Resins

Paint Additives

Dow Expands Boundaries with Customers at 2016 American Coatings SHOW

Industry experts from Dow showcase new rheology modifiers and other innovations developed to solve industry challenges PHILADELPHIA – The Dow Chemical Company (NYSE: DOW) is answering the dynamic needs of coatings formulators, manufacturers, regulators and applicators with the latest innovations to help solve their most critical challenges at the 2016 American Coatings SHOW April 12-14, 2016 at...

Read More »
LUMIFLON® FEVE Improves Durability and Weatherability of San Diego Airport, Skydance Bridge and Other Iconic Structures
Resins

LUMIFLON® FEVE Improves Durability and Weatherability of San Diego Airport, Skydance Bridge and Other Iconic Structures

AGC Chemicals Americas to Highlight Notable LUMIFLON-based Coatings Applications at American Coatings Show EXTON, Pa.,Â- – AGC Chemicals Americas Inc. will feature LUMIFLON® fluoroethylene vinyl ether (FEVE) resins for industrial and architectural applications at the 2016 American Coatings Show. Topcoats formulated with LUMIFLON resins are ultra-weatherable, offering outstanding...

Read More »
3D Printing Resins come in standard and rubber-like formulations.
Resins

3D Printing Resins come in standard and rubber-like formulations.

Supplied in 12.35 oz bottles, ImageCure™ PRH35-ST2 and PRR35-OP are resins intended for use with monoFab™ ARM-10 3D printer. PRH35-ST2, formulated for minimal odor emission in liquid form, allows accelerated printing and facilitated filing/sanding of finished models. Formulated to stretch and compresses like rubber upon curing, PRR35-OP can be used to produce diverse variety of parts and...

Read More »
Resins

ETFE Adhesive chemically bonds to engineered plastics.

Able to bond to dissimilar materials, such as polyamides, polyethylenes, and metals, Fluon® ETFE LH-8000 is suited for producing multilayer structures in one-step process without surface treatment. Chemical-resistant product has ultra-low melting point of 180–190°C, and offers wide processing temperature range between melting point and onset of degradation (350°C). Typical...

Read More »
Dymax SpeedMask® Masking Resins to be Showcased at MRO Americas
Masks and Masking

Dymax SpeedMask® Masking Resins to be Showcased at MRO Americas

Torrington, Connecticut – Dymax Corporation will showcase SpeedMask® line of masking resins in Booth #4211 at MRO Americas, scheduled to take place April 5-7, 2016 at the Kay Bailey Hutchison Convention Center in Dallas, Texas.Â-  SpeedMask products replace tapes, waxes, lacquers and fixtures while offering reliable protection against most metal-finishing process environments....

Read More »
Resins

Anti-Slip Paints withstand tough industrial applications.

By providing textured coating, Good Grip® Anti-Slip Paints eliminate dangerous, slick surfaces almost anywhere in just one coat. Epoxy resin formula adheres to wood, fiberglass, cement, and most materials. Paints dry tack-free in 60 minutes, are fully cured in 24 hours, and are resistant to oil, gas, and most chemicals. Meeting OSHA recommended static coefficient of friction, paints are...

Read More »
Resins

Silicone Resin suits room temperature cure, high-temp coatings.

Dow Corning® 2405 Resin helps formulators overcome such limitations as brittleness, poor impact resistance, and film-building constraintsÂ- associated with resins used to formulate high-temperature-resistant, room-temperature-curing coatings. When catalyzed by titanium compounds, product cures within 60 min at ambient temperature to form medium-hard coating. This methyl methoxy resin,...

Read More »
Epoxy Potting Compound resists thermal shock and cycling.
Encapsulation Equipment

Epoxy Potting Compound resists thermal shock and cycling.

PassingÂ- Navy Hex Bar Test, MIL-I-16923C, which consists of 10 cycles from -55 to +155°C, two-part epoxy resin 20-3301 protects electronic assemblies from thermal cycling and shock. Low viscosity epoxy flows quickly around components, giving users working time of 4–6 hr. Product is typically cured at 80°C for 1–2 hr, but post cure of 150°C for 3 hr will optimize...

Read More »
Protect Turbine Components from Flame Spray Processes with SpeedMask® 718 Masking Resin
Resins

Protect Turbine Components from Flame Spray Processes with SpeedMask® 718 Masking Resin

Torrington, Connecticut – Dymax Corporation's SpeedMask® 718 is formulated to provide excellent surface and cavity protection during APS and HVOF coating processes, aiding in the manufacturing, overhaul, repair, and rework of turbine engine blades, vanes, and other turbine components.Â-  The masking resin cures quickly when exposed to UV/Visible light and forms a hard, durable,...

Read More »
Fluoropolymers Enable Critical Components of Chemical Processing Plants Withstand the Harshest Conditions
Resins

Fluoropolymers Enable Critical Components of Chemical Processing Plants Withstand the Harshest Conditions

AGC to feature fluorochemical solutions at 2015 Chem Show Booth #327 EXTON, Pa. – Fluoropolymer resins, compounds and fluoroelastomers from AGC Chemicals Americas Inc. are ideal for protecting components and equipment used to keep chemical processing plants running efficiently. AFLAS®Â-  Fluoroelastomers Alternating copolymers of tetrafluoroethylene and propylene, AFLAS imparts...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers