Feedthroughs

Feed-through Panel Connector measures 7/8 in. size.
Electrical Connectors

Feed-through Panel Connector measures 7/8 in. size.

Used with power supply networks, Series 820 threaded-locking feed-through connector connects male and female cable connectors between cabinet and industrial environments. It is available with 5 gold-plated contacts and has rated current of up to 8 A per contact. Each connector is constructed with nickel-plated brass housing and M25x1.5 fixing thread. Unit is IP67-rated protecting from ingress of...

Read More »
Fiber Optic Interface for UHV or High Vacuum Systems
Fiber Optics

Fiber Optic Interface for UHV or High Vacuum Systems

Creating an easy way to use optical fibers with vacuum systems and pressure chambers, Fiberguide Industries' offers its Fiber Optic Feedthroughs. The feedthroughs can be used for any medical, industrial or research application that requires optical interfacing with UHV or high vacuum systems. Fiberguide Industries' feedthrough line provides inlet and outlet tubes through the walls of pressurized...

Read More »
Hermetic Feedthroughs suit high-current applications.
Feedthroughs

Hermetic Feedthroughs suit high-current applications.

Compatible with variety of liquids and gases including refrigerants, oils, heat transfer fluids, and jet fuels, StudSeal(TM) hermetic feedthroughs transfer power into and out of sealed environments at operational loads up to 1,000 A and 15 kV. StudSeals typically consist of threaded rod on both sides of hermetic seal; other standard and custom solutions are available, such as crimp fittings and...

Read More »
Assemblies combine multiple feedthroughs on single plate.
Electrical Terminals

Assemblies combine multiple feedthroughs on single plate.

Custom-designed and fabricated Portplate Assemblies come fully assembled with pre-tested multiple feedthroughs. Plates can house variety of connector densities and counts, as well as mating connectors and fiber optic bulkheads. Provided with or without connectors, assemblies offer full strain relief and are available in 6-48 in. dia sizes. Finished, ready-to-pump plates accommodate mixed...

Read More »
Plastic Knobs
Sponsored

Plastic Knobs

Knobs - Customizable Solutions To learn more about the different types of Knob solutions available, and which ones to select for your specific application, download this guide now.

Read More »
Electric Cable Assemblies

Hermetic Feedthroughs eliminate leak paths.

Available with aluminum, titanium, steel, brass, plastic, or low-out-gassing epoxy housings, Ductorseal® sealed wire and cable assemblies solve through-bulkhead conductor sealing problems by providing interconnecting harness in fully sealed and pre-wired hermetic feedthrough. They are available with various standard or custom wire bundles, and are epoxy-sealed to provide leak-free...

Read More »
Feed-Through offers 2 different termination types.
Feedthroughs

Feed-Through offers 2 different termination types.

With Field Termination Panel Feed-Through M12 Connector, user can choose between IDC termination by use of HARAX® contact blades, or standard crimp termination. Special tools are not necessary when HARAX® product has been chosen, and wide range of shielded cables fit design. D-coded versions for Ethernet applications are offered as well as A-coded panel feed-through connectors.

Read More »
Swivel Heads feature modular design.
Feedthroughs

Swivel Heads feature modular design.

Available in 6 sizes and 12 torques from 0.6-50 lb-ft, SRH Series 180° Swivel Heads consist of SRU rotary modules combined with 2 swivel corners, EDF electric feed-throughs, and MDF media feed-throughs. Connections are accessible and universally equipped with housing connectors or sockets. Media feed-through is directly connected to mounting surfaces of swivel head, and both swivel head and...

Read More »
SMT Feedthrus support operation through 25 GHz.
Feedthroughs

SMT Feedthrus support operation through 25 GHz.

Bell Pin(TM) surface-mount feedthrus are constructed with gold-plated Kovar base and center conductor fired in place with low-loss corning glass. Able to be used at J and K band frequency ranges, products are offered with .009 in. dia pin option and deliver 50 ohm performance. They work with lightweight aluminum or brass housings, mounting to bottom of package to create true surface-mountable...

Read More »
Feedthroughs

Morgan Technical Ceramics Showcases High-Performance Laser Components at Photonics West 2008

14-12-2007 Morgan Technical Ceramics (MTC), a leading manufacturer of innovative ceramic, glass, precious metal, piezoelectric and dielectric materials, will exhibit high performance laser components at booth #6021 at Photonics West 2008 held at the San Jose Convention Center, San Jose, CA, from January 19-24, 2008. MTC will showcase its line of high performance power feedthrus and ceramic...

Read More »
Feed-Through Connectors keep panels sealed.
Feedthroughs

Feed-Through Connectors keep panels sealed.

Constructed with metal design including M12x1 thread locking termination, M12 Feed-Through Connectors are available in 4, 5, and 8 gold-plated contacts with A-coding. Diameter of mounting hole is 20 mm with anti-rotation flats. When properly mated, feed-through adapters maintain environmental protection rating of IP67 at both panel and mating area on each side of adapter.

Read More »

All Topics