Material Handling and Storage Racks

Cambro Introduces Ultimate #10 Can Rack with Gravity Fed System
Material Handling and Storage Racks

Cambro Introduces Ultimate #10 Can Rack with Gravity Fed System

The Ultimate #10 Can Rack allows foodservice operators to configure exactly the amount of can storage required. The unit can hold up to eight #10 cans and 12 #5 cans in a single rack with total cans of 96 and 144 cans in a Full-Size Can Rack Unit respectively. The gravity fed system supports first in first out organization and food rotation without the requirement of moving the rack for loading...

Read More »
New XRS XPAND Battery Rack System Comes with Battery Disconnect Units and Local Mode Controllers
Material Handling and Storage Racks

New XRS XPAND Battery Rack System Comes with Battery Disconnect Units and Local Mode Controllers

XRS XPAND Battery Rack System consists of two strings of ten series-connected packs with an operating voltage of up to 1000 V and an energy up to 222 kWh. The system utilizes pouch format lithium-ion cells of high power, high energy, and ultra-high energy versions based on the operational demands. Incorporating XPAND battery packs and Battery Management Systems, XRS system meets DNV GL Type...

Read More »
Steel King Introduces Drive-In Rack Systems with Unlimited Storage Depth
Material Handling and Storage Racks

Steel King Introduces Drive-In Rack Systems with Unlimited Storage Depth

The new Drive-In Rack System is a solution for high-density storage applications. The system requires fewer aisles than in selective racking, allowing the user to store up to 75% more pallets. It  provides last in, first out (LIFO) access for forklifts with the same point of entry and exit. This rack system is ideal for high-traffic and cooler/freezer installations. An optional offset leg design...

Read More »
CBS ArcSafe-® RRS-3 SecoVac Remote Racking System Wins EC&M Magazine 2017 Product of the Year Award
Material Handling and Storage Racks

CBS ArcSafe-® RRS-3 SecoVac Remote Racking System Wins EC&M Magazine 2017 Product of the Year Award

Denton, Texas, April 17, 2017 – The CBS ArcSafe® RRS-3 SecoVac (IEEE) Application Specific Remote Racking System (RRS) line has won Electrical Construction & Maintenance (EC&M) magazine’s 2017 Product of the Year Award in the Specialty Products category. The RRS-3 SecoVac (IEEE) is designed for General Electric SecoVac VB2+ vacuum circuit breakers with current ratings from 1200A–3000A....

Read More »
IMS Select Hoist Ring Rack is double sided.
Material Handling and Storage Racks

IMS Select Hoist Ring Rack is double sided.

Featuring array of durable bars, sized in varying lengths and thicknesses, IMS Select Hoist Ring Rack accommodates large assortment of products. Designed with lower reinforced metal mesh tray accessible from both sides, unit provides area to place hammers, die bars, loose bolts and small tool boxes. Equipped with rubber gripped push handles and 5” rugged swivel/locking casters, rack ensures...

Read More »
Si Elegans, the Base for a Potential Major Step forward in computational Architecture Released October 18, 2016
Material Handling and Storage Racks

Si Elegans, the Base for a Potential Major Step forward in computational Architecture Released October 18, 2016

The Computational Intelligence Laboratory of Nottingham Trent University, UK, is part of the Si elegans project, set up in 2013 to create an emulation platform for the C. elegans nervous system. The objective is to create a reconfigurable, scalable and modular open-access computational platform that will provide a technological blueprint for a new era of brain-like computational architectures. C....

Read More »
Heavy-Duty Flow Racks handle logistics center demands.
Material Handling and Storage Racks

Heavy-Duty Flow Racks handle logistics center demands.

Built with 42 mm pipe and joint, Creform heavy-duty flow racksÂ- withstand industrial environment and hold heavy parts. Fully assembled and ready-to-use racks, nested inside pallet racks, give high-density flow racks at floor level while retaining upper levels of pallet racks for bulk storage. Rack featuresÂ- 8 leveling feet and Creform heavy-duty skatewheel conveyor, flow lanes are...

Read More »
Smart Pallet transports and stores bulk bags without damage.
Material Handling and Storage Racks

Smart Pallet transports and stores bulk bags without damage.

Free of wood splinters and sharp edges, BigBag Divider protects bulk bags against abrasion and damage. Four-sided fork shafts enable filling and transport using forklift, while tunnel design protects bags from contact with fork arms. Specially raised edges prevent bags from slipping or overlapping, further minimizing risk of damage. Measuring 43 x 43 in., nestable polyolefin product is suitable...

Read More »
Storage System fits underneath pallet rack.
Material Handling and Storage Racks

Storage System fits underneath pallet rack.

Using standard wire shelving and V-grooved floor track to glide left and right on aluminum skates, Floor Track Storage System allows for organized storage of product that typically lies underneath lowest pallet rack beam. Various sizes of shelf widths and lengths can accommodate any rack size above, and variety of post heights can be employed for any rack beam heights that exist.Â- Low...

Read More »

All Topics