Miscellaneous Controls

Miscellaneous Controls

Motion Control is optimized for 48 V brushless motors.

EB04 provides outputs for brushless dc motors, steppers, ac motors, and three-phase power generation. Output current is rated 5A continuous/10A peak, and is compatible with PWM frequencies up to 25 kHZ. It has separate source outputs for negative rail current sense, single supply for gate drive and logic, built-in delay to eliminate shoot-through from FET cross-fire, sleep mode for reduced power...

Read More »
CNC Retrofit Package fits 3 axis milling machines.
Miscellaneous Controls

CNC Retrofit Package fits 3 axis milling machines.

PC-based Vega MLM-3A CNC has dynamic interpolator processor which creates true constant rate acceleration/deceleration. This allows parts to be cut at high feed rate while cutting smooth surface, which increases production. It has handwheel and pushbutton jog interfaces, manual tapping, programmable cycles, mirroring, scaling, and tool length and cutter diameter compensation. Retrofit package can...

Read More »
Motion Control System integrates in-drive PLC with controller.
Miscellaneous Controls

Motion Control System integrates in-drive PLC with controller.

Omega Drive Line II offers cam profile of 4096 points and resolution of 4 million ppr. PLC can process 100 microseconds per 1,000 lines of code, and controller has cycle time of 62.5 microseconds. CANsync field bus permits use of cluster concepts with several hundred axes synchronized within time frame of 1 ms and with transfer speed of 1 Mbps. PROPROG programming software supports IEC 61131...

Read More »
Fan Control IC provides variable speeds.
Miscellaneous Controls

Fan Control IC provides variable speeds.

ZXBM2000 series of ICs controls 2-phase, dc brushless fan and blower motors up to 100W. ZXBM2003 provides frequency generator rotor speed output; ZXBM2002 offers locked rotor error output; and ZXBM2M001 combines both signals on dual function pin. All deliver up to 80 mA to pair of external MOSFET or bipolar transistors connected to fan motor windings. Speed control is implemented via variable...

Read More »
Miscellaneous Controls

Transmitter/Receiver provides wireless control.

860 MINI/MAXI Series is mounted in IP65/NEMA 4X enclosure for safety and weather protection. Relays operate in modes of Latching, Momentary, or Combination. Receiver has over 65,000 security code combinations and works with 1/4, 1/2, and 5/8 wave antenna choices, depending on application. Power options include: 12/24 Vdc/ac and 115, 230, and 48 Vac.

Read More »
Liquid Color Management System ends handling problems.
Miscellaneous Controls

Liquid Color Management System ends handling problems.

Pump-in-a-Drum(TM) system is based on metering mechanism whose pump is inside standard-size drum that stays sealed. During processing, system meters color through sealed tubing assembly, with automatic shutoffs preventing spillage. Changeover from empty to full drums is automatic, requiring no monitoring by operator. By returning drum to company, processor avoids problems of discarding it.

Read More »
High-Speed CNC Control suits industrial automation.
Miscellaneous Controls

High-Speed CNC Control suits industrial automation.

10/Series achieves 1 millisecond block processing speed, with 5 axes interpolation and 164 block look ahead. Series includes full range of controllers for basic single spindle, 3-axes applications to complex systems of 20 processes and 32 axes. Controllers are supported by standard PC architecture, Windows compatibility, libary for personalized graphics and program management, Interbus interface,...

Read More »
Mainframe is compatible with hot runner control modules.
Miscellaneous Controls

Mainframe is compatible with hot runner control modules.

Tri-Zone(TM) portable controller mainframe accommodates Athena(R) Series IMP, RMB, RMC or other hot runner control modules designed to fit standard vertical mainframes. Available with or without communications interface, 3-zone mainframe is pre-wired and includes hot swappable connectors for controllers equipped with SafeChange(TM) feature. It includes side-mounted ventilation fan and built-in...

Read More »
Programmable Step Control offers 32 configurations.
Miscellaneous Controls

Programmable Step Control offers 32 configurations.

Model S95 provides 32-in-1 resistance heating load control solution for OEM and replacement applications. It is designed for field-selectable input options including 2200 ohm, 135 ohm, 4 to 20 mA, and 0 to 10 Vdc. Unit offers selectable linear or progressive switching and proportional or deadband control capability. It utilizes vernier control to drive B-Series or S-Series power controllers, and...

Read More »
DC Speed Control offers digital closed loop feedback.
Miscellaneous Controls

DC Speed Control offers digital closed loop feedback.

MD Series MICRO-DRIVE, for motors rated to 2 HP, can precisely control speed to +/-0.5 rpm of set speed. It features adjustable acceleration and decleration ramp inputs, adjustable min and max speed values, and master or follower operational modes. On-board microprocessor includes non-volatile memory. Display is adjustable for intensity, decimal point position, and zero blanking. Universal power...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers