New Capacitive Proximity Sensors Features 2 m PVC Cable or M12-plug
CA18CA and CA30CA series is housed in durable AISI316L stainless steel housings or PTFE Teflon housings for high chemical resistance. Available with AND, OR, XOR and Gated SR/FF logic functions. Used in markets such as plastic and rubber, HVAC, agriculture and food and beverage.
Read More »
New Capacitive Proximity Sensors Provide Programmable Sensing Distance and Hysteresis
Housed in AISI316L stainless steel housings or PTFE Teflon housings for high chemical resistance. Offer logic, timer, logging functions and sensing mode with Integrated IO-Link communications. Feature configurable output/input: NPN, PNP, Push-Pull and external input.
Read More »
New Inductive Proximity Sensors with Low Operating Current and Voltage
MIROW BRAND operate with a supply voltage as low as +2.3 V with a current draw of only 5 uA. Allows sensor operation below the energy and voltage level required to cause a spark or ignitions in most explosive environments. Permit simultaneous use of both a low-voltage and a limited-energy system which eases the construction of intrinsically safe circuits.
Read More »
New Photoelectric Laser Sensors Come with Temperature Alarms and Logging Functions
Feature background suppression based on the Time of Flight (ToF) sensing principle. Offer operating temperature ranging from -25°C to +50°C (-13° to +122°F) and can be used in an IO-Link network or standard non IO-Link systems. Available in either IP67 plastic or IP69K stainless steel housings with two separate switching signal channels (SSC).
Read More »
Why Choose a Concept-to-Completion Sheet Metal Fabricator
Concept-to-Completion provides you with the services and guidance you need to get your metal fabrication project done better, faster, and more cost effectively, all in one place.
Read More »
New E2EW Series Proximity Sensors are Ideal for Automotive Welding Applications
Feature increased sensing distances that enable common design for position detection in mixed production lines containing both iron and aluminum components. Supports IO-Link that enables gathering of data on the detection level and temperature changes of proximity sensors from a single location in real time. Can withstand harsh conditions with fluororesin coating that provides increased spatter...
Read More »
New 2-Wire Inductive Proximity Sensors with Low Minimum Operating Voltage of +2.3 V
M18M2 is compatible with most types of computers for portable robotics, motor controls and automation. Utilizes Mirow Brand Sensors technology to operate at low off-state leakage current level of 3 µA (typ.) and the low "on" voltage level of +2.3 V. ideal for low current portable/battery operated applications.
Read More »
New Photoelectric Sensors Compatible with IO-link open-standard Protocol
Includes diffuse with background suppression, retroreflective, retroreflective for transparent objects and through-beam models. Sensing ranges vary from 1200mm for background suppression sensors to 20m for through-beam models. Provides long-range and small spot diameter, simple potentiometer sensitivity adjustment and visible red-light emission for easy targeting set-up.
Read More »
New Wafer Mapping Sensor Based on Photoelectric Micromote Technology
Features controlled and focused light spot, allowing it to detect wafers even just a few μm thick with high precision. Utilizes high precise photoelectric sensor for fast and reliable detection of semiconductor wafers and slotting errors in FOUPS. Ideal for life science, food and beverage applications.
Read More »
New VCNL36821S and VCNL36826S Proximity Sensors are RoHS-Compliant and Halogen-Free
Features power consumption down to 6 µA in 2.55 mm. x 2.05 mm. x 1.0 mm. SMD Package. Offers temperature compensation from -40 °C to +85 °C, and moisture sensitivity level (MSL) of 3. Supports I²C bus communication interface, while programmable interrupt function allows designers to specify high and low thresholds to reduce continuous communication with microcontroller.
Read More »
New Inductive Proximity Sensors Available with 2m Pigtail Cable
Available in 8mm, 12mm, 18mm and 30mm cylindrical sizes. 8mm analog inductive proximity sensors detect the presence of ferrous metal objects at distance up to 4mm. 12mm, 18mm and 30mm analog inductive proximity sensors detect the distance of ferrous metal objects up to 6, 10 and 20mm respectively.
Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.
Read More »
