Lasers

CO2 Lasers operate in demanding environments.
Lasers

CO2 Lasers operate in demanding environments.

Based on waveguide design assembled in integrated package, C-Series Lasers deliver either 55 or 70 W output at 10.6 microns and are available as air-cooled or water-cooled units. RF driver is mounted in same housing as laser head, resulting in compact system. All units feature RF supply, and Model C-70 is available in both elliptical and circular beam versions.

Read More »
Laser Diodes produce output power from 10 mW to 2 W.
Lasers

Laser Diodes produce output power from 10 mW to 2 W.

Featuring wavelengths from 730-1,120 nm and output power from 10-200 mW, single-mode diodes can be incorporated into laser modules providing Gaussian output that focuses to small spots. Suited for seismology and hydrophony, DFB diodes offer wavelengths from 763-923 nm and output power from 50-150 mW. DBR diodes are available with 100 mW of output at 1,061 and 1,063 nm or 80 mW at 1,083 nm. Broad...

Read More »
Laser Resonator produces output power of 5,200 W.
Lasers

Laser Resonator produces output power of 5,200 W.

Bylaser 5200 ARC features Adaptive Radius Control, which provides automatic optimization of beam diameter for piercing and cutting of all sheet metal thicknesses and materials. Operation and diagnostics use Laserview via touch screen on operating terminal. Appropriate materials include steel up to 25 mm, stainless steel up to 20 mm, and aluminum up to 12 mm.

Read More »
Laser Toolsetter is configurable for automated operation.
Lasers

Laser Toolsetter is configurable for automated operation.

Housed in stainless steel, NC4 non-contact laser tool setting system features transmitter and receiver units that measure 30 mm in diameter x 35 mm high. It offers repeatable toolsetting at system separations of up to 5 m, and tools as small as 0.2 mm dia can be measured at any selected point along laser beam. Breakage detection can be carried out on tools as small as 0.1 mm. LED, mounted on top...

Read More »
Class 1 Excimer Laser machines complex shapes and patterns.
Lasers

Class 1 Excimer Laser machines complex shapes and patterns.

Micromachining System Model IX-1100 offers range of working UV wavelengths down to 157 nm. Providing multi-axis motion control, it includes high-precision air bearing stages, excimer lasers with soft pre-ionization, and integrated COMO mask indexing air bearing stages, plus beam homogenizers and imaging lenses. CAD conversion software gives users ability to read Autocad, dwg, and dwx files and...

Read More »
Quasi-CW UV Laser delivers 8 W of output at 355 nm.
Lasers

Quasi-CW UV Laser delivers 8 W of output at 355 nm.

Paladin(TM) 355-8000 features compact, modular OEM design that facilitates integration and serviceability. It offers hands-free operation in harsh industrial environments and employs Permalign(TM) manufacturing technology for contamination-free, hermetically sealed package. Product uses AAA(TM) (Aluminum-Free Active Area) pump diodes fiber-coupled at power supply and is suited for laser direct...

Read More »
Pulsed UV Laser enables rapid micromachining.
Lasers

Pulsed UV Laser enables rapid micromachining.

Solid-state, Q-switched, AVIA(TM) Thor(TM) combines pulse energy greater than 500 microjoules with repetition rate of 30 kHz, providing over 15 W of power. PermAlign(TM) mounting eliminates need for periodic optical alignment, while HGX(TM) UV harmonic generation system routinely delivers more than 15,000 hr of third-harmonic crystal lifetime. Laser enables high-throughput via hole drilling in PC...

Read More »
Laser simplifies machine tool calibration.
Lasers

Laser simplifies machine tool calibration.

Modular, expandable XD Series Laser Measurement System gives operators ability to simultaneously measure 1, 3, 5, and 6 degrees of freedom. It includes integrated controller and wireless communication in addition to Ethernet communication capabilities and modular weather station. Portable and upgradeable solution also comes with Winner software. Applications include machine tool and coordinate...

Read More »
Laser System handles engraving, cutting, and marking.
Lasers

Laser System handles engraving, cutting, and marking.

Series XL-9200 features 36 x 24 in. field, and Series XL-12000 features 48 x 24 in. field. Both accommodate broad range of materials. Machine is compatible with 25-150 W air-cooled lasers in single or dual laser configurations for maximum laser power of 300 W. Automatic detection of installed options ensures rapid and error-free machine setups. Optional High Power Density Focusing Optics(TM)...

Read More »

All Topics