Resistivity Meters

Online Process Meters measure pH, ORP, or conductivity.
Resistivity Meters

Online Process Meters measure pH, ORP, or conductivity.

Providing reliable data and control of process fluids, TX10 pH/ORP and CX10 Conductivity transmitters offer simple monitoring, while TX20 pH/ORP and CX20 Conductivity controllers can also be programmed. TX10 measures pH or ORP and temperature, and CX10 measures conductivity, resistivity, and temperature. TX20 and CX20 models additionally include temperature compensation. Powered by 100–240 Vac,...

Read More »
High-Accuracy Handheld LCR Meter has 4-terminal configuration.
Resistivity Meters

High-Accuracy Handheld LCR Meter has 4-terminal configuration.

Providing test frequencies up to 100 kHz, selectable test signal levels, and 4-terminal socket, model 880 measures inductance, capacitance, and resistance withÂ- basic impedance accuracy to 0.1%. Auto ranging function, single-push auto detect mode, as well as data recording, tolerance sorting, and relative mode functions are also standard. DC resistance measuring is also offered, and dual...

Read More »
Li-Ion Powered Digital Ohmmeters test resistance with up to 100 A.
Resistivity Meters

Li-Ion Powered Digital Ohmmeters test resistance with up to 100 A.

Featuring CAT IV 600 Vac/500 Vdc safety rating,Â- DLRO100 allows 0.1 Ã‚ÂµΩ to 1.999 Ω resistance measurement with 0.1 Ã‚ÂµΩ resolution in areas without access to power. Portable unit offers adjustable current ramping, intuitive interface, and 3 test modes. While all 4 models test currents from 10–110 A, mid-range model adds data storage and DualGround...

Read More »
LCR Meters offer multiple measurement, auto-binning functions.
Resistivity Meters

LCR Meters offer multiple measurement, auto-binning functions.

With test frequency rangeÂ- of 10 Hz to 300 kHz and 0.05% basic accuracy, GW Instek LCR-6000 series includes 5 inductance/capacitance/resistance meters that feature 3.5 in. color LCD. Respective display ranges for resistance, inductance, and capacitance are 0.00001Ã‚Â Ω to 99.9999 MΩ, 0.00001 µH to 9999.99 H, and 0.0000 1 pF to 9999.99 mF. Along with PASS/FAIL output, 2U (1/2...

Read More »
An Introduction to Plastic Injection Molding
Sponsored

An Introduction to Plastic Injection Molding

We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.

Read More »
Bench LCR Meter offers sweep and bin sorting functions.
Resistivity Meters

Bench LCR Meter offers sweep and bin sorting functions.

Equipped with USB, GPIB, and LAN interfaces, model 891 can measure inductance, capacitance, and DC resistance with 0.05% best impedance accuracy over fully adjustable test frequency range of 20 Hz to 300 kHz. Selectable test levels includeÂ- 0.5 and 1 Vrms, and such features as 300-point linear and logarithmic sweep function, bin comparator, and remote control interfaces make this unit...

Read More »
VME RTD/Resistance Input Module features 16 independent channels.
Resistivity Meters

VME RTD/Resistance Input Module features 16 independent channels.

AbleÂ- to measure 1 Ω to 3 MΩ, V410 features 16 independent channels configurable for 2-, 3-, and 4-wire resistance measurement. Module is suitable for 100 and 1,000 Ω RTDs, thermistors, and other resistive sensors and can also read cryogenic diodes. LUTs are included for 100 and 1,000 Ω, 385 and 392 platinum RTDs, and any channel may be switched to front-panel D9 test connector for...

Read More »
Precision L/C/R Meter tests electrical components.
Resistivity Meters

Precision L/C/R Meter tests electrical components.

Used for measuring inductance (L), capacitance (C), and resistance (R) of electrical components, Global Specialties LCR-600Â- offers operational frequency range of 100 Hz to 100 kHz, basic measurement accuracy of 0.3%, and measurement voltage fixed at 0.6 V. Open-/short-circuit compensation is standard along with dual LCD and auto range/detect and sorting functions. Uses include...

Read More »
Handheld Tweezer Meters are sized for one-hand operation on SMDs.
Resistivity Meters

Handheld Tweezer Meters are sized for one-hand operation on SMDs.

Offering 1%–3% basic accuracy, LCR-58 Tweezer LCR Meter offers functionality covering resistance, capacitance, inductance, ESR, DCR, and diode test. Standard features include Data Hold function, Auto Select mode, manually, and selectable frequency. ManualÂ- and auto range options are available. Covering resistance, capacitance, continuity, and diode test, PRO-57 Tweezer Digital Multimeter...

Read More »
Resistance Meter supports multiplexer option.
Resistivity Meters

Resistance Meter supports multiplexer option.

Suited for R&D and production lines, RM3545 is used for evaluating and testing coils, inductors, and other electronic components. Multiplexer function, available through optional expansion board, enables automatic 4-terminal measurement of resistance to be performed sequentially at up to 20 locations. Standard features of this resistance tester include contact check functionality to prevent...

Read More »
Resistivity Meters

Electrostatic/Resistance Meter Kit offers industrial uses.

Supplied in portable, all-in-one carrying case, Electrostatic Discharge Audit KitÂ-  (Model 511/1501) includes Trek Ionizer Kit (Model 511 Electrostatic Field Meter with charger and charge plate) and Model 1501 Surface Resistance Meter. Technical capabilities provided by kit help operators and auditors increase efficiency on production floor. Areas of use include manufacturing environments...

Read More »

All Topics