Leads

Leads

Molex Micro-Fit 3.0 Pre-crimped Leads in Stock at TTI

Fort Worth, Texas – February 24, 2021 – TTI, Inc., a leading specialty distributor of electronic components, announces the availability of Off-the-Shelf (OTS) Micro-Fit 3.0 Pre-Crimped Leads, Tin and Gold Plating, from stock at TTI. Molex’s Micro-Fit 3.0 Pre-Crimped Leads offer a simple, cost-effective solution for prototyping, pre-production and mass production requirements. They are...

Read More »
MR Conditional Pacing Lead is smallest available in USA.
Leads

MR Conditional Pacing Lead is smallest available in USA.

Featuring FDA approval, Solia S ProMRI® is availableÂ- with 5.6 French lead body and in 45, 53, and 60 cm lengths. Polyurethane coating over silicone, designed to reduce friction, facilitates introduction through small vessels and complex anatomy, while soft distal segment helps reduce stress and minimize myocardial trauma.

Read More »
Southwire's New MaintenancePRO(TM) Smart Multimeter Wins NECA Showstopper Award
Leads

Southwire's New MaintenancePRO(TM) Smart Multimeter Wins NECA Showstopper Award

New Multimeter with Bluetooth® Connectivity - View, Record, Save Share Test Data CARROLLTON, Ga. - For the fifth consecutive year, Southwire Company, LLC has delivered a product worthy of a National Electrical Contractors Association (NECA) Showstopper Award. Southwire's new MaintenancePRO™ Smart Multimeter was awarded this distinction at the 2015 NECA Show in San Francisco. Southwire...

Read More »
Test Lead Sets are marked with CAT ratings.
Leads

Test Lead Sets are marked with CAT ratings.

Using silicone cable with 2 layers of insulation, Test Leads are designed so that white under-layer becomes visible if outer layer becomes damaged, providing visual alert of potential safety hazard. Test Leads are used by electrical test and safety PAT testers, electrical contractors, and test and repair houses. Products are fully rated for all aspects of IEC61010, particularly with regard to...

Read More »
Test Lead Set withstands temperature extremes.
Leads

Test Lead Set withstands temperature extremes.

Universal Premium Silicone Test Lead Set (Catalog No. 69416) includes one pair of test leads and removable CAT III / CAT IV caps. While silicone-insulated test leads withstand temperatures from -4 to +131°F, strain reliefsÂ- promote durability and toughness. Other features include built-in wear indicator on probe wires, banana-type inputs compatible with most multimeters and clamp...

Read More »
Leads

Test Leads assess lightning protection in wind turbines.

Available in 3 lengths of 328, 164, and 98 ft, KC Series is long enough to be used for assessing continuity of lightning protection conductors in wind turbine blades. Each testing lead comes standard on heavy-duty cable reel that is fitted with friction brake to avoid tangles when reeling out cable. For use with most low resistance ohmmeters,Â- lead sets include 16 ft cable fitted with...

Read More »
Digital Multimeter features 5 1/2 digit resolution. .
Leads

Digital Multimeter features 5 1/2 digit resolution. .

Equipped with dual display, Model DM3058E provides measurement speeds up to 123 readings/sec as well as ability to save or recall up to 10 preset configurations, including built-in cold terminal compensation for thermocouples. LXI-certified unit also features True-RMS AC Voltage measuring from 200 mV to 750 V and True RMS AC CurrentÂ- with measurement range of 20 mA to 10 A. With support for...

Read More »
Manncorp BR790-HD's High-Definition Optics and Real-Time Temperature Profiling Conquer SMD Rework's Most Challenging Tasks
Leads

Manncorp BR790-HD's High-Definition Optics and Real-Time Temperature Profiling Conquer SMD Rework's Most Challenging Tasks

Manncorp's BR790-HD rework system allows operators to safely remove, align, place and solder BGAs, CSPs, ultra-fine-pitch QFPs, and other delicate, heat-sensitive SMDs with unprecedented ease and precision. The BR790-HD's 1.3 million pixel, split-vision optics and 15 high-resolution display make fast, accurate work of component alignment via crystal-clear, superimposed images of leads and solder...

Read More »
Low-Cost Kit Is All You Need to Find Energy Savings
Leads

Low-Cost Kit Is All You Need to Find Energy Savings

3-Phase Power and Energy Data Logger Kit from CAS DataLoggers CHESTERLAND OH — Increasingly, HVAC&R companies, electrical contractors and facilities managers are getting into energy auditing to realize substantial savings for themselves and clients, but many products on the market charge extra for current clamps and memory. CAS DataLoggers and Electrocorder have the solution with the EC-7VAR...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics