Proximity Sensors

Optical Proximity Switches use laser technology.
Proximity Sensors

Optical Proximity Switches use laser technology.

With one switching output, L20 laser reflex sensor can be used as diffuse sensor with background suppression for operating range up to 60-110 mm. As retroreflective sensor, range is 0.1-1 m. Laser contrast sensor, C20, detects printed labels at ranges to 150 mm using light focus of 0.5 mm. With measuring bandwidth to 10 KHz, L50 laser switch is available in versions with 4-20 mA analog output or...

Read More »
Inductive Proximity Switches have 4x operating distance.
Proximity Sensors

Inductive Proximity Switches have 4x operating distance.

Utilizing CONDIST® technology, Series 520 has operating temperature range of -13 to +158°F and is suited for use on difficult-to-detect targets such as narrow objects, non-ferrous metals, and wires. Quasi-embeddable series, offered in M8 and M12 sizes, incorporates short-circuit protection, EMC, and polarity-reversal protection. Models are available as NO and NC types with PNP or NPN...

Read More »
Inductive Proximity Switches have 0-4 mm sensing range.
Proximity Sensors

Inductive Proximity Switches have 0-4 mm sensing range.

Offering temperature stability from -13 to +158°F, size M8 analog sensors provide virtually unlimited resolution due to elimination of intermediate digitization. They utilize non-linearized transfer function and has output voltage ranges of 0-5 or 0-10 V. Also offered in M12, M18, and M30 sizes, applications include regulated approach to end positions, realization of several switch points...

Read More »
Inductive Proximity Sensors have sensing range to 22 mm.
Proximity Sensors

Inductive Proximity Sensors have sensing range to 22 mm.

Offered in 2- and 3-wire versions, M12, M18, and M30 have 10-40 Vdc supply range and offer built-in reverse polarity, short-circuit, and transient voltage protection. Outputs are transistor types, with NPN and PNP versions available. Available with cable or M12 quick-disconnect plug, sensors have nickel-plated brass housings. Flush and non-flush mount sensing ranges for M12, M18, and M30 are 4...

Read More »
Inductive Proximity Sensors offer sensing range of 6-40 mm.
Proximity Sensors

Inductive Proximity Sensors offer sensing range of 6-40 mm.

Extended Range X Series is IP67-rated with nickel-plated brass housing and Crastin sensing face for operation in harsh environments. Featuring 3-wire PNP output and micro-quick disconnects, cylindrical units are non-flush mountable. Sensors are suited for applications where target slop places sensor in danger of impact damage, target movement necessitates wide sensing band, or to gain additional...

Read More »
Proximity Sensors

Sortation Sensor reads packages at 650 fpm.

Flat Surface Recognition Sensor, Model 600 passes dimensional information to sorting device so packages can be sorted by size. It can activate switching output to sorter that indicates side-by-side packages, which are then re-circulated to ensure proper tracking. Integrated into existing conveyor systems, sensor detects presence, width, length, product spacing, and location of objects moving on...

Read More »
Thru-Beam Sensors withstand high-impact applications.
Proximity Sensors

Thru-Beam Sensors withstand high-impact applications.

Self-contained BWL L-shaped Sensors have infrared emitter in zinc-plated steel housing that can resist multiple impacts without loss of function. IR light beam cuts through heavily contaminated air with ample reserve capacity. Three sizes are available, with optical axes ranging from 22-42 mm. Sealed to IP67, one-piece plug-and-play sensors feature pre-aligned optics. Maximum response time is 0.5...

Read More »
Area Sensors detect objects in non-safety applications.
Proximity Sensors

Area Sensors detect objects in non-safety applications.

Series AS6000 features 15 m range, response time of 24 ms, and 31 x 32 mm cross section to detect objects as small as 30 mm in diameter. Offering NPN or PNP outputs, sensors are capable of switching high current loads to 250 mAdc and can interface to almost any control system. Industry-standard M12 connectors facilitate installation. Sensors are suited for factory automation applications...

Read More »
Duct Smoke Sensors target HVAC applications.
Proximity Sensors

Duct Smoke Sensors target HVAC applications.

Series ADP Low-Flow Photoelectronic Sensors detect smoke at air-speed velocities of 110-4,000 fpm, providing assistance in difficult smoke detection environments. Analog addressable units shut down fans, blowers, and air conditioning systems, preventing spread of toxic smoke and fire gases. Any sensitivity in sensors caused by dirt, temperature, or humidity is reported to panel, allowing...

Read More »
Proximity Sensors

Muting System facilitates entrance/exit guarding.

Integrated into any entrance or exit conveyor, IMS Safety Muting System distinguishes between material and people entering dangerous area. Differentiation is achieved by arranging muting sensors such that only particular combination of signals triggered by incoming material allows system to enter safety-muted state. Immediate machine stop is triggered if proper sensor sequence or combination does...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics