New Tahoe 2624 Switches Managed by Intel x86 Control Plane
Features two rear-facing I/O bays and can be upgraded with any combination of off-the-shelf Intel XEON® D. Supports 24 ports of 100/40G QSFP28 and 16 ports of 25/10G SFP28. Compatible with SONiC, Barefoot Deep Insight and Barefoot P4 Studio software tools.
Read More »
New Ethernet Switch Suitable for 19 in. Rack Installations
Powered by the next generation WeOS operating system, which ensures continuous operation. 28-port switch has all connectors located at the front for simple access and a range of different port configurations. Withstands the high EMI levels derived from load switching and lightning strikes and high ambient temperatures.
Read More »
New Industrial Ethernet Switches with 4 Gigabit Ethernet Ports and 2 Dual Rate SFP Slots
LMP-C602G-SFP-bt-V2 and LMX-C602G-SFP-V2 are designed with four gigabit Ethernet ports and two dual rate SFP slots. Supports the power redundancy feature using a dual-power input design with reverse polarity protection. Provides high EFT surge and ESD protection to prevent any unregulated voltage.
Read More »
New Ethernet Switch with Four PoE+ and Standard Ports
Include a desktop switch and a small form factor pluggable (SFP) option. Features Eight PoE+ ports and two uplink ports as well as LEDs for each port. Ideal for delivering PoE in commercial/industrial applications, offices, factories or in a NEMA enclosure.
Read More »
Key Considerations When Choosing a Power Cord
This white paper provides an overview of key considerations when choosing a power cord.
Read More »
New PoE Switches and Powered Media Converters Support 802.3bt PoE Devices
NetWaySP4BTWP is equipped with two GB SFP ports as well as VLAN support. NetWaySP4BTWPN model is designed for applications where local power is not available. NetWaySP4PX is a 4-port Ethernet to fiber media converter with an integral power supply/charger.
Read More »
OnTime Networks' CM-4012F0-MIL Gigabit Ethernet Switch Selected for Use in The Canadian Armoured Combat Support Vehicle (ACSV)
Dallas, Jan. 11, 2021 /PRNewswire/ -- OnTime Networks, a global leader for rugged, time synchronized Ethernet solutions for the Aerospace and Defense Industry, announced today the selection of its military rated CM-4012F0-MIL 12 Port Gigabit Ethernet switch by General Dynamics Land Systems-Canada for use in the Canadian Army's Armoured Combat Support Vehicle (ACSV). OnTime Networks was...
Read More »
New Desktop Smart Edge PoE Switch with Sixteen 30 W Gigabit PoE Ports
QGD-3014-16PT supports QVR Pro, HBS 3 and QuWAN SD-WAN to integrate surveillance deployment. Features Intel® Celeron® J4125 quad-core processor, 8GB DDR4 RAM and 4 x 3.5 inch SATA 6Gb/s drive bays. Ability to supply up to 140 W total power to PoE bullet cameras, fisheye cameras and 4K PTZ cameras.
Read More »
New Industrial Ethernet Switch with Simple-to-read Status LEDs
Feature either one or two small form factor pluggable ports. Aluminum alloy heat-sink shell and fan-less design helps to extend mean time between failures. Includes full or half-duplex mode support with auto-detect, auto-MDI/MDI-X ports.
Read More »
OnTime Networks CM-4012F0-AER Gigabit Ethernet Switch Selected by Airbus for Use in Flight Test Instrumentation High Speed Data Acquisition System Applications
Oslo, Norway, September 22, 2020 – OnTime Networks, a global leader for rugged, time synchronized Ethernet solutions for the Aerospace and Defense Industry, announced today the selection of its airborne-grade CM-4012F0-AER 12 Port Gigabit Ethernet switch by Airbus for use in flight test instrumentation high speed data acquisition system applications. OnTime Networks and Airbus have signed a...
Read More »
New Rugged USFF Embedded Computer Based on Quad-core Intel Atom E3845 Processor
Parvus DuraCOR 311 and Parvus DuraNET 20-11 a USFF 8-port GbE switch are optimized for demanding SWaP-C applications. DuraCOR 311 measures less than 40 in³ in volume and weighs less than 1.5 lb. DuraNET 20-11 measures only 10 in3 in volume and weighs only 0.5 lb.
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
