Resins

Resins

Injection Molding Grade offers high heat resistance.

TOPAS® 6013M-07 cyclic olefin copolymer (COC) grade features heat distortion temperature of 130°C. Compliant with USP Class VI requirements for medical use, it also meets ISO 10993 requirements for biocompatibility, as well as U.S. FDA food-contact regulations. It features clarity for mono- and multi-layer barrier bottles for medical and food industries along with non-barrier uses...

Read More »
Resins

Solvay Advanced Polymers' Ixef® Polyarylamide Wins CARB & EPA Approval for Small-Engine Fuel Tanks

ALPHARETTA, Ga., October 5, 2010 - Solvay Advanced Polymers' reformulated Ixef® BXT 2000-0203 polyarylamide (PARA) blow molding resin has been approved by the California Air Resources Board (CARB) and the U.S. Environmental Protection Agency (EPA) as a barrier solution for three-layer fuel tank systems for lawnmowers, snow blowers, weed trimmers, generators, and other small off-road equipment....

Read More »
Resins

Stereolithography Resin approaches thermoplastic performance.

Able to produce parts that demonstrate stiffness and toughness, Somos® NeXt provides look and feel of thermoplastic with detail, dimensional accuracy, and aesthetics offered by stereolithography. Product is suited for functional testing applications as well as for producing functional end-use performance prototypes, including snap-fit designs, impellers, duct work, connectors, electronic...

Read More »
Miscellaneous Compounds

Polyurethane Potting Compound protects electronic components.

Potting, encapsulating, and casting resin 20-2121 consists of 2-component, room temperature curing system that will cushion sensitive electronic components. With toxicity level that reduces employee exposure to dangerous chemicals, moisture-resistant compound imparts minimal stress on components during cure or thermal cycling. Characteristics include 2,000 psi tensile strength, 80 Shore A...

Read More »
Resins

Silicone Flake Resin optimizes performance of cookware coatings.

Consisting of 100% silicone, hydroxyl-functional solid flake resin, Dow Corning® 255 optimizes heat stability and weatherability when used as binder in powder coatings. Product possesses high glass transition temperature of 56°C and residual silicon dioxide content of 62%. Compliant with FDA 21 CFR 175.300, resin also exhibits hot hardness, making it suitable for high-temperature...

Read More »
Resins

Carboline Releases a New 600 Series

This technology utilizes phenalkamine-cured epoxy resins. The primary advantages are exceptional low temperature cure response, excellent wetting properties, fast recoatability, and moisture tolerance during application and cure. While this technology has been used in Europe for a number of years, more recent advances have made it even more attractive in that we can now achieve higher solids and...

Read More »
Cray Valley Resins and HFG Technology Make Electric Buses Lighter
Resins

Cray Valley Resins and HFG Technology Make Electric Buses Lighter

Electric vehicles are intensively investigated all around the world to lower big city air pollution. To this purpose, the Korean company HFG developed an electric bus in cooperation with Hyundai Heavy Industries Co., at the request of Seoul city. The first electric non-step bus starts to run the 24th of June 2010 and 15 buses are expected to run in November 2010. The battery system offers to run...

Read More »
Resins

SABIC Innovative Plastics' Flexible Noryl* Resin Gives Chiangyu's DC and Data Cables Customized Aesthetics, Eco Edge, Superior Performance

PITTSFIELD, Mass. - SABIC Innovative Plastics today announced that Chiangyu Electric, a leading Chinese wire and cable manufacturer and long-term customer, is helping to lead the rapid growth of Flexible Noryl* resin, a polyvinyl chloride (PVC) and halogen-free, flame retardant alternative for wire cables into high-end direct current (DC) charger and data cables. Producing ultra-white,...

Read More »
QinetiQ's Zephyr Solar-Powered UAV Shatters Flight Endurance Record Using Advanced Composites Group's MTM®45-1 Prepregs
Resins

QinetiQ's Zephyr Solar-Powered UAV Shatters Flight Endurance Record Using Advanced Composites Group's MTM®45-1 Prepregs

MTM®45-1 epoxy resin based carbon fibre prepregs manufactured by Advanced Composites Group (ACG), a member of Umeco Composites Structural Materials (UCSM) - a Division of Umeco plc, have been used in a number of formats by QinetiQ to manufacture the wing and fuselage frames for its record-breaking Zephyr solar-powered unmanned aerial vehicle (UAV). Hand launched by a small team, QinetiQ's...

Read More »
Resins

Pinnacle Polymers(TM) Achieves Peak Brightness and Improved Aesthetics in New Polypropylene Grades Featuring Milliken's Millad® NX8000 Clarifier

SPARTANBURG, S.C. - Pinnacle Polymers(TM) LLC, a major polypropylene (PP) manufacturer based in Ridgefield, Conn., has reached new heights of aesthetics and quality by upgrading to Millad® NX8000 technology from Milliken Chemical, a division of Milliken & Company. Pinnacle's two new PP3(TM) random copolymer grades offer customers superior aesthetics at an affordable price point. Besides...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers