TiAIN Coating suits turning and milling tools.
Coatings

TiAIN Coating suits turning and milling tools.

BALINIT® ENDURA offers optimization potential with turning and milling tools in highly abrasive applications. High metal removal rates can be realized by cutting with high speed and feed rates simultaneously. Coating provides protection against abrasive wear. Ratio of residual compressive stress to hardness stabilizes tool cutting edge under high loads, and increased thickness reduces heat...

Read More »
Paint glows in the dark for 4 hours.
Paints

Paint glows in the dark for 4 hours.

Fast Glo Acrylic Safety Marking Paint is single component acrylic with phosphorescent luminescent pigment that enables paint to glow yellow/green in dark for up to 4 hours. Paint is for marking aisle ways, emergency routes, boundaries, and stairways to identify safe passageways in event of power outage or failure of back-up power systems. It can be applied by brush, roll, or spray and comes in...

Read More »
Caps are vented to relieve pressure.
Protective Caps

Caps are vented to relieve pressure.

Vented Caps allow air to be released from inside cap, relieving pressure and prohibiting cap from popping off. Design styles feature S-caps (short caps) and EZ Tab caps. Dip-molded process allows for creation of custom designs with choice of colors, materials, diameters, and lengths. Design yields relief from high temperatures. Products are suited for masking applications, automotive and medical...

Read More »
Rust Inhibitor Coating is suited for steel stamps.
Coatings

Rust Inhibitor Coating is suited for steel stamps.

ACC(TM) Auto Clean, chemically applied electroless nickel coating, provides lubricity of Teflon® to eliminate effects of rust on stamp characters and stamp retainers. Product also aids in preventing dirt from compacting into individual stamp characters, thereby avoiding character blow out and deterioration of stamp characters that might lead to chipping and loss of stamp integrity.

Read More »
Low-VOC Coatings provide corrosion control.
Coatings

Low-VOC Coatings provide corrosion control.

ControlTech(TM) coatings include 26 low-VOC coatings engineered for use on concrete or steel tanks, floors, drains, clarifiers, sumps, and slabs. Products consists of thin film and medium film systems; laminates such as single, double, and flexible basecoat systems; mortar and mortar laminate systems; and EnviroLastic Polyurea coating systems for potable water, concrete, steel, geotextile and...

Read More »
Rust-Encapsulating Finish needs no metal primer.
Paints

Rust-Encapsulating Finish needs no metal primer.

Hammerite® RustCap(TM) can be painted directly over firm, rusty surfaces such as iron and steel, providing decorative finish that is resistant to corrosion and damaging effects of moisture and severe weather. As coating dries, heat-hardened glass flakes interlock with resins to form surface of protective resin and glass particles, inhibiting growth or continuation of rust. Product dries to...

Read More »
Floor Care System eliminates use of hazardous chemicals.
Sealants

Floor Care System eliminates use of hazardous chemicals.

EnviroStar Green FloorCare System meets or exceeds domestic and international standards. Five products work together to deliver wet-look shine and safety, including EnviroStar Green Floor Coating, Sealer, All-Purpose Cleaner, Maintainer, and Stripper. Products do not have ethylene glycol based solvents, bioaccumulative fluorocarbon surfactants, alkyl phenol ethoxylate surfactants,...

Read More »
Coatings

Pretreatment Agent fights corrosion.

Gardobond A 4920 liquid pretreatment replaces conventional treatments on steel and offers reduced operating temperatures as low as 80°F. It provides salt-spray protection with wide variety of paints, resulting in longer life for finished part. Agent is non-toxic, contains no heavy metals, and is environmentally compliant.

Read More »
Mold Release/Conditioner has zero VOC content.
Miscellaneous Compounds

Mold Release/Conditioner has zero VOC content.

Non-carcinogenic, odorless SafeSlick(TM) blended boron compound is non-toxic and non-flammable and complies with SPI's environmental, health, and safety policy. Used as release agent in high-temperature/pressure applications, it is non-silicone, non-oil, non-conductive, and non-reactive. Product can applied via spray system, brush, wipe, or sponge, drying to 2-10 micron, semi-permanent layer. As...

Read More »
Coatings

Powder Coatings protect fastener heads.

Fused-On Powder Coatings prevent metal-to-metal contact, provide wear resistance, and protect against rust. Epoxy powder is applied by electrostatic spray or fluidized bed and cured in convection ovens. Nylon 11 and 12 powders are applied by electrostatic spray and cured by post heating induction process. Nylon 11 prevents galvanic corrosion between dissimilar materials, while thick coating of...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics