Epoxy Floor System reflects variety of color.
Coatings

Epoxy Floor System reflects variety of color.

Offering substitute for granite, marble, and terrazzo floors, Diamond Reflection(TM) series is nonporous, has no grout joints to harbor dirt, and can be installed with smooth or textured non-slip finish. System uses high build aliphatic urethane finish that is color stable and offers abrasion resistance to pedestrian traffic for extended wear. Diamond shaped particles are part of floor, not a...

Read More »
UV Curable Compound adheres to plastic, glass, and metals.
Sealants

UV Curable Compound adheres to plastic, glass, and metals.

Flexible, optically clear UV19 cures upon exposure to UV light at ambient temperatures. Compound is 100% reactive, does not contain any volatiles, and offers abrasion resistance and heat stability. With tensile strength in excess of 800 psi and viscosity of less than 300 cps at 75°F, compound is suited for laminating, sealing, and bonding to substrates with different thermal expansion...

Read More »
Paint features 316L stainless steel leafing pigment
Paints

Paint features 316L stainless steel leafing pigment

STEEL-IT® High-Temp Metallic Blend No. 7156 Paint features 316L stainless steel leafing pigment and other metallic components that create satin metallic finish capable of withstanding temperature cycling effects. Offered in pints, quarts, and gallons, product employs rust inhibitors that negate unfavorable reactions caused by high temperatures, salt-air weathering, and wet environments....

Read More »
VOC-Free Coatings protect concrete floors.
Coatings

VOC-Free Coatings protect concrete floors.

Applied via brush, roller, or squeegee, Floor Savers(TM) coatings protect walkways, ramps, platforms, and walls against chemicals, solvents, hydrocarbons, acids, and alkalis. Gray, epoxy-based formulations attain functional cure in 24 hr. Products include self-leveling Epoxy Coat(TM) 7000 NonVOC; Epoxy Coat 7000 AR, which withstands sulfuric acid concentrations up to 98%; and self-leveling Epoxy...

Read More »
Masks and Masking

Privacy Masking Unit works with any fixed camera.

Intended for installation where privacy may be violated, Model RVD-162X-PM can be applied to up to 16 standard CCTV cameras of any brand and type. It provides 8 different levels of transparency, making it possible to locate person behind mask but preventing identification. Masking can automatically be switched off in alarm situation or it may follow time schedule. Unit includes RS-232 remote...

Read More »
Epoxy Coating protects floors in industrial facilities.
Coatings

Epoxy Coating protects floors in industrial facilities.

Applied by brush or roller, FLOOR-NU DTO (Direct to Oil) bonds to steel and concrete substrates contaminated with petroleum oil, grease, or vegetable oil. Dual-component primer, with accompanying epoxy top coat, can be applied over marginally prepared rusted steel and existing coatings, resulting in seamless finish. Product does not release harmful components and, once installed, is USDA...

Read More »
Coatings

Refractory Material suits furnace construction and repair.

Spray-On Met-Silcast(TM) nanoparticulate refractory consists of pumpable, colloidal, silica-bonded, monolithic material that can be applied in hours or days rather than weeks or months. Product provides continuous, seamless surface with acid resistance for use in petrochemical and copper industries. Met-Silcast(TM) can be pumped at rates up to 15 tons per hour and is available in quantities of 2...

Read More »
Adhesive/Coating System insulates induction heating coils.
Adhesives

Adhesive/Coating System insulates induction heating coils.

Pyro-Putty(TM) 677 single-part, water-dispersed, alumina-silica based adhesive and coating system is suited for electrical insulation and bonding applications to 2,400°F. Thixotropic product is supplied in paste consistency with viscosity of 43,000 cps and specific gravity of 2.17 g/cc. After application, it dries at room temperature in 1-4 hr and cures in 2 hr at 200°F. Material produces...

Read More »
Coatings

Epoxy Coating is applied in one coat.

Enviroline 380 ultra-high solids, thick-film epoxy coating exhibits chemical- and solvent-resistance in addition to abrasion- and impact-resistance. It does not require preheating prior to application and is suited for tank and pipe owners as well as contractors.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers