Flow Sensor offers electronic alternative to rotameters.
Model 104 Liquid Flo-Sensor measures flow rates of fluids as low as 13 mL/min with ±1.0% linearity (full scale) and ±0.2% repeatability. Stainless steel construction provides compatibility with virtually any chemical, including many solvents and organic compounds. Analog 0 to 5 Vdc output and pulse output are standard. Options include 4 to 20 mA outputs and integrated display.
Read More »
Flow Sensors replace rotameters.
Model 106F Liquid Flo-Sensors measure flow rates of fluids as low as 15 ml/min with +/-1.0% linearity and +/-0.2% repeatability, full scale. Teflon®, Kal-Rez, and sapphire construction provides compatibility with virtually any chemical, including acids or alkalines. Sensors provide electronic alternative to ball-and-tube rotameters. Seven different power and output configurations are...
Read More »
Ultrasonic Flowmeter is easy to install.
Non-invasive portable Model UF10A measures liquid flow with accuracy of 2% over flow ranges of 0.13 to 26 ft/sec. Easy to install, transducers mount directly to pipe materials such as stainless steel, cast iron, PVC, copper, and concrete with diameters of 1/2 to 4-1/2 in. Set up is simple using 15-key tactile keypad. Seven digit LCD indicates flow rate in user programmable units such as GPM, LPM,...
Read More »
Ultrasonic Flowmeter features IP65 construction.
Time Delta M flowmeter offers menu-driven programming via built-in keypad, 4-20mA rating, pulse frequency, totalizer, and alarm outputs. Unit has multiple language support, enabling users to program and view data in their native language. Clamp-on sensors eliminate concerns associated with ultrapure or toxic fluids and contamination.
Read More »
Responsible Spill Remediation in the Food & Beverage Industry
There are two major areas in which food & beverage product handling will take place: processing and distribution. As with all product handling scenarios, spills are an inevitable occurrence within both of these spaces.
Read More »
Flow Meter uses Microwave Doppler technology.
Flow Detect 1000 non-contact flow sensor provides signal indicating flow/no-flow condition of solids or powders in pipelines, air-slides, chutes, bucket elevators, transfer points and conveyor belts. Microwave Doppler technology is virtually unaffected by noise, light, pressure, heat, humidity or dust. Used for automation purposes, Flow Detect 1000 switches process equipment on or off as required.
Read More »
Air Data Boom includes total air temperature sensor.
Model 100900 heated, 4-vane air data boom provides supersonic data collection of angle of attack, angle of sideslip, static pressure, total (pitot) pressure, and total air temperature. Based on heated probe wind-tunnel tested to Mach 1.3, boom is constructed from machined aluminum, stainless steel, and copper alloys. Probe is 28 Vdc powered at 145 A, and meets requirements of MIL-T-5420B and SAE...
Read More »
Flow Meter handles raw sewage, irrigation, and stormwater.
Area-Velocity Flow Meter (AVFM) monitors flow through open channels, partially full sewer pipes, and surcharged pipes without flume or weir. Submerged ultrasonic sensor continuously measures both Velocity and Level in channel. Fouling- and corrosion-resistant sensor is tolerant of turbulence. AVFM can be configured with submerged Velocity/Level sensor, or with submerged velocity and separate...
Read More »
In-line Flow Sensors are used for liquids and gases.
D04 and D10 self-contained flow sensors monitor changes in flow as low as 5 ml/min (0.001 gpm). They connect directly into pipeline and maintain accuracy during changes in media temperature. Sensors are available with discrete transistor output or 4-20 mA analog signal output, both in DC only. Each can be set up for various applications using adjustment potentiometer on front of housing. All...
Read More »Flow Fitting/Sensors are for low-to-high flow measurement.
Positive displacement Type S070 Flow Fitting and Type 8071 Flow Sensor control fluids with max viscosity of 1,000 cP. Combined measuring capabilities are from 0.5 gph to 180 gpm. S070 fitting connects to Hall or reed switch sensors via 1/4-turn and is available with process connections of 1/4 to 3 in. (G or NPT) and up to 2 in. ANSI (flanged). Type 8071 incorporates non-intrusive Hall-effect...
Read More »
Active Flow Switch works in pipes up to 4 ft dia.
FS30 flow switch works with any of company's flow sensors to send output at set flow rate. It can be inserted in pipe sizes 1/2 to 48 in., mounted on sensor or remotely, and set to activate on rise or fall. Set point is input using rotary digital switches. Switch has variable hysteresis or deadband setting to accommodate varying amounts of turbulence. If turbulence is significant, deadband keeps...
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
