Remote Terminal Units (RTU)

Semaphore SCADA RTU Products Will Be on Exhibit at AWWA ACE09
Monitoring Systems

Semaphore SCADA RTU Products Will Be on Exhibit at AWWA ACE09

NASHUA, NH--( May 26, 2009) - Semaphore, a CSE Global company, announces that its SCADA System products will be on exhibit at the American Water Works Annual Conference & Exposition (ACE09) which will be held at the San Diego Convention Center, San Diego, California, June 14 - 18. Semaphore's exhibit, at booth 1304, will feature the new T-BOX WM Wireless Monitor as well as the complete T-BOX RTU...

Read More »
Remote Access/Monitoring System uses cellular networks.
Remote Terminal Units (RTU)

Remote Access/Monitoring System uses cellular networks.

R.A.M.(Remote Access and Monitoring) unit allows data logging and SCADA operations to be monitored/controlled from remote locations anywhere via existing cellular networks. It provides secure cellular data connectivity, programmable RTU functionality, and includes Open Source Linux OS along with application tools for alarming, data logging, and programmable control. With 26 I/O points and 5...

Read More »
Remote Terminal Units feature ladder logic capability.
Remote Terminal Units (RTU)

Remote Terminal Units feature ladder logic capability.

Opening up high-tech communications and SCADA to remote locations, Kingfisher LP-2 and LP-3 are each packaged in 2-part plastic enclosure that houses electronics and communication interfaces. Model LP-3 adds analog output and second network port option, which supports cellular and PSTN modems and UHF radios. With communication, scanning, and sleeping modes, RTUs make solar power feasible....

Read More »
Remote Terminal Units (RTU)

Remote Terminal Units feature Secure DNP3 Authentication.

Featuring redundant configurations and open programming that is compliant with IEC 61121-3 and IEC 61499, Kingfisher Plus offers expansion up to 1,000 I/O points, while G30 models target small SCADA system applications requiring up to 32 I/O points. Secure DNP3 Authentication is compliant with extension that mandates authentication of master devices through use of 1-way cryptographic hash...

Read More »
Remote Terminal Units (RTU)

Alarm Remote includes intuitive web interface.

Featuring 16 discrete alarm inputs, 2 control relays, and up to 8 analog inputs, NetGuardian 216 G3 enables user to monitor temperature, humidity, battery voltages, and fuel levels from single RTU. Web browser interface offers intuitive monitoring for technicians without extensive training. Alarm statuses update automatically, and wizards guide user through setup process. One wizard enables user...

Read More »
Remote Terminal Units (RTU)

Remote Terminal Unit has Ethernet, serial, fiber connectors.

Incorporating 1000BaseT (Gigabit) SFP interface, NetGuardian 216F collects and reports alarms from outdoor enclosures. It supports 16 discrete alarms and 8 analog inputs and offers built-in Web interface for remote monitoring and configuration. Included 7-port Ethernet switch can extend LAN to 7 external devices, and alarm reporting is done via SNMP to multiple masters. Run on -48 V battery...

Read More »
Semaphore Adds 1-Wire Interface to SCADA RTU Product Line
Communication Networks

Semaphore Adds 1-Wire Interface to SCADA RTU Product Line

The combination of this Semaphore T-BOX RTU with 1-Wire devices is particularly applicable to infrastructure management and mobile asset management. NASHUA, NH -(September 24, 2008) - Semaphore, a CSE Global company, has introduced a 1-Wire® interface for its T-BOX line of SCADA system products. This interface is compatible with a T-BOX MS Modular System, when equipped with a 32-bit CPU....

Read More »
RTU Devices enable Modbus control over Ethernet.
Modules

RTU Devices enable Modbus control over Ethernet.

EDAM-9000 range is based on common 10/100 Ethernet networking standards and supports Modus/TCP protocol as well as UDP protocol over Ethernet networking. There are 6 models in range covering voltage, thermocouple and PRT analogue inputs, digital inputs, pulse counting and transistor outputs. All have 10-30 Vdc power supply range, full opto-isolation, and are housed in DIN rail mount enclosures.

Read More »
Remote Terminal Units (RTU)

RTU and Datalogger delivers real-time information anywhere.

Combining remote terminal unit, datalogger, and telemetry interface, IPm2m® features variety of communication ports, including Ethernet, RS232, RS485, and USB. Each port supports SIXNET and Modbus protocol along with DNP3 slave. Etherbus® PoE supply feature keeps module communicating and powering critical instrumentation during power failure. With means to connect remotely,...

Read More »
Miscellaneous Controllers

MODBUS RTU Master also acts as distributed I/O system.

Functioning as MODBUS RTU (RS-485) Master, microNCS® can send up to hundreds of process signals between field or factory floor and control system. One or both MODBUS RTU ports can be configured to poll as many as 32 or 64 other MODBUS RTU slaves, respectively. Product operates as real-time signal gateway by concentrating data from 4 or 8 fully isolated analog inputs and 4 discrete inputs...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics