Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, HVAC

Synthetic Dust Collector Filter offers moisture resistance.

Apr 08, 2015

Suitable for harsh, humid environments, HemiPleat® Synthetic is washable and can handle heavy dust loading conditions and/or hygroscopic or sticky dusts. Filter uses lightweight, 100% spun bond polyester media in pleated design that maximizes surface area while maintaining open pleat spacing for optimized dust release during pulse cleaning. Suited for applications up to 160°F, HemiPleat... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

"The Shop of Tomorrow" at NACE Expo 2014 to Include the Mobile Work Station

Jul 29, 2014

The NACE Expo being held July 31st and August 1st at the Cobo Center in Detroit will include "The Shop of Tomorrow". The NACE | CARS is the largest North American conference and exhibition dedicated to the collision and service repairs industries. "The Shop of Tomorrow" will be a demonstration area showing some of the latest technology for today's collision repair businesses, and will include... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Die Cut Membranes suit venting and filtration applications.

Apr 09, 2014

Supplied on rolls or sheets, with or without adhesive backing, Custom Die Cut Membranes are available in wide range of materials including cellulose acetate, nitrocellulose, nylon, PES, PTFE, PVDF, MCE, CA, GF, and PP. Products can be fabricated in variety of formats with pore sizes from 0.2–0.45 microns, depending upon material. Available in diameters from 0.25–60 in., with tolerances of... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Filter End Cap Supports - for Improved Operator Safety and Filter Maintenance

Mar 20, 2013

The new Filter End Cap Support has been launched by Russell Finex to assist operators in the safe assembling and dis-assembling of liquid filters during cleaning and maintenance. The Filter End Cap Support can be installed on a new or existing on-line Russell Eco Filter® and is available for both jacketed and non-jacketed units. The support holds the weight of the end cap and discharge valves,... Read More

Fluid & Gas Flow Equipment, HVAC

Dust Filters are made to withstand harsh environments.

Mar 13, 2013

Suited for dust streams containing moist fumes, heat, chemicals, and abrasive particulate, Astech spunbond polyester cartridges are engineered for durability in tough manufacturing environments. These washable and reusable filters, temperature rated up to 200°F, are 100% non-woven polyester and offer efficiencies up to 99.9%. Intended for manufacturing filtration applications, products are... Read More

Communication Systems & Equipment, Electronic Components & Devices, Fluid & Gas Flow Equipment, Optics & Photonics

Long Pass-Edge Filters offer 10 additional wavelengths.

Dec 13, 2012

Intended for fluorescence imaging and metrology applications, EdgeBasic™ Long Pass-Edge Filters combine steep edge locations from 325–1319 nm, extended blocking at and below laser line, and consistent and extended high transmission pass bands. Featuring hard coated, no burn-out durability, filters are suitable for application-specific Raman spectroscopy when optimized laser-line blocking is... Read More

Electronic Components & Devices, Fluid & Gas Flow Equipment

Raman Longpass Edge Filters detect weak signals, small shifts.

Sep 28, 2012

Suited for Raman spectroscopy or Life Sciences instrumentation, TECHSPEC® Raman Longpass Edge Filters create sharp transition between transmitted Raman signals and blocked laser wavelengths. Single-filter solution, used for reducing spectral noise in Stokes shift applications, have hard coated design. Providing deep blocking for maximum laser rejection, filters come in 325, 355, 473, 488,... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Miller-Leaman's Turbo-Disc Filter a Hit with Customers and the Environment.

Sep 18, 2012

Daytona Beach, Fla. - Miller-Leaman, Inc., a leader in the field of innovative filtration, has had great success with its Turbo-Disc Filter, a product that sets new standards for cooling towers and chilled water filtration. But don't just take it from them; listen to their customers. Kevin Becker works at QuadGraphics, a printing company with locations all across the U.S. "Their Turbo-Disc filter... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Membranes and Filter Media are die-cut to user specifications.

Jan 30, 2012

Designed for separating air, liquids, and particulates, Custom Die-Cut Membranes and Filter Media are manufactured using digital die-less cutting or high-speed die cutting, slitting, multilayer laminating, and special packaging. Products are supplied on rolls or sheets, with or without adhesive backing. Materials include Mupor® PTFE microporous plastic, Typar®, Reemay®, woven/nonwoven filter... Read More

Fluid & Gas Flow Equipment

Acrylic Crossflow Cell enables visual monitoring.

Sep 19, 2011

Featuring transparent acrylic design, Model CF042AC allows users to visually monitor filtration process to optimize research and development discovery and permit exploration of new applications. Standard uses include membrane development testing, flat sheet membrane quality assurance, and RO to MF separation and purification. Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Met-Pro Corporation's Mefiag B.V. Subsidiary Receives Equipment Order Totaling Approximately $550,000

May 13, 2011

Harleysville, PA - Raymond J. De Hont, Chairman and Chief Executive Officer of Met-Pro Corporation (NYSE:MPR), announced today that the Company's Mefiag B.V. subsidiary, in Heerenveen, The Netherlands, has received an order totaling approximately $550,000 from German automotive component manufacturer, Bolta Werke GmbH, to supply all of the high-efficiency filtration systems for one of the world's... Read More

Fluid & Gas Flow Equipment, Green & Clean, Materials & Material Processing

Catalytic Activated Carbon uses coconut shell-based carbon.

Feb 11, 2011

AquaCarb 1240CAT uses coconut shell-based carbon processed to offer enhanced performance capabilities in water treatment. Properties of coconut shell base include elevated adsorption with micropore structure for VOCs, minimized ash content, and optimized hardness/abrasion resistance, which all contribute to longer effective carbon life. Product can help improve results in water quality targets... Read More

Electronic Components & Devices, Fluid & Gas Flow Equipment, Vision Systems

Semrock Patents Confirmed Following Reexamination

Jan 31, 2011

ROCHESTER, N.Y. - The U.S. Patent and Trademark Office (USPTO) has confirmed the validity of four key Semrock patents that were subject to a series of reexamination requests. This rigorous review bolsters the intellectual property of Semrock, Inc., and reconfirms Semrock's patent rights to classes of edge filters, laser-line filters, notch filters, and broadband mirrors. Approximately one year... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, HVAC

Advanced Filtration Concepts Introduces New GT Inlet Filter Accessories

Oct 04, 2010

Advanced Filtration Concepts introduces a new line of accessories for use with various gas turbine inlet air filters. The line includes pre-filter socks/wraps for vee bank style filters and cartridge/canister filters. Pre-filter wraps add an additional stage of filtration and extend the service life of the primary/final filter. These medium efficiency polyester pre-filters are designed to capture... Read More

Cleaning Products & Equipment, Fluid & Gas Flow Equipment, Material Handling & Storage, Mounting & Attaching Products, Safety & Security Equipment

Perfect Machine Protection at IMTS 2010 Booth E-5708

Jun 09, 2010

Hennig, Inc., Machesney Park, Ill., announces their return to IMTS 2010. Visit Booth E-5708 to learn about Hennig's machine protection products featuring: o Telescopic Steel Cover Repair o Chip Disc Filtration (CDF) Systems o Bellows Visit Booth W-2405, for additional Hennig products such as: o Telescopic Steel Covers o Chip Conveyors o Machine Enclosures Other products include roll-up and... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Membrane and Tubing feature optimized surface structure.

Mar 30, 2010

Hyper-Sintered(TM) HSTTM ePTFE Membrane and ePTFE Tubing offer uniformly distributed, high-density interconnected layer on membrane surface. Structure includes spaces to provide bonding sites for lamination to polymer non-wovens or film. Product has high tensile strength and pressure range as well as low coefficient of friction and thin, seamless wall. Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Laservision Polycarbonate Filter 00300

Jun 18, 2009

Laservision offers an exceptional polycarbonate filter that covers OD4+ @ 190-540nm. The 00300 filter is lightweight and is available in all of the frame styles Laservision has to offer. Download the 00300 specification sheet to learn more information about this bright orange colored polycarbonate filter. The 00300 filter has a vast selection of frame styles that can accommodate people who wear... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Membrane Filters are custom die-cut.

Dec 12, 2008

Custom Die Cut Membranes are suited for filtering fluids and gases or venting in medical, pharmaceutical, life sciences, and laboratory equipment. They are manufactured from PTFE, nonwovens, and other materials, and can incorporate intricate shapes, including narrow cross sections and close hole spacing. Membranes are supplied on rolls, with or without adhesive backing, and can be produced from a... Read More