Other Milling Cutters

Toroid Inserts provide eight usable edges.
Other Milling Cutters

Toroid Inserts provide eight usable edges.

Featuring 45 degree lead angle, RHINO-CARB Toroid inserts suit face milling, profiling, helical interpolation and chamfering applications. They come in Â-½, 5/8 and ¾ in. IC, with either T-land or dished-face edge. T-land inserts offer reinforced cutting edge for steels, irons and hard milling, while dished-face units provide high-positive cutting edge for stainless steels,...

Read More »
Emuge Introduces Comprehensive Line of Cutting Tools for Wind Turbines
Other Milling Cutters

Emuge Introduces Comprehensive Line of Cutting Tools for Wind Turbines

WEST BOYLSTON, MA U.S.A. (April 27, 2009) - Today Emuge Corp. introduced an extensive line up of tools optimized specifically for the production of wind turbine components. Continuous technology advancements in components and materials demand high quality tooling for the most efficient and cost-effective machining of parts used in today's wind turbines. Emuge's new Wind Power program offers a...

Read More »
60 Degree Face Mill suits heavy duty machining.
Other Milling Cutters

60 Degree Face Mill suits heavy duty machining.

With maximum cutting depth of .709 in., CoroMill 360 features wedge clamped, quick-release inserts housed in unique exchangeable cassette system whose precise location ensures accurate cutting. Heavy duty milling cutter is available in 6-20 in. dia, in close and extra close pitch design, and Arbor and CIS Arbor shank styles. Inserts are available in .748 and 1.10 in., and can be removed with one...

Read More »
Face Milling Tool features 45° axial inclination.
Other Milling Cutters

Face Milling Tool features 45° axial inclination.

Providing face cutting with small depths of cut in steel and stainless steel, CoroMill 345 suits applications ranging from small-batch, mixed machining to high-volume dedicated production lines. It is equipped with double-sided inserts that provide 4 edges on each side, and offers full cutting edge backing and insert-seat stability through shims with strategic support islands that match insert...

Read More »
Other Milling Cutters

Sandvik Coromant to Release Aerospace Engine Solutions Package

Fair Lawn, New Jersey, January 11, 2009 - Sandvik Coromant today announced its plan to release an Aerospace Engine Solutions Package in March 2009. The package will contain 5 standard products tailored to support the aerospace engine industry: o GC1115 - a new PVD coated grade for high temperature alloys offers improved toughness and excellent wear resistance o CoroCut angled inserts - the most...

Read More »
Sandvik Coromant to Introduce New Face Milling Solution in Early 2009
Other Milling Cutters

Sandvik Coromant to Introduce New Face Milling Solution in Early 2009

Fair Lawn, New Jersey, September 8, 2008 - Sandvik Coromant has unveiled the CoroMill 345, a flexible tool that provides high performance face cutting with small depths of cut in steel and stainless steel. Available in early 2009, the CoroMill 345 offers high performance across a spectrum of applications ranging from small-batch, mixed machining to high-volume dedicated production lines. As part...

Read More »
Other Milling Cutters

Valenite Unveils Multiple Technologies at IMTS 2008

New products and services can help increase productivity by 20 percent or more MADISON HEIGHTS, Mich., July 16, 2008 - Valenite LLC, a global manufacturer of cutting tools and tooling systems for the metalworking industry, will introduce several first-to-market innovations at its IMTS 2008 exhibit (booth # F2979) on September 8 - 13, 2008. This launch will specifically highlight exclusive carbide...

Read More »
Indexable-Insert Cutters suit large spur and helical gears.
Other Milling Cutters

Indexable-Insert Cutters suit large spur and helical gears.

Employing carbide substrates and coatings, OPTI-CUT(TM) Series is designed for gear gashing, shaping, and hobbing. Wear is accommodated by indexing inserts to new cutting edge, with 4 edges available before insert needs to be replaced. For secure clamping, insert screw clamping system uses angled clamping screws rather than screws that clamp at right angles to insert. Cutters are suited for...

Read More »
Milling Cutter System features side-lock insert clamping.
Other Milling Cutters

Milling Cutter System features side-lock insert clamping.

Suited for high-density yet compacted insert mounting, ValMILL(TM) VFORCE features Side Lock direct insert clamping design, which utilizes single screw and establishes anti-fling resistance to centrifugal forces when used in high-speed applications. Design also helps alleviate wear and tear on cutter bodies from chip abrasion. Most inserts have hexagonal shape providing up to 12 cutting edges....

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics