Mill Type Hydraulic Cylinder provides 2 million load cycles.
Suitable for both 160 and 250 bar pressure ranges, Model CDL2 features 4 different mounting types and stroke lengths up to 3,000 mm. Unit can be used across broad spectrum of applications, including wood and paper production, general machinery construction, recycling, and material handling. Since cylinder is designed for 2 million load cycles, design engineers can accurately calculate...
Read More »
Hydraulic Rod Locks Assist on Movable Pool Bottom Project
Aquatic Development Group uses specially modified Amlok-® product from Advanced Machine & Engineering to protect movable pool floor stability at Ithaca College Aquatic Development Group (ADG) of Cohoes, New York is a professional design, manufacturing and construction firm serving the waterpark, resort, hotel aquarium, aquatic therapy and commercial/institutional swimming pool markets. The...
Read More »
Swing Cylinders suit workholding applications.
Available in top or bottom flange styles, hydraulically activated Swing Cylinders provide single or double-acting operation. Either style can be manifold-mounted, utilizing No. 2 SAE ports, or plumbed conventionally through two No. 4 SAE ports. Offered in 3 sizes with capacities from 1,000-5,000 lb, clamps have non-threaded bodies to facilitate mounting. Piston rotates 90-
Read More »
Mechanical Force Amplifier leverages pounds into tons.
Measuring 7/8 in. dia x 5 in. with 1-½ in. stroke, PowerCylinder(TM) can be driven in 2 ways. With manual operation, handle with 4-bar linkage is coupled with PowerCylinder to deliver 3,000 lb of force from 50 lb grip. As mechatronic unit, closed-loop stepper motor/ball screw modulates PowerCylinder to deliver 3,000 lb of force for braking or control surface applications. Automatic,...
Read More »
5 Unique Applications for Surface Treatment Equipment eBook
The surface requirements and restrictions for components may vary from one industry to another. For this reason, components may have to undergo different types of surface treatments.
Read More »
Hydraulic Cylinders have fixture-integrated design.
Threaded and manifold-mount push cylinders feature nitro carburized steel bodies and stop rings as well as hard chrome plated plungers. Cylinders have BSPP-porting in single and double-acting models. Designed for applications requiring workpiece positioning, holding, clamping, punching, and ejecting, 46 models are available to provide clamping forces from 1.7-39.2 kN and clamping extensions...
Read More »
Double Acting Cylinders lift up to 1,500 tons.
RDA Series is available in variety of models with capacities of 10 through 1,500 tons. Cylinders have collar threads and base mounting holes, so they can be quickly fixtured virtually anywhere, indoors or outdoors. Double-acting design provides means for controlled retraction, while allowing cylinders to produce force in both advance and retract cycle. Internal surfaces are sealed for protection...
Read More »
Hydraulic Cylinders have large hollow hubs.
Short stroke, hydraulic cylinders are designed for installation where independent linear or rotating motion is required through hollow piston. Four standard sizes are available for operating at 3,000 psi with choice of strokes to 4 in. in increments of 1/10 in. Applications include tool and fixture designs, test equipment and structural projects, as well as tooling aids for use in large machine...
Read More »
Hydraulic Cylinders work for pulling or tensioning.
Hydraulic pull cylinders come in 2 or 5 ton capacities with 5 in. of stroke. Made of high quality steel, cylinders incorporate threaded piston and base ends for easy attachment of tooling or accessories. They have plated pistons for corrosion resistance, and 3/8 in. NPT ports with quick disconnect couplers. Optional clevis attachment is available for piston or base end of pull cylinders.
Read More »
NFPA Stainless Steel Tie-Rod Cylinders are pre-lubed.
SS series requires no additional lubrication. Standard 250 psi pneumatic and optional 400 psi non-shock hydraulic cylinders are available with single or double rod end, oversized rods and 1-1/2 to 8 in. bore sizes. Non-rotating SS-NR series has 1-1/2 to 8 in. bores. SS-MSE/MSR versions are available in 2, 3 and 4-stage force multiplying models. Both 125 psi pneumatic and low-pressure hydraulic...
Read More »
Cylinders are available with bore sizes from 3/4 to 8 in.
Q6 Hydro-Line Cylinders come with pressure-energized nitrile rod seals and nonmetallic piston wear rings. Pre-lubricated from factory, cylinders are suitable for non-lubricated air service up to 250 psi. Q6 NFPA-interchangeable cylinders feature precision-machined aluminum end caps and self-aligning, externally removable rod cartridge assemblies. Hydraulic HQ6 tolerates pressures to 400 psi, and...
Read More »
Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application
Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.
Read More »
