Pipe Clamps

Standard- and Heavy-Duty Clamps come in steel and stainless.
Pipe Clamps

Standard- and Heavy-Duty Clamps come in steel and stainless.

Featuring vibration-dampening 4-rib design that prevents loosening of joints and welds, Standard-Duty Clamps are suited for average loading and light vibration applications, while Heavy-Duty Clamps are intended for heavier pipe and higher vibration applications. Standard models are available for pipe sizes up to 2 in. OD. Offered in weld-plate and channel-mounting designs, heavy-duty versions...

Read More »
Pipe Clamps are available in standard/heavy duty styles.
Pipe Clamps

Pipe Clamps are available in standard/heavy duty styles.

Standard-Duty Pipe Clamps, available for pipe sizes up to 2 in. OD, are suited for machine/tool applications and for instrumentation piping. Available for pipes with up to 8 in. OD, and in weld-plate and channel-mounting designs, Heavy-Duty Pipe Clamps are used for trench piping layouts exposed to various weather conditions. Both styles have 4-rib design, prevent vibration transmission...

Read More »
Clamps provide 2,100 lb of clamping force.
Pipe Clamps

Clamps provide 2,100 lb of clamping force.

Specifically designed to fit Bluco's Modular Fixturing Tables, Wolverine Clamps are rated for over 100,000 cycles and are available in horizontal and vertical styles for D16 and D28 fixturing systems. Corrosion-resistant units lock quickly, positively release instantly, and allow maximum clearance in open position. Drop-forged body components, machine-reamed bearing surfaces, and hardened steel...

Read More »
Hinge Clamps provide maximum operating pressure of 3,600 psi.
Pipe Clamps

Hinge Clamps provide maximum operating pressure of 3,600 psi.

Hinge Clamps are designed for 500,000 cycles, and have swivel contact bolt and reinforced hinge mechanism. Suited for clamping in narrow recesses, unit has linkage to move clamping arm forward as it pivots into clamping position, allowing clamp to exert nearly perfectly vertical clamping force. Designed for manifold mounting, product is available with clamping forces from 500-3,200 lb, with...

Read More »
Handle-It® Down Guard Adapter
Pipe Clamps

Handle-It® Down Guard Adapter

The down guard adapter allows guard rail to sit at floor level for ultimate protection against accidental forklift damage. The down guard adapter is attached to the bottom of the column which allows the guard rail to be placed at floor level. Using the down guard adapter, the guard rail would protect equipment, materials, or any other product located at floor level. The included safety block is...

Read More »
Pipe Clamps

DE-STA-CO to Feature CAMCO' Ring lndex Drives at ATExpo

Auburn Hills, Michigan, September 23, 2008 - DE-STA-CO will showcase a variety of workholding and automation products at the annual Assembly Technology Expo. Headlined by products from its CAMCOn line, the industry leader in material handling solutions will be located in booth 51 7 at the Donald E. Stephens Convention Center in Rosemont, Illinois from September 23 - 25. DE-STA-CO's family of...

Read More »
Adjustable Pipe Bracket and Clamping System Use TPE Compound to Help Arrest Noise
Pipe Clamps

Adjustable Pipe Bracket and Clamping System Use TPE Compound to Help Arrest Noise

WINONA, MINNESOTA, USA -- (August 26, 2008) -- When Sioux Chief Manufacturing wanted to develop a series of universal pipe clamps with noise absorbing blocks to reduce noise transfer caused by loose pipes, it chose a thermoplastic elastomer (TPE) from specialty compounder RTP Company for a bridge insert that fits over a nylon plastic base. The Touchdown" clamps are an integral component of the...

Read More »
Hose/Tubing Clamps suit space- and weight-restricted areas.
Pipe Clamps

Hose/Tubing Clamps suit space- and weight-restricted areas.

Resistant to effects of UV, ozone, and weather, LBBU Series facilitates hanging of pipe, hose, cable, and tubing. Clamp bodies are made of thermoplastic elastomer (87 Shore-A), which helps reduce vibration and noise. Single- and double-line clamp styles are available in sizes from 6-18 mm dia for applications where space is limited and noise must be minimized, such as hydraulics/pneumatics,...

Read More »
Pipe Clamps

Piping Technology & Products, Inc. Designed and Fabricated 97" Diameter, 3-Piece Clamps for a Refinery in Ponco City

Piping Technology & Products, Inc. fabricated 3-piece pipe clamps used to support 97 diameter stainless steel ductwork. This ductwork is being added to a refinery for an expansion project in Ponco City, Oklahoma. Each section of the clamp assembly is formed from a continuous plate and gussets are added at each of the bolt locations for increased strength and rigidity. Due to the ducts having a...

Read More »
Pipe Clamps

CS Unitec's Automatic Feed Clamp System Simplifies Cutting of Pipe with Portable Pneumatic Hacksaw

A portable Pipe Clamp System with automatic feed is available from CS Unitec for use with the company's Portable Pneumatic Hacksaw. This System easily attaches to the Hacksaw and the pipe. It operates off of the same 90 psi air supply as the saw. This self-feeding device saves time and money by facilitating automatic cutting of pipe up to 30 in diameter. It eliminates manual cutting and makes the...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers