Lasers

Lasers

Gas Cleaning Module cuts laser startup time.

NovaGasPurifier(TM) filtering device for Lambda STEEL(TM) industrial excimer lasers does not require He-compressor or water cooling like company's existing cryogenic gas purification systems, so it does not require 50-min. cool down phase. Instead, it is immediately operational. This cuts start up time, reduces window contamination, and increases average gas lifetimes. Lambda STEEL 1000 and STEEL...

Read More »
Rectifiers (Diodes)

Diodes and Receivers meet 10 Gigabit Ethernet specs.

Fabry-Perot (FP) and Distributed Feedback (DFB) laser diodes, indium gallium arsenide (InGaAs) avalanche photodiode (APD), and PIN receivers deliver performance needed by 10 Gigabit Ethernet, DWDM and SONET applications. Un-cooled FP and DFB laser diode chips meet OC192 SONET specifications. FP laser diode chip can transmit over distance of 600 meters, while DFB laser diode chip can transmit over...

Read More »
Lasers

Alignment Kit measures machinery.

Microgage provides precise measurements of machinery straightness, surface flatness, rail and slide parallelism, and squareness of equipment. It consists of compact laser transmitter and digital receiver that captures laser reference beam and provides digital readout of laser's position. Placing laser on moving slide or table allows digital receiver to measure worn areas, locations where binding...

Read More »
Laser Target works with rotating alignment systems.
Alignment Services

Laser Target works with rotating alignment systems.

Indoor scan target, with self-contained numeric readout, is compatible with any manufacturer's continuously sweeping laser alignment system. Model A-1531 has max resolution of 0.010 in. Model A-1532 has max resolution of 0.005 in. Radial range, governed by rotation speed and spot size, is 100 ft. max. Target displays readings relative to target center, relative to zero, or relative to base of...

Read More »
Diode Laser delivers high power.
Lasers

Diode Laser delivers high power.

LightStone(TM) is suited for direct-diode materials processing and as high-power pump source for diode-pumped lasers. It provides 60 W continuous-wave (CW) in 780 to 820 nm wavelength range. Typical operating current and voltage is 70 A at less than 2 V. Beam divergence is less than 40 deg by 10 deg, FWHM. With thermal factor of less than 0.35 deg C/W, unit provides 50% power conversion...

Read More »
Lasers suit micromachining applications.
Lasers

Lasers suit micromachining applications.

HIPPO (High Intensity Peak Power Oscillator) industrial, diode-pumped, solid-state laser delivers short pulse length, less than 15 nsec at 40 Hz, high output power, greater than 17 W at 1064 nm, and beam quality rated at M2 less than 1.2. Lasers are available with output at 1064 nm, frequency doubled to 532 nm (greater than 11 W), and frequency tripled to 355 nm (greater than 4.5 W). ProLite(TM)...

Read More »
Nd:YAG Laser trims, repairs and cuts.
Lasers

Nd:YAG Laser trims, repairs and cuts.

Compact diode-pumped Jasper(TM) is suitable for microelectronics trimming and repair, shorting-bar cutting, and LCD panel repair. It has repetition rates from 100 Hz to 10 KHz with output power greater than 2.5W at 10 KHz. Laser can be triggered directly from control panel or from remote source through rear-panel BNC. Most laser functions can also be controlled from PC via RS-232 port. Q-switched...

Read More »
Optical Imaging System helps build transistors.
Miscellaneous Optics

Optical Imaging System helps build transistors.

CrystaLas(TM) laser-based excimer submodule can be integrated into R&D or manufacturing tool to control large-grain-size-crystal growth for fabrication of thin film transistors (TFTs). Device provides location controlled, high resolution, high power silicon film treatment with low temperature process. It is available with Lambda Physik LPX(R) 210 excimer laser for R&D, or Lambda Physik Lambda...

Read More »
Diode Laser suits direct-diode thermal applications.
Lasers

Diode Laser suits direct-diode thermal applications.

500-micrometer broad-area emitter device is rated at 7 watts, CW. OEM single-stripe diode laser is mounted on 10.5 x 25 mm conduction-cooled package. Typical drive current and compliance voltage is less than 8 amperes and less than 2 volts, respectfully. Spectral width is less than 2.5 nm, FWHM, and beam divergence is less than 350 by 100, FWHM. Diode laser can act as pump source for...

Read More »
Solid State Laser is based on single pump diode.
Lasers

Solid State Laser is based on single pump diode.

Millennia® 5-watt CW green (532 nm) laser incorporates single pump diode with typical lifetime of over 10,000 hours. Rack-mountable power supply utilizes thermoelectric cooler for thermal management of pump diode. Target applications include laser pumping, materials processing, semiconductor wafer inspection, and scientific research.

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers