Strain Gage Input Module offers 1,500 Vrms input-to-bus isolation.
Dataforth’s latest addition to the MAQ®20 Data Acquisition & Control System family is the MAQ20-BRDG1 strain gage input module. Each module provides 4 channels of strain gage input in a compact module that can interface to quarter, half, or full-bridge sensors using either a 4- or 6-wire connection. The MAQ20-BRDG1 interfaces to transducers with a nominal resistance of 100Ω to 1kΩ. Four...
Read More »
Strain Gage Input Module offers 1,500 Vrms input-to-bus isolation.
Dataforth’s latest addition to the MAQ-®20 Data Acquisition & Control System family is the MAQ20-BRDG1 strain gage input module. Each module provides 4 channels of strain gage input in a compact module that can interface to quarter, half, or full-bridge sensors using either a 4- or 6-wire connection. The MAQ20-BRDG1 interfaces to transducers with a nominal resistance of 100Ω to 1kΩ. Four...
Read More »Torque Telemetry System features digital output signal.
Utilizing strain gauge technology, TorqueTrak TPM2 provides torque and power monitoring for applications such as material handling equipment, marine, automotive, energy, and power generation. Unit features digital RS422 full duplex, serial interface with user selectable sample rates from 10–4,800 samples/sec. Signal resolution is 15 bits for 8 input ranges from 0–32 mV/V down to 0–0.25...
Read More »Torque Telemetry System features digital output signal.
Utilizing strain gauge technology, TorqueTrak TPM2 provides torque and power monitoring for applications such as material handling equipment, marine, automotive, energy, and power generation. Unit features digital RS422 full duplex, serial interface with user selectable sample rates from 10–4,800 samples/sec. Signal resolution is 15 bits for 8 input ranges from 0–32 mV/V down to 0–0.25...
Read More »
Choosing an Optimal Riot PPE Supplier: 5 Key Factors
This ebook provides 5 key factors to choosing an optimal riot PPE supplier.
Read More »
Crimp Force Monitoring - The Recipe for Success
In my line of work, I have the privilege of visiting many wiring harness shops that produce wiring harnesses for many different industries. One of the common issues I've noticed when visiting shops that use crimp force monitors (CFMs) is that the CFMs are usually turned off, regardless of the brand, because engineers and operators are not using them properly. While I hope this does not apply to...
Read More »
Crimp Force Monitoring - The Recipe for Success
In my line of work, I have the privilege of visiting many wiring harness shops that produce wiring harnesses for many different industries. One of the common issues I've noticed when visiting shops that use crimp force monitors (CFMs) is that the CFMs are usually turned off, regardless of the brand, because engineers and operators are not using them properly. While I hope this does not apply to...
Read More »
Marposs Features in-Process Tool Monitoring System at Westec 2013
Auburn Hills, MI – Marposs Corp. will present its Artis CTM-V5 system with DDU-4 torque and feed force sensor for identifying tool breakage and worn tools at WESTEC 2013 in booth #1946. The DDU-4 sensor is suitable for monitoring drilling and threading (tapping or thread forming) processes, as well as forming processes such as stir friction welding, by means of axial force and torque...
Read More »
Marposs Features in-Process Tool Monitoring System at Westec 2013
Auburn Hills, MI – Marposs Corp. will present its Artis CTM-V5 system with DDU-4 torque and feed force sensor for identifying tool breakage and worn tools at WESTEC 2013 in booth #1946. The DDU-4 sensor is suitable for monitoring drilling and threading (tapping or thread forming) processes, as well as forming processes such as stir friction welding, by means of axial force and torque...
Read More »
Wireless Grip Force Meter helps improve chuck performance.
By measuring holding force of clamped jaws and RPM, wireless digital grip force gauge helps improve and monitor performance of chucks. Turning-center force sensor is available in 72 mm version capable of measuring 2- and 3- jaw chucks or 125 mm version that can measure 2-, 3-, and 4 jaw chucks. Sensor can be used to measure chuck when it is static or dynamic, increasing opportunities for accurate...
Read More »
Wireless Grip Force Meter helps improve chuck performance.
By measuring holding force of clamped jaws and RPM, wireless digital grip force gauge helps improve and monitor performance of chucks. Turning-center force sensor is available in 72 mm version capable of measuring 2- and 3- jaw chucks or 125 mm version that can measure 2-, 3-, and 4 jaw chucks. Sensor can be used to measure chuck when it is static or dynamic, increasing opportunities for accurate...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
