Infrared Heaters

Cleaning Products & Equipment

Eraser Co. to Display Products at 2012 Wire Show

Syracuse, NY- The Eraser Company, Inc., manufacturers of wire, cable and tube processing equipment, will display top quality industrial processing equipment at the 2012 Electrical Wire Processing Technology Expo (EWPT) from May 9th to May 10th in Milwaukee, WI - booth #1241. This exciting show provides Eraser with the perfect venue for hands-on demonstration of their extensive line of...

Read More »
HVAC

CCI Thermal Technologies Inc. Announces CSA C/US Explosion-Proof Certification for the Cata-Dyne(TM) CHS Heating System

Edmonton - CCI Thermal Technologies Inc. is pleased to announce our newly certified Cata-Dyne(TM) cCSAus approved heating system for Hazardous Locations Class I, Division II, Group D. The Cata-Dyne(TM) CHS Heating System includes the industry leading Cata-Dyne(TM) infrared gas catalytic heaters coupled with the Cata-Dyne(TM) CHS Control Panel to provide automated start-up and remote control of...

Read More »
HVAC

Modular Cylindrical IR Heaters have clam shell design.

Available to OEMs and capable of 24 hr operation, cylindrical clam shell IR heaters provide precisely controlled heat at medium wavelength that completely surrounds product for uniform effect. Heaters utilize clear or opaque quartz tubes in center with heating elements wrapped around outer surface of quartz. Insulation keeps outside skin at 120° for operator safety, and design failitates...

Read More »
HVAC

Medium Wavelength Infrared Lamps are suitable for thin films and plastics.

Complimentary to various substrates, Fast Response Medium Wavelength Lamps (FRMW) are engineered to optimize radiation of energy within medium wavelength range. Medium wave IR energy output by these heaters is absorbed by water, inks, paints, and plastics. Supplied in lengths up to 52 in., IR lamps are capable of color temperature of 2100°F and peak wavelength of 2.0 microns. This frequency can...

Read More »
Managing the New FGD Wastewater Regulations
Sponsored

Managing the New FGD Wastewater Regulations

EPA Steam Electric Power Generating Effluent Limitations Guidelines, or ELG’s, impact coal-fired power plant operations and their wastewater management. Specifically, the ELG’s impose limits for suspended solids, arsenic, mercury, selenium, and nitrate/nitrite for Flue Gas Desulfurization (FGD) wastewater. These regulations drive the need for technology based solutions that address and adapt to variables such as the nature of wastewater streams, types of contaminants, contaminant loading, and costs. In this guide you will learn about the best available technologies for complying with the new standards. One of the leading contenders in this process is the Fluidized Bed Reactor or FBR, which removes soluble selenium and other metals from FGD wastewater. Advantages of fluidized bed reactors include optimum microorganism efficiency, smaller overall footprint, steady-state operation, lower hydraulic residence times, system robustness, and lower costs. Download this guide for additional information on FBR technology for treating FGD wastewater, including pilot studies and tests, and polishing selenium removal options.

Read More »

Eraser Co. to Display Products at the MD&M West Expo: Booth #1745
Cleaning Products & Equipment

Eraser Co. to Display Products at the MD&M West Expo: Booth #1745

(Syracuse, NY): The Eraser Company, Inc., manufacturers of wire, cable and tube processing equipment, will display their top quality industrial processing equipment at the 2011 Medical Device Manufacturing West Expo (MD&M West) from February 8th through the 10th in Anaheim, CA. This exciting show provides Eraser with the perfect venue for hands-on demonstration of their world-class medical...

Read More »
HVAC

CCI Thermal Technologies Inc. is proud to Introduce the Cata-Dyne(TM) LS, Liquid Start Catalytic Heater

Edmonton - CCI Thermal Technologies Inc is proud to announce the release of the Cata-Dyne(TM) LS. With the same reliability, versatility and ingenuity of the Cata-Dyne(TM) family of heaters the Cata-Dyne(TM) LS has been coupled with an evolution in technology improving start-uptimes from 15 minutes to less than 5 minutes, while simplifying the installation and lowering costs. CCI Thermal centered...

Read More »

Space-Ray to Highlight its Broad Line of 80 Different Heating Models
HVAC

Space-Ray to Highlight its Broad Line of 80 Different Heating Models

IN OVER 400 DIFFERENT HEATING CONFIGURATIONS AT THE 2011 AHR EXPO® CHARLOTTE, N.C. --- Space-Ray Infrared Heaters will highlight one of the most complete lines of infrared heaters in the industry at the at the 2011 AHR Expo® at the Las Vegas Convention Center in Las Vegas, NV, Booth # C238, January 31 to February 2, 2011. The AHR Expo® is the world's largest HVAC&R industry show where leading...

Read More »

Space-Ray Tube Integrity Safety System Highlighted at the AHR Expo
HVAC

Space-Ray Tube Integrity Safety System Highlighted at the AHR Expo

CHARLOTTE, N.C. - Space-Ray Infrared Heaters will show its complete line of tube and ceramic heaters including its recently introduced positive pressure low intensity tube heaters with its patent-pending Innovative Tube Integrity Safety System(TM) (TISS) for the ultimate in fire safety protection at the 2010 AHR Expo®, January 25-27, 2010, Booth #1410 at the Orange County Convention Center in...

Read More »

Eraser to Display Products at MD&M West 2010
Cleaning Products & Equipment

Eraser to Display Products at MD&M West 2010

Syracuse, New York: The Eraser Company, Inc. is proud to be part of the MD&M (Medical Device & Manufacturing) West 2010 show scheduled for February 9th through February 11th in Anaheim, CA (booth #1662). This exciting show provides Eraser with the perfect venue for hands-on demonstration of their line of industrial grade medical (flexible) tubing cutters. Also on display will be Eraser's renowned...

Read More »

Space-Ray to Highlight Its Tube Integrity Safety System for Positive Pressure Low Intensity Tube Heaters at the 2010 AHR EXPO
HVAC

Space-Ray to Highlight Its Tube Integrity Safety System for Positive Pressure Low Intensity Tube Heaters at the 2010 AHR EXPO

CHARLOTTE, N.C. - Space-Ray Infrared Heaters will show its complete line of tube and ceramic heaters including its recently introduced positive pressure low intensity tube heaters with its patent-pending Innovative Tube Integrity Safety System(TM) (TISS) for the ultimate in fire safety protection at the 2010 AHR Expo®, January 25-27, 2010, Booth #1410 at the Orange County Convention Center in...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect Multi-Pocket selectable quick change tool holder, its time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and were pleased to show you why.

Read More »

All Topics