Access Point suits outdoor applications.
Combining BAT 54 and BAT 54 M, WLAN System BAT 54 can be used as Access Point or Bridge for dual-band operation in accordance with IEEE 802.11a from 5.15-5.825 GHz and b/g from 2.4-2.497 GHz. It provides range of more than 20 km at data rate of 54 Mbit/s. For linking up to local network, device has 10/100 Base-T/TX-port for M12 Ethernet connectors, which is designed for half-duplex and full...
Read More »Wireless Solution provides LAN-to-LAN connectivity.
FlightExpress™ 100 Ethernet optical wireless solution is designed for enterprise customers with 2 or more buildings requiring connectivity at distances of 200 m or less. Weighing 9 lb, compact unit provides throughput at full-duplex rate of 100 Mbps, and includes Power over Ethernet (PoE), which eliminates need for additional electrical wiring to power system. FlightExpress 100 system includes...
Read More »Wireless IP/Ethernet Device offers DNP.3 routing.
Solar-friendly, secure MDS entraNET offers Distributed Network Protocol routing over IP backbone network, allowing users to bring mission-critical information over Ethernet or serial gateway and onto IP-based networks. Using MDS entraNET in peer-to-peer networks provides ability to build out large and geographically distributed networks while maintaining near real-time response. It also provides...
Read More »Host Bridge for PowerPC-® offers optimal I/O connectivity.
Used to interconnect PowerPC processors with subsystems in embedded designs, Tundra Tsi110(TM) integrates communications peripherals such as two 4-lane PCI-Express ports, 4 Gigabit Ethernet (GigE) ports, and one PCI-X port. GigE hardware acceleration off-loads host processor and allows all GigE ports to run at full line rate for data plane applications. Software-compatible with Tsi109 and Tsi108,...
Read More »
Industrywide Applications for Deep Drawn Metal Stamping
Deep-drawn metal stamping applies a significant punching force to radically draw metal sheets into a die cavity. Finished components produced by this process tend to have a depth that exceeds their diameter, which is why manufacturers refer to it as "deep-drawn" metal stamping.
Read More »VoIP Terminal Adapters target residential and SOHO markets.
Providing router and bridge functions within same unit, Series MTA 6328 exceeds 100 Mbps throughput for all packet sizes when using router function. Model MTA6328-2Re offers 2 FXS ports, 1 LAN and 1 WAN port, while Model MTA 6328-2Re4S offers 1 or 2 FXS ports, 4 LAN ports, and 1 WAN port. Both support T.38 and auto-G7.11 fallback for fax transmission, and include voice packets with priority over...
Read More »Multi-Protocol Framer suits Ethernet over SONET/SDH systems.
EXtendAR 48M(TM) XRT95L53 maps and de-maps data traffic between SPI-3 interface and standard SONET/SDH interfaces. It supports 48 DS3/E3 and fractional DS3/E3 framers on single chip, as well as flexible encapsulation and framing features including GFP, LAPS, ATM, and PPP/BCP. Device terminates section overhead and line overhead on OC-48/STM-16, 4xOC-12/, 16xOC-3 interfaces. Standard 16-bit...
Read More »
Wireless Analog Bridge/Transceiver has 4 channels of I/O.
Model RT12-4411 Wireless analog bridge(TM)/Wire Replication Transceiver converts and replicates wired sensor system into seamless wireless connection between any 4-20 mA, 0-5 Vdc, or 0-10 Vdc signal or sensor and data logger, controller, or SCADA equipment. Bi-directional, full duplex, 12-bit analog I/O enables complete control and monitoring. Features include real-time clock, event logger,...
Read More »
Server connects ARCNET and Ethernet networks.
Enabling users to access ARCNET network from Ethernet network, Model AI-SRVR functions as ARCNET server by executing communication requests from Ethernet client. Device will receive ARCNET packets and send data to Ethernet clients or reverse process for transmitted packets. Configuration is accomplished through EIA-232 serial port, and once configured, resident web server can be accessed to...
Read More »
Wireless Device suits industrial networking applications.
Used with Ethernet switches and other Ethernet-ready devices, AirWorks AWK-1100 may be operated as AP, bridge, or AP client to provide ready access to WLAN. Industrial IEEE 802.11g wireless product features Wi-Fi Protected Access security capability and redundant power inputs. Able to authenticate and authorize wireless users by IEEE 802.1x and RADIUS, plug-and-play solution offers DIN-Rail...
Read More »
Wireless Ethernet Bridge features 15 mile range.
XPress Ethernet Bridge (XEB(TM)) facilitates communication between host and client Ethernet connections at speeds up to 1.5 Mbps. Operating in 900 MHz ISM band, product is suited for applications where RF environment is full of interference from 2.4 GHz signals emanating from 802.11 networks, portable phones, and microwave ovens. In indoor/urban applications, units can communicate through as many...
Read More »
What Can Test Devices Spin for You?
Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.
Read More »
