Furnaces

Furnaces

CEC to Supply Drop Bottom Furnace to a Major Aerospace Manufacturer

Kennesaw, GA (September 9, 2008) - A major aerospace manufacturer has contracted with Consolidated Engineering Company (CEC) for a drop bottom furnace, to be to be installed in a foundry for aerospace castings in Iowa. The parts being treated are a critical component on the aircraft and must be treated in a precisely controlled manner. Upon inspection of the furnace specifications and engineering...

Read More »
Heating Elements

Diffusion System features bottom-side spray coating.

Including second-generation spray coater that features topside and bottom-side phosphorus coating, along with quartz lined diffusion furnace, Meridian(TM) in-Line diffusion equipment is suited for alternative energy and electronics manufacturing markets. Spray coater has integrated design and uses corrosion resistant materials that minimize risk of process contamination.

Read More »
Furnaces

CEC Sells Titanium Annealing Furnace to D-J Engineering

D-J Engineering, a subsidiary of the D-J Group of Companies, has contracted with Consolidated Engineering Company (CEC) to purchase a titanium annealing furnace. D-J needed a furnace that could handle a wide thermal range of 700°-1350°F with only a ± 8°F tolerance in uniformity and that had the ability to control cool the parts from 1350°F down to 700°F. CEC...

Read More »
Heater and Furnace recycle used oils into free shop heat.
Heaters

Heater and Furnace recycle used oils into free shop heat.

Rated for 250,000 BTU input, RA-250 standard unit space heater and RAD-250 ductable furnace offer full swing-out door, large service panels, and maintenance/service shelf to facilitate combustion chamber and heat exchanger access. Along with oil-preheating system, backflow ash/draft sensor, and operation hour meter, units incorporate air atomizing burner, on-board air compressor, positive...

Read More »
Inert Atmosphere Walk-In Oven
Heaters

Inert Atmosphere Walk-In Oven

No. 907 is an electrically-heated INERT ATMOSPHERE WALK-IN OVEN FROM Grieve, currently used for heat treating graphite tooling molds at a customer's facility. This oven has a maximum operating temperature of 1000°F and workspace dimensions measuring 48"W x 84"D x 72"H. 100 kW total are installed in Incoloy sheathed tubular heating elements, while a 7,800 CFM, 5-HP recirculating blower...

Read More »
Oven Furnace accommodates high-temperature applications.
Furnaces

Oven Furnace accommodates high-temperature applications.

Built to order with customizable dimensions, BTU outputs, and accessories, FireBox-HT oven furnace is designed for tool room heat treating and high-temperature (up to 2,150°F) precision casting. It is insulated with 4 Â-½ in. of firebrick, backed up with additional 2 in. of 1,200°F block insulation. Applications include heating tool steel, carbon steel, cast iron, and other...

Read More »
High-Temperature 2200°F Electtric Inert Atmosphere Furnace from Grieve
Furnaces

High-Temperature 2200°F Electtric Inert Atmosphere Furnace from Grieve

No. 854 is a special high-temperature, 2200OF electrically-heated, inert atmosphere floor furnace from Grieve, currently used for various heat treating applications at a customer's facility. Workspace dimensions measure 24" wide x 48" deep x 24" high. 53KW installed in heavy-gauge, high-temperature Kanthal AF alloy wire, rod overbend design heaters provide maximum operating temperatures to...

Read More »
Heat Treatment Equipment

11,000 LB Weldment Heat Treated

Solar Atmospheres, Souderton, PA, recently heat treated two 4140 (chromium molybdenum) steel weldments, each weighing 11,000 lbs. Using a 12 foot long horizontal loading Solar Manufacturing furnace with a 50,000 lb. capacity, Solar normalized and tempered the weldments to achieve specific yield strength, while minimizing distortion, through controlled heating and cooling. The weldment dimensions...

Read More »
Metal Melting Furnace suits applications up to 1,000°F.
Furnaces

Metal Melting Furnace suits applications up to 1,000°F.

Buzzer furnace melts low temperature white and soft metals including pewter, babbitt, tin, solder, bismuth, lead, zinc, and die casting alloys. It is available with digital controls, high limit safety, and comes in 5 standard sizes with lead capacity from 160 to 2,700 lb. Customization includes special sizes, tilting furnaces, high temperature metals, and bottom drain spout units.

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers