Lasers

6-Axis Rotary Laser provides unattended fabrication.
Lasers

6-Axis Rotary Laser provides unattended fabrication.

Model FG-150, 3D rotary laser cutting system automatically loads, feeds, laser cuts, and unloads materials with up to 5.9 in. dia. Its 64-bit NC simultaneously controls 3D cutting head and auto-fixturing rotary chuck, enabling system to laser cut precise angle cuts, weld-prep bevels, and contours. Resonators, from 1,500 to 4,000 W, are available. FGCAM software generates NC code, performs dynamic...

Read More »
Laser Systems operate in longitudinal and transverse modes.
Lasers

Laser Systems operate in longitudinal and transverse modes.

The 85 BTA series of compact diode-pumped solid-state (DPSS) laser systems, with output at 442 nm, operate in both single longitudinal and single transverse mode. Lasers include automatic power control for long-term stability. Systems are available with 5, 8, or 10 mW guaranteed output power and are ideal for use in laser induced fluorescence, metrology, and applications where low noise, constant...

Read More »
Laser offers choice of resonators.
Lasers

Laser offers choice of resonators.

STX-44 high-speed CO2 laser cutting system offers sheet metal fabricators choice of 1,500-, 2,500-, or 4,000-watt resonators. Mild steels up to 1 in. thick can be cut with the 4,000 watt system. All systems feature 4 ft x 4 ft bed, Meehanite frame, completely enclosed cutting area, and dust collector that meets FDA Class 1 safety standards. System programs easily either on the machine or...

Read More »
Lasers

Laser Cutting Machine features improved "beam on" time.

TC L 2530 Plus 4 x 8 ft cutting machine has Sprint Axis motion system that provides acceleration up to 1 g and increases productivity up to 40 percent more than company's previous machine. Sprint Axis has working range of 3.9 in. and is synchronized with movements of Y axis. Software evaluates geometry of each part and determines most efficient way to process job. It has 98 x 49 in. working area,...

Read More »
5-Axis Laser Machine drills, cuts, and welds 3-D parts.
Lasers

5-Axis Laser Machine drills, cuts, and welds 3-D parts.

Operating at speeds to 800 in./min in X, Y, Z axes, Model 790 BeamDirector® is accurate to ±0.0004 in. per 20 in. throughout its entire work envelope. Assembled atop granite base, it incorporates rigid X and Z axis assembly and sliding Y axis arm that eliminates droop. System utilizes DC brushless motors, digital motor amplifiers, and integrated Automatic Focus Control(TM) (AFC). Its...

Read More »
Lasers

Laser Cutting Center suits thin and thick plate applications.

Trumatic L 3050 has 5000 watt laser that cuts thin sheet and thick plate at speeds up to 1,600 in./min. It has programmable focus system, DIAS® capacitive height sensing, 4 quick change cutting heads, and Siemens 840D PC controller. Sprintlas® on the fly piercing punches through material up to 1/4 in. thick without stopping cutting head. Options include rotary tube cutter, automated...

Read More »
Laser System detects broken tools.
Lasers

Laser System detects broken tools.

Non-contact NC3, for tool setting, measures tools as small as 0.2 mm diameter anywhere along laser beam. Drip rejection procedures offer protection from unwanted trigger signals. Continuous stream of air flows through Microhole(TM) apertures to protect system from all possible contaminants such as coolant, chips, and graphite. Protection is constant at any orientation and has no effect on...

Read More »
Direct Diode Lasers operate in continuous wave or pulsed mode.
Lasers

Direct Diode Lasers operate in continuous wave or pulsed mode.

Series ISL laser systems deliver up to 4,000 watts and are capable of operating perpendicular to surface of either aluminum (70% reflective) or copper (95% reflective). Water-cooled, microprocessor controlled systems provide light energy with linear polarization at center wavelength of 805 ±10 nm. Minimum pulse width is 1 msec with duty cycle from 0 to 100%. Working distance is 40 to 90 mm...

Read More »
Laser System suits scientific holography applications.
Lasers

Laser System suits scientific holography applications.

Offering single longitudinal mode operation, Tempest iS provides beam pointing and pulse-to-pulse stability as well as single-shot, continuous, and TTL trigger control. Available in 4 different models with repetition rates of 10, 20, and 30 Hz, energy output is rated to 270 mJ. Control panel can remotely operate all laser functions and can be positioned up to 10 ft away from power supply. System...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers