Flow Sensors / Detectors

Flow Sensors / Detectors

Ametek Aerospace & Defense Introduces Total Air Probe for Air Data Systems

Innovative Aerospace Instrument Combines Multiple Functions into a Single Versatile Unit WILMINGTON MA - AMETEK Aerospace & Defense has developed the Total Air Probe(TM), an innovative new instrument for Aircraft Air Data Systems that combines multiple air sensor functions into a single unit that saves both weight and installation costs, while increasing accuracy and reliability. The Total Air...

Read More »
Air and Gas Flow Sensor has 200 m/s measuring range.
Flow Sensors / Detectors

Air and Gas Flow Sensor has 200 m/s measuring range.

Featuring 1:1,000 turn-down ratio, SS 20.60 immersion-style sensor incorporates media-resistant sensor tip and modular design that allows for selection of analog, Profibus-DP, or Device-Net interface. Calibration accuracy is 1% of measuring value, and max operating pressure is 230 psig. Compact sensor with attached transformer measures air, nitrogen, CO2, and other gases and can be used in 1-40...

Read More »
Flow Sensors / Detectors

Ultrasonic Transducer Clamps Onto Outside of Small Pipes

Dynasonics DTTS transducer series is designed to provide easy, low cost installation on pipe and rigid tubing sizes from 1/2 (12mm) to 2" (50mm). When matched with any Dynasonics Transit Time transmitter it can replace mechanical flow meters in applications where liquid conditions tend to damage or impede mechanical flow meter operation. The DTTS series does not contact the internal liquid and...

Read More »
Bottle Filling Made Easier with Accurate, Reliable MTS Level Sensors
Flow Sensors / Detectors

Bottle Filling Made Easier with Accurate, Reliable MTS Level Sensors

CARY, N.C (October 17, 2006) -- MTS Systems Corp., Sensors Division's M-Series sensors are currently being used to monitor liquid level in filler bowls--holding tanks that are used for gravity feed flow control for the dispensing of liquids into bottles or containers. Combining the unparalleled accuracy and reliability of MTS magnetostrictive sensors with Temposonics® technology and a sanitary...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Level Sensor tracks inventory in smaller tanks and silos.
Flow Sensors / Detectors

Level Sensor tracks inventory in smaller tanks and silos.

Used in vessels as deep as 30 ft, SmartBob-TS1 can be used to start or stop machinery instantly when product reaches specified level or show whether product is flowing freely. It is unaffected by airborne dust, filling noise, steam, temperature, or measured material's characteristics. When dropped to material surface level, sensor immediately retracts to ensure minimal contact; verifying...

Read More »
Flow Sensors utilize paddlewheel technology.
Flow Sensors / Detectors

Flow Sensors utilize paddlewheel technology.

Suited for fluids ranging from ultrapure water to harsh reagents, Signet 2537 Series blind flow sensors are available with polypropylene or natural PVDF body materials and install in pipe sizes from 0.5-0.8 in. Units offer flow range of 0.3-20 fps, repeatable output of ±0.5% of max range at 77°F, and input frequency of 1-1,000 Hz. Output options include digital S3L data link or 4-20...

Read More »
Flow Sensors / Detectors

Flow Sensor suits sanitary and hygienic applications.

OPTIFLUX 6000 electromagnetic flow sensor features conductivity of greater than 1 Â-µS/cm for non-water and greater than 20 µS/cm for water. It offers cleaning temperature up to 300°F, and with IFC 300 flow converter, provides continuous information on flowmeter state, measurement, and notification of unnoticed application faults. Featuring SS construction, mesh support, and...

Read More »
Flow Sensors / Detectors

Liquid Flow Sensors for OEM Applications

McMillan's 101 & 102 Series Flo-Sensors provide precise liquid flow measurement at affordable prices. The flow sensors can be constructed from plastic or brass, and provide a 0-5VDC analog output proportional to flow rate. Flow rates can be measured as low as 13 mL/minute. With better than ±3.0% linearity (full scale) and 0.2% repeatability (full scale), these flow totalizing systems provide...

Read More »
Flow Sensors / Detectors

Flow Sensors measure gases from 0-50 to 0-500 l/min.

Featuring patented thermal mass flow sensor design, Series 209 Mass FLO-SENSORS minimize zero drift while maintaining linear outputs. Aluminum units include NPT ports and analog output for remote data monitoring. They are suitable for variety of industrial, commercial, laboratory, and OEM applications, including furnace flow control, online gas blending, regulation of sample gas streams, and...

Read More »
Flow Sensors / Detectors

Stainless Steel Liquid Flo-Sensor®

McMillan's Models 104 and 107 Liquid Flo-Sensors precisely measure flow rates of fluids as low as 13 mL/minute, and are designed as an electronic alternative to ball-and-tube rotameters. Stainless steel construction guarantees compatibility with virtually any chemical, including many solvents and organic compounds. ±1.0% linearity (full scale) and ±0.2% repeatability (full scale) provides...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers