long Life Insulated Tools include wrenches, L-keys, knives, cable cutters, and sockets. Two-color, multilayer insulation allows immediate identification of damages to outer insulation. Flame-retardant insulation is tested for puncture penetration and low-temperature impact resistance as well as adhesion to make sure it...

Read More »

All Topics