Motion Sensors / Detectors / Transducers

Multi-Sensor Board aids sensor design/verification.
Motion Sensors / Detectors / Transducers

Multi-Sensor Board aids sensor design/verification.

SENSORSHLD1-EVK-101 integrates 10 sensors: analog temperature, digital barometric pressure, Hall switch, magnetometer, digital accelerometer, digital magnetometer and accelerometer, digital gyroscope and accelerometer, analog UV, digital ambient light and proximity, and digital color. Also featured, Arduino interface pinsÂ- ensure compatibility with existing open-source prototyping platforms...

Read More »
Motion Sensors / Detectors / Transducers

Parker Introduces Cloud-Based and High-Strain Sensors at 2016 Sensors Expo

Debuts Two New Products at McEnery Convention Center, San Jose, CA - Booth #424 Golden Valley, Minn. - The Industrial Internet of Things (IIoT), continues to open new doors for technological innovation. Parker Hannifin Corporation, the global leader in motion and control technology, is bringing its latest contributions to the condition monitoring sensors market. These new products will be on...

Read More »
Triaxial DC Accelerometers offer low noise, long-term stability.
Motion Sensors / Detectors / Transducers

Triaxial DC Accelerometers offer low noise, long-term stability.

Integrated plug-and-play modelsÂ- 2460 and 2466 are operationally identical to models 2470 and 2476, which add initial calibration certificates, reduced bias, and improved scale factor temperature shift specifications. All modles incorporate 3 orthogonally mounted, single-axis accelerometers into epoxy-sealed, anodized aluminum case. Standard ranges are ±2 to ±400 g, and...

Read More »
MEMSIC to Showcase Industrial, Wearable and Smart Cities IOT Sensing Solutions at Sensors Expo and Conference 2016
Motion Sensors / Detectors / Transducers

MEMSIC to Showcase Industrial, Wearable and Smart Cities IOT Sensing Solutions at Sensors Expo and Conference 2016

With over one billion sensors shipped, MEMSIC is a world leader for the consumer electronics, communications, automotive, medical and industrial sensing sectors Sensors Expo, San Jose, CAÂ- - June 1, 2016 - MEMSIC, Inc. plans to demonstrate its full range of advanced sensing technologies at the Sensors Expo and Conference, to be held June 21 to June 23, 2016 at the McEnery Convention Center...

Read More »
Standard Motor Products Releases 186 New Parts for Standard® and Intermotor®
Motion Sensors / Detectors / Transducers

Standard Motor Products Releases 186 New Parts for Standard® and Intermotor®

NEW YORK - Standard Motor Products, Inc. (SMP) announces the addition of 186 new part numbers to its Standard® and Intermotor® lines. The release expands coverage through the 2016 model year covering more than 67.5 million additional VIO. SMP introduced 90 new sensors covering 23 million VIO. Highlights include 47 accelerator pedal sensors, 16 ABS speed sensors, 7 mass air flow (MAF)...

Read More »
MEMSIC Announces 1 Billion MEMS Sensors Shipped
Motion Sensors / Detectors / Transducers

MEMSIC Announces 1 Billion MEMS Sensors Shipped

MEMSIC sensing technology is used in almost every electronic device Andover, MA. MEMSIC, Inc., today announced the shipment of its 1 Billionth MEMS sensor. MEMSIC’s products, ranging from accelerometers to sophisticated inertial guidance systems, are used in a wide variety of applications including automotive safety systems, avionics, industrial controls, and consumer electronics. MEMSIC’s...

Read More »
Motion Sensors / Detectors / Transducers

Nanometrics to Set Up Texas-wide Earthquake Monitoring System

OTTAWA,Â- – Nanometrics, the world's leader in seismic monitoring solutions, has signed a $1.98 million (US) contract to provide equipment and assist in deploying an earthquake monitoring system across the state of Texas. The TexNet Seismic Monitoring Program will allow for more precise determination of the location of earthquakes, and increase the ability for researchers to...

Read More »
Motion Sensors / Detectors / Transducers

High-Speed Door Safety System communicates presence with light.

To prevent potential accidents, including collisions between forklifts and workers, LED Virtual Vision® warns workers when another worker or object is approaching high-speed door from opposite side. Motion sensor on each side of door triggers one strip of red LED lights to flash on opposite side. Typically, LED lights are placed just outside of door's frame on each side but can be set...

Read More »
Stainless Steel Accelerometers feature M12 connector.
Motion Sensors / Detectors / Transducers

Stainless Steel Accelerometers feature M12 connector.

ICP® accelerometers, designed for predictive maintenance vibration monitoring, include models 601A92 (500 mV/g), 602D91 (100 mV/g), and 603C91Â- (100 mV/g) with respective measurement ranges of ±10, ±50, and ±50 g and frequency ranges (±3 dB) of 0.17–10,000 Hz, 0.5–8,000 Hz, and 0.5–10,000 Hz. While 601A92 and 603C91 have 316L...

Read More »
Standard Motor Products Releases 250 New Parts for Standard® and Intermotor®
Motion Sensors / Detectors / Transducers

Standard Motor Products Releases 250 New Parts for Standard® and Intermotor®

NEW YORK,Â- – Standard Motor Products, Inc. (SMP) announces the addition of 250 new part numbers to its Standard® and Intermotor® lines. The release expands coverage through the 2016 model year covering more than 200 million additional VIO. The company increased switch coverage by 40 million VIO with the introduction of 90 SKUs, including 25 combination switches and 20...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics