Leak Sensors / Detectors

Leak Detection Flashlight slashes inspection time.
Leak Sensors / Detectors

Leak Detection Flashlight slashes inspection time.

With focused beam, OPTIMAX(TM) 3000 helps technicians pinpoint all refrigerant leaks, even elusive leaks that are missed by other lamps and by other methods of leak detection. Portable unit uses super-hi-flux LED technology equal to that of 150 W lamp. Powered by rechargeable NiMH battery, flashlight has inspection range up to 20 ft and 50,000 hour bulb life. Product comes with...

Read More »
Leak Detection Relay monitors 2 submersible pumps.
Leak Sensors / Detectors

Leak Detection Relay monitors 2 submersible pumps.

Used to monitor shaft seal of pumps before failure, Series DLD dual-channel leak detection relay finds leaks by sensing status of float or conductivity switch installed in seal cavity. It offers NO relay contacts to energize alarm and deenergize pump in event of leak and includes LED indicator. Installed via 2-pin octal mount, unit is available in sensitivities of 10-25 kW adjustable and 4.7-100...

Read More »
Leak Detector is suited for gas-fired condensing furnaces.
Leak Sensors / Detectors

Leak Detector is suited for gas-fired condensing furnaces.

Developed for HVAC trade as 3 oz aerosolized can with 4 in. long nozzle extension, QwikDectector-HE(TM) can save lives by early detection of leaks due to defects caused by corrosion, expansion/contraction cracks, or manufacturer error that exposes occupants to CO. It penetrates heat exchanger fissure as small as 24/1,000 in. after one 5 sec spray into drilled 1/8 in. furnace plenum hole. Unit...

Read More »
Leak Sensors / Detectors

QuadraScan Technologies LLC Signs Manufacturing Agreement with Weldmation Inc., Assembly Provider in Detroit Area

BRENTWOOD, Tenn., -QuadraScan Technologies LLC today announced the signing of a manufacturing agreement with Weldmation Inc., of Madison Heights, Mich., to be the primary manufacturer for the QuadraSonic Array(TM), according to Scott Farrell, president of QuadraScan Technologies LLC. This agreement will strengthen the infrastructure of QuadraScan Technologies and position the company for future...

Read More »
Leak Sensors / Detectors

Leak Detection Systems protect infrastructures of any size.

Designed to monitor 6 zones, SeaHawk LDRA6 detects and reports presence of conductive fluids that come in contact with up to 1,000 ft of SC cable in each zone. Upon contact, alarm sounds and summary alarm relay and zone relay activate. Suited for smaller areas, single-zone SeaHawk LD300 continuously monitors up to 300 ft of SC cable. It includes visual alarm indicator and 2 output relays for leak...

Read More »
Leak Sensors / Detectors

Helium Leak Testing, Inc. Certifies the World's Largest Single-Piece, Tantalum-Lined Column

Pressurized column contains corrosive chemicals that would create a hazard if released to the atmosphere Northridge, CA. - May 9, 2007 - Helium Leak Testing, Inc. (HLT), a national provider of helium leak detection systems and services recently completed the leak free integrity of a ninety-foot long, five-foot diameter pressurized column for Titan Metal Fabricators, Camarillo, CA. The project was...

Read More »
Leak Sensors / Detectors

Infrared Camera detects VOC leaks.

Suited for petrochemical facilities, ThermaCAM-® GasFindIR(TM) utilizes infrared imager employing sensitive detector and cold filter to observe active leaks of VOCs such benzene, propane, and methane. Real-time thermal images of gas leaks appear as black smoke onscreen. Users can capture and record images to any off-the-shelf video recorder for archiving, documenting, or emailing.

Read More »
Leak Detector senses water leaks and sounds alarm.
Leak Sensors / Detectors

Leak Detector senses water leaks and sounds alarm.

Battery or line powered, Series WD2 relies on electrical conductivity of water to change resistance across 2 contacts located at base of enclosure. When there is enough water to bridge contacts, alarm is triggered. Detector can be placed on flat surface under HVAC equipment, dishwashers, washing machines, refrigerators, compressors, and in electrical switchgear rooms.

Read More »
Benchtop Analyzer determines package integrity.
Leak Sensors / Detectors

Benchtop Analyzer determines package integrity.

In one analysis, PAC CHECK-® Model 840 lets packagers measure 2 critical variables - residual headspace oxygen (O2) and absolute package leak rate - that determine package shelf-life. Unit produces absolute leak number based on application of Poiseuille's law, which yields total hole diameter leak size based on measurements of pressure and flow. It saves up to 240 data points in internal memory...

Read More »

All Topics