Release Agents

Coating lets molders choose necessary level of release.

Flex-Z family lets molders incrementally adjust level of release needed for specific parts and processes. HAP-free Coatings, from 1.0-6.0, provide level of release performance desired, enabling molders to switch between levels of product for different molds or apply simultaneous levels of product to one mold. Formula eliminates streaking across full range of application techniques. It suits open...

Read More »
Polyurethane Coating protects underground tanks/pipelines.
Coatings

Polyurethane Coating protects underground tanks/pipelines.

CHEMTHANE 2260(TM) solvent-free, 2-component polyurethane coating is applied directly to prepared steel, ductile iron, or concrete to provide corrosion protection for substrate. This 100% solids (Zero VOC) polyurethane, used to protect underground tanks, pipelines and pilings, cures to form hard polymer film that demonstrates resistance to adhesion, abrasion, and chemicals. It achieves high film...

Read More »
Top Coat helps maintain surface finishes.
Coatings

Top Coat helps maintain surface finishes.

Usable indoors and out, HI-GLOSS(TM) provides smooth, glossy floor with abrasion-resistance, eliminating need for frequent recoating. It also offers UV color stability and gloss retention in high traffic areas. HI-GLOSS(TM) is suitable for wood, brick, metal, and concrete, in laboratories, auto service centers, computer rooms, boat hulls, warehouses, chemical plants, cafeterias, and aircraft...

Read More »
Membrane seals out water from decks.
Membranes

Membrane seals out water from decks.

Grace Vycor® Deck Protector(TM) self-adhered flashing membrane seals around tops of deck joists to create impervious barrier against water and moisture, reducing likelihood of rot and extending life of deck. Able to be used under all decking materials, product is comprised of skid-resistant coating and includes measurement markings on membrane surface. It also protects galvanized fasteners...

Read More »
Tool Coating is used in milling and hobbing operations.
Coatings

Tool Coating is used in milling and hobbing operations.

With AlCrN (aluminum chromium nitride) formula, BALINIT® ALCRONA exhibits oxidation- and wear-resistance. It is suited for dry and wet machining of unalloyed steels as well as high-strength and high-hardness (up to 54 HRC) steels. Coating is also suited for use in applications involving heavy mechanical and thermal stresses.

Read More »
Solvent-Free Coating suits hangars and auto shop floors.
Coatings

Solvent-Free Coating suits hangars and auto shop floors.

PolyMax PM210, zero VOC floor coating consists of 100% solids, pigmented epoxy coating that resists damage from fuel and chemicals and bonds to concrete. Immune to effects of Skydrol, gasoline, or motor oil, product exhibits color stability, gloss retention, and impact- and abrasion-resistance. It can be installed as smooth finish or with slip-resistant texture from 8-20 mils. Coating suits areas...

Read More »
Liquid Rust Preventive provides long-term protection.
Sealants

Liquid Rust Preventive provides long-term protection.

DRI TOUCH® PLUS IRP3 penetrant and sealant works on impregnated and non-impregnated powdered metal parts, regardless of density or porosity of surface. Low viscosity liquid penetrates remaining porosity of powdered or sintered metals to displace moisture beneath surface. Once dry, it leaves semi-solid protective film that is absorbed by part itself. Protection levels range from 80-120 hr of...

Read More »
Dyes

Leak Detecting Dye works in large industrial equipment.

Spectroline® OIL-GLO(TM) 44 contains 2 fluorescent dyes: one fluoresces optimally under UV light, while other reacts best under blue light. Regardless of type of inspection lamp used, dye glows yellow-green to pinpoint leaks in all oil-based fluid systems. Dye remains safely in system until oil is changed, allowing for future detection if more leaks occur.

Read More »
Satin Urethane Topcoat suits heavy-wheeled traffic areas.
Coatings

Satin Urethane Topcoat suits heavy-wheeled traffic areas.

Chemical-resistant, 3-component Advanced Eco-HTS(TM) (High Traffic Systems) topcoat has 100% aliphatic, UV-stable formula, which combines aluminum oxide, ceramics, and abrasion-resistant polymer. Co-efficient of friction of .62-.66 (ASTM D2047) provides traction to increase slip-resistance. Use of VOC-VOS compliant product achieves finish that protects against damage due to dirt, wear, chemicals,...

Read More »
Corrosion-Resistant Coating can be applied without primer.
Coatings

Corrosion-Resistant Coating can be applied without primer.

High-gloss Iron Guard(TM) DTM Acrylic Enamel enables direct-to-metal application on new or cleaned metal. Low VOC, low odor enamel complies with current regulations and lowers emmissions. Gloss retention technology enables resistance to early moisture, chemicals, flash rust/early rust, and corrosion. Iron Guard is available in 13 package colors, 3 tinting bases, and 2 primers. Suitable substrates...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics