New Finishes Products

Polymer produces high-solids floor finishes.

MegatranÃ-® 248 produces floor finish formulations that are easily applied and repaired, and perform well over wide range of temperatures and humidities. Glossy finishes respond well to burnishing, low-speed spray buffing, and frequent ultra-high-speed maintenance. Use of sulfate and sulfonate groups attached to polymer backbone stabilize polymer emulsion particles during drying process.

Water-Based Epoxy suits industrial/marine applications.

Fast Clad(TM) DTM, single-coat, direct-to-metal epoxy finish, provides high film build in one coat of 4-6 mils dry film thickness. Product dries to tough gloss finish, providing corrosion and chemical resistance as well as weathering protection. Applied at 77Ã-ºF, it dries to touch in 45 min and is dry to handle in 4 hr. Low-odor coating meets VOC and HAPS requirements, cleans up with water,...

Polymer produces durable floor finish.

MegatranÃ-® 233 features high gloss characteristics with scuff and scratch resistance. Due to high solids content, formulations based on Megatran 233 polymer require fewer coats than are needed with conventional lower-solids formulations. Use of sulfate and sulfonate groups attached to polymer backbone stabilize polymer emulsion particles during drying process. Finishes respond well to...

Flooring Systems are flexible, seamless, and waterproof.

Two-component, 100% solids, pigmented, polyurethane-base Soft Floor Systems are suitable for balconies, ramps, locker rooms, hospitals, and skating rinks. Soft Floor 6000 is topped with polyurethane or pigmented Polyurea. It can be applied between 10 and 250 mils in one pass without bubbling due to out gassing. Soft Flake 6001 is broadcast with colored vinyl flakes and top coated with clear...

Super Precision Bearings for Machine Tools: Factors For A Successful Spindle Bearing Set Up

This white paper provides an in-depth overview into choosing the right bearing for machine tools.

Special Effects Resins create colorful molded parts.

EFFECTIONS special effects resins come in array of looks, including metallics, glitters, fluorescents, translucents, color shifting, marble, and pastels. Base finishes are customized for each application. Finishes are not only available as pre-colored formulations, but also as color concentrates for use with PROMATCH SM Self-Coloring Service.

Epoxies have no hazardous air pollutants.

Steel Plus epoxies provide packaging and processing machinery with resistance to harsh CIP sanitation and corrosive chemicals, and are impervious to high-pressure washdown and other severe factory conditions. They have no odor and can be applied to steel, galvanized steel, tin, and aluminum. Epoxies are quick drying, resistant to alkalines and acids, and available in 1 or 5 gal sizes. They can be...

Floor Finish suits high-speed maintenance programs.

Gallery ultra high speed (UHS) floor finish provides wet-look gloss and responds quickly to UHS burnishing. It provides mark resistance and durability.

Flair Finishes are used in rotational molding applications.

Chroma-Flair(TM) finishes provide look of pearl finish. Complete line of flair finishes are used on rotational molded parts and are available in alternative color selections, including blue and orange base colors. Effects vary by pellet count per gram. Finishes can be used for outdoor applications and for special effects.

Finishing System operates at 190-

BC40 TRU TEMP(TM) produces high-quality black-oxide finish on iron and steel components in 10 to 15 min. Non-polluting system produces satin, true-black magnetite finish of 0.000020 in. thickness. Compact, 7-tank system eliminates severe splattering and boil-over hazards. Process is suitable for dimensionally-critical parts, including power drive components, gears, and machine parts, and meets...

Finishes can be applied easily to fasteners.

Produced with concentrates, color and antique finishes can be produced without hazardous effluent on parts made of die-cast materials, copper, brass, bronze, nickel, silver, pewter, zinc, and aluminum. Suitable for large- and small- volume tank lines, finishing processes are safe and easy to use in manual or fully automatic modes. Finish comes in Antique Black, Antique Brown, Aluma Black and Zinc...

TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series

For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.