Lens Frames mount on laser leveling equipment.
Precision Lens Frames are produced from aluminum 2011 T3 alloy with .250-80 thread for precision mounting to laser leveling equipment. Outside dimensions are 0.362 in. long with 0.290 in. diameter. Dimensions are held to +/-0.005 in. with some critical dimensions held to within 0.001 in. Final machined parts are deburred for uniform smooth finish without burrs and sharp edges, and then black...
Read More »
Lens Frames mount on laser leveling equipment.
Precision Lens Frames are produced from aluminum 2011 T3 alloy with .250-80 thread for precision mounting to laser leveling equipment. Outside dimensions are 0.362 in. long with 0.290 in. diameter. Dimensions are held to +/-0.005 in. with some critical dimensions held to within 0.001 in. Final machined parts are deburred for uniform smooth finish without burrs and sharp edges, and then black...
Read More »
Framing System uses alloy 6005T6 for higher strength.
Aluminum-profile Series 60, for machine support, linear motion, frame building, and material handling applications, is based on 60 x 60 mm cross-sections. Profiles up to 120 x 240 mm can be complemented by foam-filled combination profiles for cross-section dimensions of 420 x 240 mm. T-Slots permit use of M12 connecting elements, withstanding 2.5 times load of customary M8 screw joints. Alloy...
Read More »
Framing System uses alloy 6005T6 for higher strength.
Aluminum-profile Series 60, for machine support, linear motion, frame building, and material handling applications, is based on 60 x 60 mm cross-sections. Profiles up to 120 x 240 mm can be complemented by foam-filled combination profiles for cross-section dimensions of 420 x 240 mm. T-Slots permit use of M12 connecting elements, withstanding 2.5 times load of customary M8 screw joints. Alloy...
Read More »
Guide to Replacement Fuel Tanks
What to consider when your fuel tank needs to be replaced.
Read More »
Frame Sensor detects parts passing through.
FRS and CAD frame sensors detect part passing thru or dwelling in detection area. Sensors with areas up to 200 x 250 mm can detect parts as small as 4 mm dia. Smaller sensors detect parts down to 2 mm dia. Sensing devices are enclosed in aluminum, industrial housing. Response time is 1 msec and outputs are NPN, PNP, normally open, and normally closed. Power requirement is 24Vdc. On board...
Read More »
Frame Sensor detects parts passing through.
FRS and CAD frame sensors detect part passing thru or dwelling in detection area. Sensors with areas up to 200 x 250 mm can detect parts as small as 4 mm dia. Smaller sensors detect parts down to 2 mm dia. Sensing devices are enclosed in aluminum, industrial housing. Response time is 1 msec and outputs are NPN, PNP, normally open, and normally closed. Power requirement is 24Vdc. On board...
Read More »
Aluminum Framing can be assembled quickly.
Only rubber mallet is require to assemble Quick Frame tubular aluminum framing system. Boltless structural system is lightweight, easy to use, quick to assemble, and available with different mounting choices and accessories. Applications include acoustic enclosures, light duty shelving, display cases, safety guards and conveyor covers.
Read More »
Aluminum Framing can be assembled quickly.
Only rubber mallet is require to assemble Quick Frame tubular aluminum framing system. Boltless structural system is lightweight, easy to use, quick to assemble, and available with different mounting choices and accessories. Applications include acoustic enclosures, light duty shelving, display cases, safety guards and conveyor covers.
Read More »
Trailer Suspension System features neutral-toe axle.
INTRAAX AANT 23K tapered-beam primary air-ride trailer suspension-axle-brake system has capacity of 23,000 lb in ride heights from 13.5 to 17 in. Hanger design allows installation directly to trailer frames with flanges as narrow as 4 in. wide. Applications include haulers running straight-frame platforms, container chassis, liquid tankers, bulk tankers, bottom dumps and livestock trailers.
Read More »
Trailer Suspension System features neutral-toe axle.
INTRAAX AANT 23K tapered-beam primary air-ride trailer suspension-axle-brake system has capacity of 23,000 lb in ride heights from 13.5 to 17 in. Hanger design allows installation directly to trailer frames with flanges as narrow as 4 in. wide. Applications include haulers running straight-frame platforms, container chassis, liquid tankers, bulk tankers, bottom dumps and livestock trailers.
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
