Electronic Bridges

Electronic Bridges

Host Bridge for PowerPC® offers optimal I/O connectivity.

Used to interconnect PowerPC processors with subsystems in embedded designs, Tundra Tsi110(TM) integrates communications peripherals such as two 4-lane PCI-Express ports, 4 Gigabit Ethernet (GigE) ports, and one PCI-X port. GigE hardware acceleration off-loads host processor and allows all GigE ports to run at full line rate for data plane applications. Software-compatible with Tsi109 and Tsi108,...

Read More »
Electronic Bridges

VoIP Terminal Adapters target residential and SOHO markets.

Providing router and bridge functions within same unit, Series MTA 6328 exceeds 100 Mbps throughput for all packet sizes when using router function. Model MTA6328-2Re offers 2 FXS ports, 1 LAN and 1 WAN port, while Model MTA 6328-2Re4S offers 1 or 2 FXS ports, 4 LAN ports, and 1 WAN port. Both support T.38 and auto-G7.11 fallback for fax transmission, and include voice packets with priority over...

Read More »
Electronic Bridges

Multi-Protocol Framer suits Ethernet over SONET/SDH systems.

EXtendAR 48M(TM) XRT95L53 maps and de-maps data traffic between SPI-3 interface and standard SONET/SDH interfaces. It supports 48 DS3/E3 and fractional DS3/E3 framers on single chip, as well as flexible encapsulation and framing features including GFP, LAPS, ATM, and PPP/BCP. Device terminates section overhead and line overhead on OC-48/STM-16, 4xOC-12/, 16xOC-3 interfaces. Standard 16-bit...

Read More »
Wireless Analog Bridge/Transceiver has 4 channels of I/O.
Electronic Bridges

Wireless Analog Bridge/Transceiver has 4 channels of I/O.

Model RT12-4411 Wireless analog bridge(TM)/Wire Replication Transceiver converts and replicates wired sensor system into seamless wireless connection between any 4-20 mA, 0-5 Vdc, or 0-10 Vdc signal or sensor and data logger, controller, or SCADA equipment. Bi-directional, full duplex, 12-bit analog I/O enables complete control and monitoring. Features include real-time clock, event logger,...

Read More »
Server connects ARCNET and Ethernet networks.
Electronic Bridges

Server connects ARCNET and Ethernet networks.

Enabling users to access ARCNET network from Ethernet network, Model AI-SRVR functions as ARCNET server by executing communication requests from Ethernet client. Device will receive ARCNET packets and send data to Ethernet clients or reverse process for transmitted packets. Configuration is accomplished through EIA-232 serial port, and once configured, resident web server can be accessed to...

Read More »
Wireless Device suits industrial networking applications.
Electronic Bridges

Wireless Device suits industrial networking applications.

Used with Ethernet switches and other Ethernet-ready devices, AirWorks AWK-1100 may be operated as AP, bridge, or AP client to provide ready access to WLAN. Industrial IEEE 802.11g wireless product features Wi-Fi Protected Access security capability and redundant power inputs. Able to authenticate and authorize wireless users by IEEE 802.1x and RADIUS, plug-and-play solution offers DIN-Rail...

Read More »
Wireless Ethernet Bridge features 15 mile range.
Electronic Bridges

Wireless Ethernet Bridge features 15 mile range.

XPress Ethernet Bridge (XEB(TM)) facilitates communication between host and client Ethernet connections at speeds up to 1.5 Mbps. Operating in 900 MHz ISM band, product is suited for applications where RF environment is full of interference from 2.4 GHz signals emanating from 802.11 networks, portable phones, and microwave ovens. In indoor/urban applications, units can communicate through as many...

Read More »
Ethernet Bridges/Modems utilize 900 MHz technology.
Electronic Bridges

Ethernet Bridges/Modems utilize 900 MHz technology.

With transmit power of 500 mW and receive sensitivity of 104 dBm, SEM Ethernet Bridges and HopNet Modems utilize omni-directional antennas for 20 plus mile range. SEM Series provides high-speed wireless connectivity between Ethernet devices, while HopNet serial and Modbus modems provide high-speed wireless connectivity between serial devices. Based on 900 MHz FHSS WIT910 radio module, both...

Read More »
Electronic Bridges

Serial-to-Ethernet Module is electrically isolated.

Enabling designers to add Ethernet connectivity to IP networks, 1 x 2.5 in. SocketEthernet IP(TM) module integrates Ethernet bridge and complete TCP/IP protocol stack into one universal socket. Model MTXCSEM-HV connects serial devices to IP network, supporting DTE speeds to 230 Kbps. It meets EN 60601-1 requirements for medical electrical equipment safety and includes 10/100BaseT Ethernet, LED...

Read More »
Electronic Bridges

Fiber Optic Bridge extends firewire to 500 m.

Model FB1394B can connect any standard firewire device to host computer up to Â-½ km away over IEEE-1394B fiber optic. Applications requiring long cables, such as security installations, traffic monitoring, and hazardous environment imaging, will find product useful. Typical application would be industrial installation where firewire-based camera located in harsh environment on factory floor...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers