Immersion Heaters

Screw Plug Immersion Heaters feature NPT fittings.
Immersion Heaters

Screw Plug Immersion Heaters feature NPT fittings.

Standard Screw Plug Immersion Heaters are designed at 60 W/in.Â-², 500 W to 18 kW, and 120 V/1 phase to 480 V/3 phase. Threaded fittings ease tank insertion and removal, while tubular heater elements are brazed or welded to NPT fittings for optimal mounting. Offered in 1, 2, and 2½ in. NPT versions, heaters are also available with sheath materials including steel,...

Read More »
Flange Immersion Heaters help control process temperatures.
Immersion Heaters

Flange Immersion Heaters help control process temperatures.

Available with 3–14 in. flanges, Standard Flange Immersion Heaters come in various sheath materials, including 316 passivated SS, steel, copper, and Incoloy® 840. Voltages and wattages range from 60 W/in.Â-², 6 kW, 240 V/1 Phase to 16 W/in.², 167 kW, 480 V/3 Phase. With tubular heater elements brazed or welded to flanges for mounting, heaters are suited for...

Read More »
Process Technology Earns Culus Listing for New Smartone® PTC Aquaculture Heater Line
Immersion Heaters

Process Technology Earns Culus Listing for New Smartone® PTC Aquaculture Heater Line

MENTOR, OHIO - Process Technology, a wet process heating and cooling manufacturer, introduced its SmartOne® line of PTC (positive temperature coefficient) electric immersion heaters in 2011 and is now announcing the product line has earned the cULus listing. With safety as our top priority, we are excited to have introduced such a technologically advanced product that is now the only one on...

Read More »
Immersion Heaters

Heateflex Solar Cell Texturing Process Line of Products

ARCADIA, Calif. - Visit Heateflex at booth 9462 at Intersolar North America 2011, taking place in San Francisco, California on July 12-14th. Heateflex Corporation is the world leader in ultra-pure heating. Heateflex will be featuring a Solar Cell Texturing Tank, as well as the Aquarius® Series Ultra-Pure DI Water Heating System and PFA/PTFE Immersion Heaters at Intersolar North America 2011....

Read More »
An Introduction to Plastic Injection Molding
Sponsored

An Introduction to Plastic Injection Molding

We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.

Read More »
Electric Immersion Heaters have internal temperature regulation.
Immersion Heaters

Electric Immersion Heaters have internal temperature regulation.

SmartOne(TM) positive temperature coefficient electric immersion heaters utilize solid-state ceramic heating elements as heat source. Maximum temperature is internally limited regardless of operating conditions, whether units are operated in water, air, or surrounded by solids. With maximum output temperature below ignition point of most plastic tanks, products do not overheat even when covered...

Read More »
FTH Series Heaters
Immersion Heaters

FTH Series Heaters

Omega's new FTH series of flow through heaters are designed primarily for providing heat that regulates liquid temperature from 32 to 88 degrees Celsius (90 to 190 degrees Fahrenheit). The heaters have a titanium element that resists corrosion. The enclosure is made of ABS plastic and is water resistant. Perfect for Industrial Plants to maintain water temperature as it's pumped around the plant...

Read More »
Immersion Heaters

SPX Subsidiary to Provide 20 Feedwater Heaters for Two Supercritical Coal-Fired Power Plants in India

Feedwater Heaters Designed to Enhance Efficiency for New Power Stations Being Constructed as Part of BARH II Project CHARLOTTE, N.C., Sept. 29 - SPX Corporation (NYSE: SPW) today announced that its wholly-owned subsidiary SPX Heat Transfer, Inc. has been awarded a contract of approximately $18 million to design and manufacture 20 new feedwater heaters for two new coal-fired power plants being...

Read More »
The New Paradigm: Rebuilding Aging Feedwater Heaters, On-Line, with Minimal Downtime
Immersion Heaters

The New Paradigm: Rebuilding Aging Feedwater Heaters, On-Line, with Minimal Downtime

Rebuilding makes better economical sense versus buying new, while allowing utilities to keep up and running. At one Texas generating station, rebuilding saves one-third the cost of new while improving heat efficiency index Used to be an old myth that rebuilding a feedwater heater takes longer than installing a new replacement, or that it couldn't be done with the unit in operation or on-line. Not...

Read More »
Immersion Heaters

Innovative Temperature Technology

Since 1967, JULABO has been recognized as a market leader and technological innovator in producing temperature control instruments. JULABO produces temperature regulating equipment that circulates a thermal fluid for applications ranging from -91 to +335 °C. The product line varies from instruments that heat only (to +335 °C) to highly dynamic instruments with a wide temperature capability...

Read More »
Immersion Heaters

Immersion Heaters help standardize global requirements.

Featuring triangular element pattern and one design that meets all major global certifications, ANSI Flange and Circulation Heaters mount in pipes or vessels to heat liquids and gasses in various process industries. Bussing and Octobox housing are designed to achieve optimal heat distribution and fluid flow, and vertical bussing facilitates installation. Housing works with NPT as well as Gland...

Read More »

All Topics