Miscellaneous Boards

Evaluation Boards are embedded with iCoupler® technology.
Miscellaneous Boards

Evaluation Boards are embedded with iCoupler® technology.

Facilitating testing of propagation delay, drive strength, Miller clamp functionality and input logic of the device, Evaluation Boards are available in EVAL ADuM4121 and EVAL-ADuM4135 models. Suitable for applications such as wireless infrastructure, microwave point-to-point links, electronic test and measurement, units provide operation with voltages of up to 35 V. Board come in TO-252, TO-220,...

Read More »
DesignCore™ RVP-TDA2x Development Kit comes with TDA2x SoC processor.
Miscellaneous Boards

DesignCore™ RVP-TDA2x Development Kit comes with TDA2x SoC processor.

Suitable for driver monitoring, and mirror replacement and camera monitoring systems, DesignCore™ RVP-TDA2x Development Kit features 3GHz FPD-Link III interface for synchronous acquisition of eight 1080p HD video streams. Designed with HDMI and FPD-Link III video outputs, and Ethernet, CAN bus, USB3.0 and serial connectivity, kit consists of SOM processor board, customizable baseboard,...

Read More »
Miscellaneous Boards

Qualified Calibre PERC Rule Decks support UMC 28 nm technology.

Qualified Calibre® PERC™ reliability rule decks, available for United Microelectronics Corp's (UMC) 28 nm technology, allows UMC customers to extend use of Mentor-based flows to incorporate advanced electrical reliability analysis. Included coverage spans ESD protection, power clamp circuit verification, verification of current density on ESD path, and verification of point-to-point...

Read More »
An Introduction to Plastic Injection Molding
Sponsored

An Introduction to Plastic Injection Molding

We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.

Read More »
Test Board accepts surface mount and through hole connectors.
Miscellaneous Boards

Test Board accepts surface mount and through hole connectors.

Rated to 700 Vdc/500 Vac, Model CB51 may be used on all CableEye® cable and harness testing systems. Sold without connectors, board contains 4 sets of 60 solder pads accommodating aligned and staggered, 1.25 mm and 1.5 mm pitch, surface mount and through hole connectors. There are 4 preset locations for automatic detection and display of any-pin-count connector up to 60-pins. Any single set...

Read More »
Miscellaneous Boards

ARM Cortex-R52 CPU Kit fosters accelerated adoption and use.

Cadence® RAK (Rapid Adoption Kit) is optimized for ARM® Cortex®-R52 CPU, which targets embedded designs forÂ- automotive, medical, and industrial safety applications. Solution, which consists of complete digital implementation and signoff flow, works with ARM Artisan® physical IP to help designers meet challenging PPA (power, performance, and...

Read More »
Miscellaneous Boards

Development Board supports 16- and 32-bit microcontrollers.

With integrated programmer/debugger, Explorer 16/32 Development Board serves as platform for customers to evaluate 16-bit PIC24, dsPIC33, and 32-bit PIC32 families of microcontrollers through Processor Plug-In-Modules for device swapping. Board features mikroBUS™ interface to add new functionalities using Click™ Boards from MikroElectronika. In addition, board supports integrated USB for both...

Read More »
Miscellaneous Boards

Richardson RFPD Announces Participation at EDI CON USA 2016

Live demos, new products, and Analog Devices Radioverse™ RF wideband transceiver evaluation board giveaway featured at Richardson RFPD booth #806 Geneva, Ill.: Richardson RFPD, Inc. announced today its participation in EDI CON USA 2016, to be held in Boston, MA, September 20-22, 2016. EDI CON USA brings together RF, microwave, EMC/EMI and high-speed digital design engineers and system...

Read More »
Miscellaneous Boards

Future Electronics and Microsemi Introduce the Lowest Cost Board on the Market Using Microsemi's Latest FPGAs

Montreal, QC and Aliso Viejo, California - Future Electronics and Microsemi Corporation (Nasdaq: MSCC) announced the Future-designed Creative Development Board, featuring Microsemi’s IGLOO™2 field programmable gate array (FPGA) or SmartFusion™2 system-on-a-chip (SoC) FPGA and Microsemi’s LX series power devices. The Future - Microsemi Creative Development Board boasts a 25k logic element...

Read More »
Miscellaneous Boards

Development Kit supports Advanced Driver Assistance Systems.

Based on DesignCore™ Rugged Vision Platform Reference Design with Texas Instruments TDA3x Automotive Vision Processor, DesignCore™ Development Kit lets product development teams evaluate ADAS technology under realistic on-vehicle conditions. DesignCore™ RVP-TDA3x Reference Design enables synchronous acquisition of 4 HD video streams with real-time vision processing and analytics. Kit...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers