Level Switches

Safety Switch suits SIL1, SIL2, and SIL3 installations.
Level Switches

Safety Switch suits SIL1, SIL2, and SIL3 installations.

IntelliPoint SXRNT Series RF Admittance Point Level Switch offers Auto-Calibration feature that detects presence or absence of material for maintenance-free operation. In-line unit measures liquids, solids, and slurry materials as well as interface between any insulating and conductive liquid. Included software monitors changes in composition, dielectric, or conductivity and maintains repeatable...

Read More »
Optical Switch operates in both single and multi modes.
Level Switches

Optical Switch operates in both single and multi modes.

Self-contained, Series LFS features front panel receptacles and latching-type optical switches that route signal in less than 10 ms. Single-mode operating wavelengths are 1,280-1,340 nm and 1,525-1,625 nm, while multi-mode is 850-1,350 nm. Unit can operate as a stand-alone switch or be integrated into system. Rated for more 10 million operations, switch is suited for CATV, data distribution,...

Read More »
Float Switch provides low level switching.
Level Switches

Float Switch provides low level switching.

FDA-compliant polypropylene Model L001 is actuated at levels as low as 3/8 in. water, is rated for 150 psig, and withstands temperatures to 200°F. Unit is top-mounted with standard 1/8 in. NPT or 3/8 in. thread, or base-mounted at bottom of tank using adhesive-backed mounting surface. Switch can be supplied with Buna-N floats for oils, gasoline, and lower density fluids. It is suited for...

Read More »
Liquid Level Switches are FM-approved.
Level Switches

Liquid Level Switches are FM-approved.

Featuring tuning fork measuring system with piezoelectric elements, Series LS 5000 is unaffected by product variations in density, conductivity, dielectric constant, or viscosity. Switches are also insensitive to foam, air bubbles, turbulence, pressure and temperature variations, strong external vibrations, or varying products. With tuning fork length of 1Â-½ in., they are suited for...

Read More »
Liquid Level Switch utilizes ultrasonic technology.
Level Switches

Liquid Level Switch utilizes ultrasonic technology.

SENTIO® LL-01 Series serves as direct replacement for mechanical float type liquid level devices. Utilizing ultrasonic technology and solid-state, surface-mount integral electronics with 6-30 Vdc input power and transient reverse polarity protection, it provides reliable operation in any liquid. Switch incorporates epoxy-sealed electronics, 1/4 in. NPT mechanical connection, and 316SS...

Read More »
Float Level Switch features up to 6 switch points.
Level Switches

Float Level Switch features up to 6 switch points.

Suited for sump level control, alarms, and shutdowns, MS50 features application-specific float designs. It features magnetic coupling and can be equipped with up to 6 SPDT switch points per unit. Latching switch design allows each point to be adjusted and replaced in field. FM Approved and CSA Certified for use in hazardous areas, multiple options are available to handle environments up to 800...

Read More »
Float Switch controls liquid levels in tanks.
Level Switches

Float Switch controls liquid levels in tanks.

Series CFS Cable Float Switch controls level of liquids in filling or draining reservoirs and tanks. Mercury-free product is designed with inverter micro switch housed in polypropylene cover. Unit includes counterweight to adjust stop and start levels of pump up/pump down application.

Read More »
Level Switch is suited for liquids and slurries.
Level Switches

Level Switch is suited for liquids and slurries.

Available with corrosion-resistant coatings, Dynatrol® RH-Series Liquid Level Detector Switch monitors high, intermediate, or low points and are approved for CL I, Groups C & D; CL II, Groups E, F & G, and CL III services. Detectors are constructed with no moving parts, require no adjustments, and are wear-free. They can be installed in any position through Â-¾ in. half-coupling on...

Read More »
Level Switches enable one-step external calibration.
Level Switches

Level Switches enable one-step external calibration.

Models KCAP300(TM) and KCAP400(TM) RF capacitance switches enable level detection from dielectric bulk solids to sticky slurries. KSHIELD(TM) technology provides immunity to conductive coating build-up and offers accurate, repeatable operation. KCAP300 switches feature 3-element shielded probe and optional external alarm indicating lamp. KCAP400 multi-point switches provide field-selectable modes...

Read More »
Level Switches provide sensing in silos and bins.
Level Switches

Level Switches provide sensing in silos and bins.

Series FW sense bulk materials, viscous liquids, and slurries in pressurized and non-pressurized silos and bins. Units accommodate shafts up to 20 ft in length and 4 different paddle types. They provide 10 rpm continuous operation and include heavy-duty gear train, 6/240 Vac A switch contacts, weatherproof electrical enclosure, and on-board fuse protection. Suited for operation outdoors, switches...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers