Fluid Filters

Filtration System filters process fluid within tank.
Fluid Filters

Filtration System filters process fluid within tank.

In-Tank Filtration System comes with 50 micron filter cartridge made of corrosion-resistant CPVC with FPM seals for chemical resistance. Single and double filter cartridge models are available, both with choice of WEBSTER(TM) brand Series D or S pumps, which are seal-less and can be run dry. Replacement cartridges are available in 1, 5, 10, 30, 75, and 100 micron ratings with 1 in. ID and...

Read More »
Filter Media suits high-volume painting operations.
Fluid Filters

Filter Media suits high-volume painting operations.

Suitable as primary media or 2nd stage product, Ultra Media features graduated denier fiber construction, needled back layer, and face design engineered to load liquid and solid paint overspray. Media is compatible with range of commercial and industrial paints, including high solids, solvent-based and water-based paints, and clear coats. It handles high solids and water-based paints with average...

Read More »
Backflushing Filter automatically removes coolant.
Fluid Filters

Backflushing Filter automatically removes coolant.

Compact, inline, Mahle Automatic Back-Flushing Filter handles volumes up to 175 gpm and filtration to 10 micron. Utilizing cyclonic chamber to separate solids from coolant prior to reaching filter, final filtration occurs when coolant is forced into center of filter and discharged. Backflushing of self-cleaning filter is initiated by fluid pressures as it is rotated by gear motor. Solid particle...

Read More »
Fluid Filters

Diesel Engine Filter helps meet EPA regulations.

Suited for off-road engines, Rypos Active Filter(TM) removes up to 90% of soot while using 1% of engine output. Since it is made of porous sintered metal mesh, electrical current generated by engine can be passed through it to burn off soot periodically. Automated circuitry monitors process and cleans filter when needed. Rypos Active Filter can be used with diesel oxidation catalyst to reduce...

Read More »
Fluid Conditioning System prevents contaminant build-up.
Fluid Filters

Fluid Conditioning System prevents contaminant build-up.

Utilizing Balanced Charge Agglomeration technology, Agglomerator(TM) improves filtration performance on lubricating, hydraulic, and other non-conductive fluids used in industrial machinery. It also cleans machinery internals over time and improves demulsibility of fluids. Capable of flow-rates of up to 1,200 gph, product can integrate into existing systems to remove sub-micron particles, products...

Read More »
Sump Vacuum features 50 gal tank capacity.
Fluid Filters

Sump Vacuum features 50 gal tank capacity.

Suited for small machine tool sumps, Li'l Sucker utilizes 120 Vac, single-phase, 50 Hz/60 Hz motor. Average suction rate is 85 gpm, and average discharge rate is 40 gpm. Chip basket holds approximately 1.6 cu-ft of chips when full, and polypropylene liner provides 50 micron nominal filtration while vacuuming fluids from sump. When vacuuming is complete, chip basket is removed from machine...

Read More »
In-Line Filters handle air, vacuum, or liquids.
Fluid Filters

In-Line Filters handle air, vacuum, or liquids.

Available in 20, 65, 105, 150, and 250 microns, High-Flow Filters are molded in polyoxymethylene acetal with nylon or polyester screens and color-coded frames that indicate filter micron size. Filters are offered with Â-¼, 5/16, and 3/8 barbs; 10-32, ¼-28, and 1/8 female threads; and 1/16 and 1/8 male threads. They are suited for chemical solutions, ink, water, oil, gasoline, fuel,...

Read More »
Engine Filters decrease flow restriction.
Fluid Filters

Engine Filters decrease flow restriction.

Dual-Flow(TM) Lube Filters provide protection during high idle times, harsh operating conditions, and extended or prolonged service intervals. Design provides low initial restriction to protect engines during cold start-ups and includes heavy-duty steel baseplate and steel retainer welded to media pack end cap. Stacked element design utilizes full-flow element with 100% synthetic Microglass(TM)...

Read More »
Filtration System suits CNC grinding applications.
Fluid Filters

Filtration System suits CNC grinding applications.

Gravity Roll Media Filter, Model GRMC-300 offers coolant flow rate capacity of 30 gpm. Utilizing deep filter cake to provide filtration of grinding swarf, system has positive seal to eliminate fines migration around edges of media. System features 17 in. coolant inlet height and takes 38 in. wide media. It includes integral tank, standard control module, and removable top cover for maintenance.

Read More »

All Topics