Metal Coating uses no EPA regulated chemicals.
Miscellaneous Compounds

Metal Coating uses no EPA regulated chemicals.

Microlok® AO metal coating provides corrosion resistance using non-corrosive bath. Immersion tank process works on iron and non-stainless steel surfaces to form 0.000040 in. thick aluminum oxide conversion coating. When sealed with rust preventive topcoat, Microlok AO protects parts during storage and shipping and provides break-in lubricity and anti-galling protection. Finish is suited for...

Read More »
UV-Reactive Dye reveals leaks in oil-based systems.
Dyes

UV-Reactive Dye reveals leaks in oil-based systems.

Leaks in oil-based lubrication and hydraulic systems are made visible by Spectroline® OIL-GLO(TM) 22 dye. Product escapes with oil and accumulates at site of each leak where it glows bright yellow-green when illuminated by UV or UV/blue light lamp. Dye remains safely in system until oil is changed, enhancing preventive maintenance. Periodic inspections with lamp will detect any future leaks...

Read More »
Polymers

Polyester Binder forms recyclable auto headliners.

Celanex® polybutylene terephthalate (PBT) copolymer binder, which melts at 147°C, creates all-polyester hood and trunk liners in non-reactive, thermal operation. It meets European recyclability regulations and is used in powdered form to fuse mat of polyethylene terephthalate staple fibers that melts at 250-257°C. Material bonds various other fibers in felts or fabrics and can...

Read More »
Photoresists

Dry Photoresists provide wafer bumping.

Series WB Photoresists offer alternative for wafer bumping versus liquid resists. Thick, dry photoresists, ranging from 50-100 microns, are applied in one step, with no solvents or drying required. Range of formulations are available for use in lead-free, photostencil, and standard electroplating applications.

Read More »
Epoxy Siloxane applies in one coat.
Coatings

Epoxy Siloxane applies in one coat.

Dual-component Polysiloxane XLE combines properties of epoxy and polyurethane in one coat. Glossy, self-priming coating is VOC-compliant and isocyanate-free and dries in 1 hr to corrosion-resistant finish. Suited for application by brush, roller, and conventional or airless spray equipment, product may be applied directly to properly prepared steel or over inorganic, zinc-rich primers. It is...

Read More »
Blackening Gel works on iron and steel substrate parts.
Miscellaneous Compounds

Blackening Gel works on iron and steel substrate parts.

Available in 1 and 5 gal containers and ready for application, PRESTO BLACK® GEL can be used on any size part in limited quantities. After cleaning part surface, user swabs on layer of product with synthetic paintbrush and allows Gel to work for 2-10 min. Gel adheres to metal surface and blackens uniformly without running off, even on vertical surfaces. Resultant protective black finish...

Read More »
Paint prevents high-temp oxidation of graphite foam.
Paints

Paint prevents high-temp oxidation of graphite foam.

Pyro-Paint(TM) 634-SIC is a high-temperature, silicon carbide-based, oxidation-resistant coating that protects graphite foam in applications as high as 2,550°F. Single-part, 75% solids material is non-volatile and can be applied using paintbrush, roller, dip process, or spray equipment. Water-based product dries quickly at room temperature within 1 hour, and cures by heating to 200°F and...

Read More »
Release Agents

Coating lets molders choose necessary level of release.

Flex-Z family lets molders incrementally adjust level of release needed for specific parts and processes. HAP-free Coatings, from 1.0-6.0, provide level of release performance desired, enabling molders to switch between levels of product for different molds or apply simultaneous levels of product to one mold. Formula eliminates streaking across full range of application techniques. It suits open...

Read More »
Polyurethane Coating protects underground tanks/pipelines.
Coatings

Polyurethane Coating protects underground tanks/pipelines.

CHEMTHANE 2260(TM) solvent-free, 2-component polyurethane coating is applied directly to prepared steel, ductile iron, or concrete to provide corrosion protection for substrate. This 100% solids (Zero VOC) polyurethane, used to protect underground tanks, pipelines and pilings, cures to form hard polymer film that demonstrates resistance to adhesion, abrasion, and chemicals. It achieves high film...

Read More »
Top Coat helps maintain surface finishes.
Coatings

Top Coat helps maintain surface finishes.

Usable indoors and out, HI-GLOSS(TM) provides smooth, glossy floor with abrasion-resistance, eliminating need for frequent recoating. It also offers UV color stability and gloss retention in high traffic areas. HI-GLOSS(TM) is suitable for wood, brick, metal, and concrete, in laboratories, auto service centers, computer rooms, boat hulls, warehouses, chemical plants, cafeterias, and aircraft...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics