Measuring Equipment

Printed Circuits, Inc. Purchases Unique ProX5 Scanner and Measuring Machine from IMPEX
Image Scanners

Printed Circuits, Inc. Purchases Unique ProX5 Scanner and Measuring Machine from IMPEX

Printed Circuits, Inc. (Minneapolis, MN) has purchased a ProX5 scanner/measurement machine from IMPEX Leiterplatten, St. Michael, Austria. This will be the very first ProX5 unit to be placed in the United States. IMPEX exhibited its predecessor, the ProX1 at last year's IPC APEX show in Las Vegas, and exhibited the next generation ProX3 at Productronica in Munich last fall. Both machines have...

Read More »
Mahr Federal to Feature MarSurf® M 400 Skidless Surface Gage at WESTEC 2012
Profile Gage

Mahr Federal to Feature MarSurf® M 400 Skidless Surface Gage at WESTEC 2012

PROVIDENCE, RI - Mahr Federal will be featuring the addition of an economical and powerful new skidless surface evaluation system to its MarSurf® line of mobile surface metrology systems at WESTEC 2012, March 27-29, 2012, at the Los Angeles Convention Center, Los Angeles, CA. Mahr Federal will occupy booth #3132. The new MarSurf M 400 features proprietary motorized probe height adjustment...

Read More »
PCB Track Current Probe presents minimal disturbance.
Electrical / Electronic Probes

PCB Track Current Probe presents minimal disturbance.

Suited for use with any oscilloscope, Aim-TTi I-Prober 520 allows observation and measurement of current flow by placing insulated tip onto PCB track. Handheld unit can also be used on other conductors, such as captive wires, components, IC pins, and PCB ground planes. General-purpose H-field probe, based on fluxgate magnetometer principle, measures track currents from 10 mA to 20 A (pk-pk), with...

Read More »
Non-Invasive Analyzer examines O2 in pharmaceutical blisters.
Gas and Chemical Indicators

Non-Invasive Analyzer examines O2 in pharmaceutical blisters.

With optical sensor that gives off light directly related to amount of oxygen present, OpTech® - O2 system enables non-invasive, non-destructive thermoformed blister package testing. System complies with ASTM F2714, is stable in ambient light, and can determine oxygen headspace, dissolved oxygen, ingress, and permeation rate in flexible and rigid packaging under real-life conditions. Values...

Read More »
Multichannel RF Measurement Tool addresses LTE and beamforming.
Miscellaneous Analyzers

Multichannel RF Measurement Tool addresses LTE and beamforming.

Using 89600 VSA (vector signal analysis) software release 15, N7109A covers emerging multichannel LTE, LTE-Advanced, and MIMO RF measurement requirements by delivering phase synchronous measurements with up to 8 RF channels in one mainframe and independent center frequency tuning for each tuner module. Software provides general-purpose and standards-based tools for evaluating signal spectrum,...

Read More »
HITACHI to Unveil Production Support Systems, Software at IPC/APEX 2012
Network Software

HITACHI to Unveil Production Support Systems, Software at IPC/APEX 2012

Dallas, Texas, USA - In addition to their flagship Sigma G5 high-performance, compact, modular mounter, the Production Systems Division (PSD) of Hitachi High Technologies America, Inc. (HTA), will also exhibit powerful, innovative Production Support Systems and software tools that complement the G5's performance and capability. These will be shown at IPC/APEX 2012 in Booth #2440. IPC/Apex 2012...

Read More »
Flow / Pressure Probes

Airflow Monitor generates one signal for multi-fan arrays.

MatrixMonitor(TM) gauges airflow in arrays with 3-98 fans, with max airflow of 300,000 cfm per array. Offering alternative to fan inlet and piezometric flow monitors, this digital instrument consists of sensors and internal wiring for each fan connected to embedded processor. Solution operates on 100 W power supply and generates one airflow signal for entire fan array. With dual fan array...

Read More »
Pick-and-Place Machine measures placing force.
Measuring Equipment

Pick-and-Place Machine measures placing force.

Available as option on FLX2011 Series machines, placing force measurement system consists of chuck where actual placement takes place. Chuck allows for processing of substrates such as PCBs with max size of 200 x 200 x 3 mm. By means of software plug-in, actual placement force from 0-5 N ±0.5 N can be predefined. Spring characteristic is calibrated for each nozzle and data is stored in...

Read More »
Illuminance Spectrophotometer takes multiple measurements.
Photometers

Illuminance Spectrophotometer takes multiple measurements.

Designed for use without PC, CL-500A can measure illuminance, chromaticity, color temperature, and CRI. In addition to LED and OLED markets, RoHS-compliant light measurement product can be used in R/D and color inspection of projector light sources, digital signage, and any application where measuring total flux or light distribution characteristics is required. Additional features include...

Read More »
Hot-Wire Thermoanemometer has handheld, rugged design.
Anemometers

Hot-Wire Thermoanemometer has handheld, rugged design.

Supplied in 5 x 2.5 x 1.25 in. housing and powered by 9 V battery, handheld VT100 measures air velocity from 0-6,000 fpm with 0.01 resolution and temperature from -4 to +176°F. Ice Blue backlit 128 x 128 pixel LCD can be read in light or dark environments, and engineering units (m/sec, fpm) are user-selectable. In addition to Max, Min, and Hold functions, features include adjustable shut...

Read More »

All Topics