Pressure Regulators

Pressure Regulators

Marotta Controls on Newly Commissioned George H. W. Bush, CVN-77

Marotta Controls is proud to announce that its valves and manifolds have been designed into various systems on the newly commissioned George H. W. Bush, the last of the Nimitz-class carriers. Montville, NJ - October 12, 2006 -- Marotta Controls is proud to announce that its valves and manifolds have been designed into various systems on the newly commissioned George H. W. Bush, the last of the...

Read More »
Gas Regulator eliminates surge, lowers shielding gas use.
Pressure Regulators

Gas Regulator eliminates surge, lowers shielding gas use.

Designed for high-pressure/liquid cylinder or pipeline use, tamper-proof Gas-Saver regulator lets user remove key after appropriate flow rate is set to control process quality. Non-compensated flowmeter accurately displays gas flow rate, even when coupled regulator is adjusted to as low as 3 or 4 psi. This minimizes static pressure buildup in hose that would otherwise lead to surges, reducing...

Read More »
Steam Pressure Regulator requires no external power signal.
Pressure Regulators

Steam Pressure Regulator requires no external power signal.

Offered in cast iron or cast steel, in 3/8 to 12 in. sizes, for pressures to 600 psig and temperatures to 750°F, Type ED pilot-operated pressure regulator controls operations within ±1 psig of set pressure. Construction features include balancing to accommodate high turn down, liquid, and low differential service. Self contained, spring operated, side, or integrally mounted pressure, air,...

Read More »
Filters, Regulators, Lubricators feature modular design.
Pressure Regulators

Filters, Regulators, Lubricators feature modular design.

Designed to meet or exceed ISO standards, MD4(TM) Series FRL's feature modular clamps with integral mounting brackets. Units have tamper-resistant, removable knobs for sight-feed lubricators and removable regulator adjustment key. General-purpose plastic bowl with metal shatterguard offers coalescing and adsorbing filter options. Cap color options besides standard gold include red, blue, yellow,...

Read More »
Flowmeter Regulator suits MIG and TIG welding applications.
Pressure Regulators

Flowmeter Regulator suits MIG and TIG welding applications.

Featuring 2-stage, anti-surge design, Optimizer(TM) Flowmeter Regulator helps prevent gas flow surges that normally occur when welding operator activates MIG gun or TIG torch. High-flow capacity offers delivery range up to 70 scfh and is suited for use with either straight Argon shielding gas or Argon/CO2 mixture. Designed with CGA 580 inlet connection and 5/8 in., 18 RH internal outlet...

Read More »
Pressure Regulator withstands harsh environments.
Pressure Regulators

Pressure Regulator withstands harsh environments.

Housed in NEMA 4X enclosure, Type 900X current-to-pressure (I/P) and voltage-to-pressure (E/P) transducer is available with zero-based units ranging from 0-7.5 to 0-60 psi outputs. Output pressures of up to 100 psig can be direct/reverse acting, full/split rangable, and do not need pre-regulation. Compliant with ATEX directive 94/9/EC, unit provides accuracy of ±0.1% of span. Modular design...

Read More »
New Smith Equipment Products to be Featured at 2006 Fabtech International/AWS Welding Show
Pressure Regulators

New Smith Equipment Products to be Featured at 2006 Fabtech International/AWS Welding Show

WATERTOWN, SD., August 2, 2006-Smith Equipment will showcase its latest products at the Fabtech International/AWS Welding Show in Atlanta, October 31 to November 2, in Booth 24040. New products on display include the company's Optimizer(TM) Anti-Surge Flowmeter Regulators, Thermite Heating Tips and Silverline Specialty Gas Regulators. Also to be showcased are Smith's Gas Axe cutting torches, Gas...

Read More »
Pressure Regulator incorporates 10-32 ports.
Pressure Regulators

Pressure Regulator incorporates 10-32 ports.

Weighing 23 g in aluminum and 50 g in brass and SS, Model PRD3-ANB-C-DEF 2-stage, non-relieving diaphragm pressure regulator controls output pressures from 0-20 psig and is suited for low pressure regulation such as Â-½ psig. Device features low-friction sensor and valve arrangement for regulation and spring arrangement for handling range of regulated output pressures. With maximum rated...

Read More »
Diaphragm Pressure Regulator incorporates 10-32 ports.
Pressure Regulators

Diaphragm Pressure Regulator incorporates 10-32 ports.

With max inlet supply pressure of 500 psig, 2-stage, non-relieving Model PRD3-ANB-C-DEF controls output pressure from 0-20 psig. Featuring low-friction sensor and proprietary valve arrangement, unit maintains constant output pressure despite input pressure swings. Regulator weighs approximately 23 g in aluminum, and 50 g in brass and stainless steel. Applications include instrumentation, portable...

Read More »
Pressure Regulators

VICTOR Launches New Three-Tier Brand Strategy and Product Mix

All New Outfits Match Application and Price Requirements St. Louis - In a bold effort to meet the evolving demands of the cutting and welding marketplace, Victor has launched its new three-tier brand strategy and product line blend. The line is branded as Victor Professional, Victor CutSkill and Victor Firepower. Each tier carries a specific apparatus and set of components designed to meet the...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics