Other Milling Cutters

New Double Quattromill 14 Face Milling Cutter Extends Tool Life while Lowering Cutting Forces and Machine Power Consumption
Other Milling Cutters

New Double Quattromill 14 Face Milling Cutter Extends Tool Life while Lowering Cutting Forces and Machine Power Consumption

For cost effectiveness and increased depths of cut in roughing and finishing, the cutter uses double-sided inserts with eight cutting edges. Achieves depths of cut up to 0.236" (6mm) in 45° lead angle version and up to 0.315" (8mm) in 68° version. Available in standard or close pitch as well as in metric or inch versions with fixed-pocket and cassette styles.

Read More »
New Double Quattromill 22 Face Milling Cutter Features Surface Texture Technology
Other Milling Cutters

New Double Quattromill 22 Face Milling Cutter Features Surface Texture Technology

The Double Quattromill® 22 Face Milling Cutter is available in 45° lead angle and 68° cutter versions with depths-of-cut up to 9 mm and 11 mm respectively. The inserts come with wiper flats and high-axle rake angles that improve tool life. The cutter is offered in fixed pocket or cassette versions for diameters from 200 mm to 315 mm. The surface texture technology improves chip control and...

Read More »
The Next Wave of Intelligent Design Automation
Sponsored

The Next Wave of Intelligent Design Automation

In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.

Read More »
Other Milling Cutters

Star SU LLC and Neher Group form Agreement to Sell PCD tooling in North America

HOFFMAN ESTATES, IL. — Star SU LLC and Neher DIA GmbH Co. KG have entered a joint venture partnership that appoints Star SU to sell Neher’s PCD tooling portfolio in North America.Â-  The addition of Neher’s comprehensive line of diamond tools, including finish reamers, combination tools and PCD/CBN inserts, compliments Star SU’s current cutting tool offering to provide a full service...

Read More »
Exchangeable-Head Milling Cutters enable silent machining.
Other Milling Cutters

Exchangeable-Head Milling Cutters enable silent machining.

Suitable for machining operations in ISO P (steel) and ISO M (stainless steel), CoroMill® 316 Milling Cutters support high-feed face milling, slot milling, helical interpolation, shoulder milling, profile milling, and chamfer milling. Exchangeable heads allow users to easily and accurately switch between various operations, providing optimized radius variation, teeth frequency, geometry,...

Read More »
Multi-edge Milling Cutter features positive cutting action.
Other Milling Cutters

Multi-edge Milling Cutter features positive cutting action.

Featuring double-sided design with total of 14 cutting edges per insert, CoroMill® 745 is suited for face milling in large batch productions. Cutter offers 3 pitch versions: radially compensated MD pitch for when vibration is a factor, M pitch for general applications, and H pitch with higher number of teeth for higher productivity. Tilted insert positioning system in tip seat and...

Read More »
Round Knife Cutters/Slitters handle composites, textiles.
Other Milling Cutters

Round Knife Cutters/Slitters handle composites, textiles.

Electric round knife cutter, TASW12M, handles composite materials and soft materials up to 2 in. Torque produced by 350 W motor, combined with knife's RPM, allows cutting of rubber- and plastic-based material. Also available, TADD120DT direct-drive, bidirectional slitter consists of electric, 3-phase round knife (8-sided, 120 mm) cutter for high-speed technical textile and composite...

Read More »
Other Milling Cutters

Round Knife Cutters handle technical textiles and composites.

Equipped with 350 W motor, Monster Slitter TASW12M is suitable for cutting composite materials such as glass fiber, carbon fiber, Aramid, or any soft material up to 2 in. thick. Model TADD120DT, equipped with 3-phase induction motor, uses 8-sided 120 mm knife to cut thicknesses up to 2 in. Direct-drive, bi-directionalÂ- unit can reach speeds of 2,600 rpm. Both models have push button...

Read More »
Face Milling Tool targets automotive industry.
Other Milling Cutters

Face Milling Tool targets automotive industry.

Featuring 8 edges, CoroMill® 425 optimizes metal removal rate and tool life in ISO K application area. Finishing tool is intended for face milling of cast materials, such as engine and cylinder components, axle housings, brake carriers, and crankcases made of GCI, NCI, and CGI materials. With patented setting system, tool offers precise insert positioning that facilitates...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics