Leg Levelers

Vibration Isolation Mounts meet military standards.
Leg Levelers

Vibration Isolation Mounts meet military standards.

Suitable for extreme environments, Armor Plated Universal Mounts feature bonded-in steel wear surfaces that eliminate need for machining radius in support structure. Series 56422 All-Attitude holder-style mounts includes 3 models with max load ratings of 4.5, 7, and 10 lb, based on 0.036 in. double-amplitude input. Damped silicone elastomer provides vibration isolation over temperature range of...

Read More »
Metric Size Leveling Sets are RoHS compliant.
Leg Levelers

Metric Size Leveling Sets are RoHS compliant.

Made of zinc plated, blue passivated steel, series GN 350.1 Short Model leveling sets consist of threaded upper sleeve and tapped lower sleeve, and are used for leveling, adjusting, and linking operations of smaller dimensioned components. Fine thread allows precise, stepless setting and locking using hook wrench. Anti-rotation disk also serves as height limiter for max height.

Read More »
AirLoc Wedgmounts® Provide Precise Leveling/Isolation for Tire Uniformity Testing
Leg Levelers

AirLoc Wedgmounts® Provide Precise Leveling/Isolation for Tire Uniformity Testing

Micro-Poise Measurement Systems, LLC, headquartered in Akron, Ohio is a world leader in machinery specially designed for passenger and light truck tire testing. ASTEC PLUS(TM) is a critical component of the Micro-Poise Modular Tire Measurement System designed to optimize the tire testing process for uniformity and dynamic balance measurements. AirLoc 4-VRC/A Freestanding Wedgmounts were selected...

Read More »
RoHS Compliant Steel Leveling Mounts come in metric sizes.
Leg Levelers

RoHS Compliant Steel Leveling Mounts come in metric sizes.

Constructed of zinc plated steel with blue passivated finish, GN 339 steel leveling mounts are designed for applications where no jointed link is required between base and stud. Units are available with ISO 4035 hex nut of same material, and 2 types of pads: gliding pad of white Technopolymer Polyacetal and non-skid pad of black Technopolymer rubber, 73 shore hardness. Both types are embedded in...

Read More »
Leg Levelers

AirLoc Wedgmounts® with B2 Pads Isolate Okuma Lathe on Third Floor

A large manufacturer in Wisconsin had various types of metal working equipment located on the third floor of a production building. An Okuma Crown Model L lathe with bar feeder, which had competitor's elastomer leveling mounts installed, was transmitting high levels of vibration into the floor affecting the performance of nearby precision machining centers. The vibration problem was most serious...

Read More »
AirLoc Modifies 11-VRC Wedgmount® to Support Minster 800 Ton Press
Leg Levelers

AirLoc Modifies 11-VRC Wedgmount® to Support Minster 800 Ton Press

AirLoc standard Wedgmounts® are used frequently under all types of metal forming presses with easy installation, isolation, and leveling features. Recently in Canada, a Minster 800 ton press was being relocated into a pit with specific height and attachment requirements. AirLoc added stiff spacer pads and attachment bolts located to align with the press feet and required height. A drawing...

Read More »
Leg Levelers

Open Spring Mountings (ViFLEX Series, Models OM & OML)

Vibration Isolation manufactures an innovative Open Spring Mountings (ViFLEX Series, Models OM & OML). Our standard products are complimented by special designs to fit specific application requirements. We are continually enhancing our product features and introducing new products to meet changing industry requirements and improve the overall cost effectiveness of our products. The open spring...

Read More »
Leg Levelers

Penn Stainless Products, Inc., Quakertown, PA Has Commissioned Herr-Voss Stamco to Build and Install a Heavy Gauge Cut-to-Length Line

Callery, Pennsylvania - Penn Stainless Products, Inc., Quakertown, PA, has recently purchased a new Heavy Gauge Cut-to-Length Line from Herr-Voss Stamco. This new line, which includes an industry leading Herr-Voss Stamco Precision Leveler®, will allow Penn Stainless Products, Inc. to supply their customers with product of superior flatness. The line will process stainless steel coils up to...

Read More »
Leveling Pipe Lifter
Leg Levelers

Leveling Pipe Lifter

Caldwell's Leveling C-Hook Pipe Lifter lets you place and position concrete pipe up to 8' in length in one operation. The leveling bail adjusts quickly and easily for varying pipe lengths and the adjustable bail block makes repetitive lifts easy to handle. The stand-up bail makes it easier for the operator to pick up the lifter. Other features include; replaceable polyurethane lifting saddle,...

Read More »
Steel Leveling Sets come with spherical washers.
Leg Levelers

Steel Leveling Sets come with spherical washers.

Offered in metric sizes, RoHS compliant series GN 350.2 sets are made of zinc-plated, blue passivated steel for leveling, adjusting, and linking operations. They consist of threaded upper sleeve and tapped lower sleeve and have spherical washer for precise installation of 2 non-parallel planes at required gradient up to -4°. Fine thread allows stepless setting and locking using DIN 1810A...

Read More »

All Topics